Quelle  sdm845-sony-xperia-tama.dtsi   Sprache: unbekannt

// SPDX-License-Identifier: BSD-3-Clause
/*
 * Copyright (c) 2021, Konrad Dybcio <konrad.dybcio@somainline.org>
 */

#include <dt-bindings/input/input.h>
#include <dt-bindings/pinctrl/qcom,pmic-gpio.h>
#include <dt-bindings/regulator/qcom,rpmh-regulator.h>
#include "sdm845.dtsi"
#include "pm8005.dtsi"
#include "pm8998.dtsi"
#include "pmi8998.dtsi"

/ {
 qcom,msm-id = <321 0x20001>; /* SDM845 v2.1 */
 qcom,board-id = <8 0>;

 aliases {
  serial0 = &uart6;
  serial1 = &uart9;
 };

 chosen {
  stdout-path = "serial0:115200n8";
 };

 gpio-keys {
  compatible = "gpio-keys";

  pinctrl-0 = <&focus_n &snapshot_n &vol_down_n &vol_up_n>;
  pinctrl-names = "default";

  key-camera-focus {
   label = "Camera Focus";
   gpios = <&pm8998_gpios 2 GPIO_ACTIVE_LOW>;
   linux,code = <KEY_CAMERA_FOCUS>;
   debounce-interval = <15>;
   linux,can-disable;
   wakeup-source;
  };

  key-camera-snapshot {
   label = "Camera Snapshot";
   gpios = <&pm8998_gpios 7 GPIO_ACTIVE_LOW>;
   linux,code = <KEY_CAMERA>;
   debounce-interval = <15>;
   linux,can-disable;
   wakeup-source;
  };

  key-volume-down {
   label = "Volume Down";
   gpios = <&pm8998_gpios 5 GPIO_ACTIVE_LOW>;
   linux,code = <KEY_VOLUMEDOWN>;
   debounce-interval = <15>;
   linux,can-disable;
   wakeup-source;
  };

  key-volume-up {
   label = "Volume Up";
   gpios = <&pm8998_gpios 6 GPIO_ACTIVE_LOW>;
   linux,code = <KEY_VOLUMEUP>;
   debounce-interval = <15>;
   linux,can-disable;
   wakeup-source;
  };
 };

 cam_vana_front_vreg: cam-vana-front-regulator {
  compatible = "regulator-fixed";
  regulator-name = "cam_vana_front_vreg";
  gpio = <&tlmm 8 GPIO_ACTIVE_HIGH>;
  enable-active-high;

  pinctrl-0 = <&chat_cam_pwr_en>;
  pinctrl-names = "default";
 };

 cam_vana_rear_vreg: cam-vana-rear-regulator {
  compatible = "regulator-fixed";
  regulator-name = "cam_vana_rear_vreg";
  gpio = <&tlmm 27 GPIO_ACTIVE_HIGH>;
  enable-active-high;

  pinctrl-0 = <&main_cam_pwr_en>;
  pinctrl-names = "default";
 };

 cam_vio_vreg: cam-vio-reagulator {
  compatible = "regulator-fixed";
  regulator-name = "cam_vio_vreg";
  gpio = <&pmi8998_gpios 12 GPIO_ACTIVE_HIGH>;
  enable-active-high;

  pinctrl-0 = <&cam_io_en>;
  pinctrl-names = "default";
 };

 vph_pwr: vph-pwr-regulator {
  compatible = "regulator-fixed";
  regulator-name = "vph_pwr";
  regulator-min-microvolt = <3700000>;
  regulator-max-microvolt = <3700000>;
 };

 vreg_s4a_1p8: pm8998-smps4 {
  compatible = "regulator-fixed";
  regulator-name = "vreg_s4a_1p8";

  regulator-min-microvolt = <1800000>;
  regulator-max-microvolt = <1800000>;

  regulator-always-on;
  regulator-boot-on;

  vin-supply = <&vph_pwr>;
 };

 reserved-memory {
  /* SONY was cool and didn't diverge from MTP this time, yay! */
  cont_splash_mem: memory@9d400000 {
   reg = <0x0 0x9d400000 0x0 0x2400000>;
   no-map;
  };

  ramoops@ffc00000 {
   compatible = "ramoops";
   reg = <0x0 0xffc00000 0x0 0x100000>;
   record-size = <0x10000>;
   console-size = <0x60000>;
   ftrace-size = <0x10000>;
   pmsg-size = <0x20000>;
   ecc-size = <16>;
   no-map;
  };
 };
};

&adsp_pas {
 firmware-name = "qcom/sdm845/Sony/tama/adsp.mbn";
 status = "okay";
};

&apps_rsc {
 regulators-0 {
  compatible = "qcom,pm8998-rpmh-regulators";
  qcom,pmic-id = "a";

  vdd-s1-supply = <&vph_pwr>;
  vdd-s2-supply = <&vph_pwr>;
  vdd-s3-supply = <&vph_pwr>;
  vdd-s4-supply = <&vph_pwr>;
  vdd-s5-supply = <&vph_pwr>;
  vdd-s6-supply = <&vph_pwr>;
  vdd-s7-supply = <&vph_pwr>;
  vdd-s8-supply = <&vph_pwr>;
  vdd-s9-supply = <&vph_pwr>;
  vdd-s10-supply = <&vph_pwr>;
  vdd-s11-supply = <&vph_pwr>;
  vdd-s12-supply = <&vph_pwr>;
  vdd-s13-supply = <&vph_pwr>;
  vdd-l1-l27-supply = <&vreg_s7a_0p9>;
  vdd-l2-l8-l17-supply = <&vreg_s3a_1p3>;
  vdd-l3-l11-supply = <&vreg_s7a_0p9>;
  vdd-l4-l5-supply = <&vreg_s7a_0p9>;
  vdd-l6-supply = <&vph_pwr>;
  vdd-l7-l12-l14-l15-supply = <&vreg_s5a_1p9>;
  vdd-l9-supply = <&vreg_s5a_1p9>;
  vdd-l10-l23-l25-supply = <&src_vreg_bob>;
  vdd-l13-l19-l21-supply = <&src_vreg_bob>;
  vdd-l16-l28-supply = <&src_vreg_bob>;
  vdd-l18-l22-supply = <&src_vreg_bob>;
  vdd-l20-l24-supply = <&src_vreg_bob>;
  vdd-l26-supply = <&vreg_s3a_1p3>;
  vin-lvs-1-2-supply = <&vreg_s4a_1p8>;

  vreg_s2a_1p1: smps2 {
   regulator-min-microvolt = <1100000>;
   regulator-max-microvolt = <1100000>;
  };

  vreg_s3a_1p3: smps3 {
   regulator-min-microvolt = <1352000>;
   regulator-max-microvolt = <1352000>;
  };

  vreg_s5a_1p9: smps5 {
   regulator-min-microvolt = <1904000>;
   regulator-max-microvolt = <2040000>;
  };

  vreg_s7a_0p9: smps7 {
   regulator-min-microvolt = <900000>;
   regulator-max-microvolt = <1028000>;
  };

  vreg_l1a_0p9: ldo1 {
   regulator-min-microvolt = <880000>;
   regulator-max-microvolt = <880000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l2a_1p2: ldo2 {
   regulator-min-microvolt = <1200000>;
   regulator-max-microvolt = <1200000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-always-on;
  };

  vreg_l3a_1p0: ldo3 {
   regulator-min-microvolt = <1000000>;
   regulator-max-microvolt = <1000000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l5a_0p8: ldo5 {
   regulator-min-microvolt = <800000>;
   regulator-max-microvolt = <800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l6a_1p8: ldo6 {
   regulator-min-microvolt = <1856000>;
   regulator-max-microvolt = <1856000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l7a_1p8: ldo7 {
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l8a_1p2: ldo8 {
   regulator-min-microvolt = <1200000>;
   regulator-max-microvolt = <1248000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l9a_1p7: ldo9 {
   regulator-min-microvolt = <1704000>;
   regulator-max-microvolt = <2928000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l10a_1p7: ldo10 {
   regulator-min-microvolt = <1704000>;
   regulator-max-microvolt = <2928000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l11a_1p0: ldo11 {
   regulator-min-microvolt = <1000000>;
   regulator-max-microvolt = <1048000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l12a_1p8: ldo12 {
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l13a_1p8: ldo13 {
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <2960000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l14a_1p8: ldo14 {
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-system-load = <62000>;
  };

  vreg_l15a_1p8: ldo15 {
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l16a_2p7: ldo16 {
   regulator-min-microvolt = <2704000>;
   regulator-max-microvolt = <2704000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l17a_1p3: ldo17 {
   regulator-min-microvolt = <1304000>;
   regulator-max-microvolt = <1304000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l18a_2p7: ldo18 {
   regulator-min-microvolt = <2704000>;
   regulator-max-microvolt = <2960000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l19a_2p7: ldo19 {
   regulator-min-microvolt = <2700000>;
   regulator-max-microvolt = <2700000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;

   /*
    * The driver *really* doesn't want this regualtor to exist,
    * saying that it could not get the current voltage (-ENOTRECOVERABLE)
    * even though it surely is used on these devices (as a voltage
    * source for camera autofocus)
    */
   status = "disabled";
  };

  vreg_l20a_2p7: ldo20 {
   regulator-min-microvolt = <2704000>;
   regulator-max-microvolt = <2960000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l21a_2p7: ldo21 {
   regulator-min-microvolt = <2704000>;
   regulator-max-microvolt = <2960000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l22a_2p8: ldo22 {
   regulator-min-microvolt = <2800000>;
   regulator-max-microvolt = <2800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l23a_3p0: ldo23 {
   regulator-min-microvolt = <3000000>;
   regulator-max-microvolt = <3312000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l24a_3p1: ldo24 {
   regulator-min-microvolt = <3088000>;
   regulator-max-microvolt = <3088000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l25a_3p0: ldo25 {
   regulator-min-microvolt = <3000000>;
   regulator-max-microvolt = <3312000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l26a_1p2: ldo26 {
   regulator-min-microvolt = <1200000>;
   regulator-max-microvolt = <1200000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_l28a_2p8: ldo28 {
   regulator-min-microvolt = <2856000>;
   regulator-max-microvolt = <3008000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
   regulator-system-load = <100000>;
  };

  vreg_lvs1a_1p8: lvs1 {
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };

  vreg_lvs2a_1p8: lvs2 {
   regulator-min-microvolt = <1800000>;
   regulator-max-microvolt = <1800000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };
 };

 regulators-1 {
  compatible = "qcom,pmi8998-rpmh-regulators";
  qcom,pmic-id = "b";

  src_vreg_bob: bob {
   regulator-min-microvolt = <3312000>;
   regulator-max-microvolt = <3600000>;
   regulator-initial-mode = <RPMH_REGULATOR_MODE_HPM>;
  };
 };

 regulators-2 {
  compatible = "qcom,pm8005-rpmh-regulators";
  qcom,pmic-id = "c";

  vdd-s1-supply = <&vph_pwr>;
  vdd-s2-supply = <&vph_pwr>;
  vdd-s3-supply = <&vph_pwr>;
  vdd-s4-supply = <&vph_pwr>;

  vreg_s3c_0p6: smps3 {
   regulator-min-microvolt = <600000>;
   regulator-max-microvolt = <600000>;
  };
 };
};

&cdsp_pas {
 firmware-name = "qcom/sdm845/Sony/tama/cdsp.mbn";
 status = "okay";
};

&gcc {
 protected-clocks = <GCC_QSPI_CORE_CLK>,
   <GCC_QSPI_CORE_CLK_SRC>,
   <GCC_QSPI_CNOC_PERIPH_AHB_CLK>,
   <GCC_LPASS_Q6_AXI_CLK>,
   <GCC_LPASS_SWAY_CLK>;
};

&gpi_dma0 {
 status = "okay";
};

&gpi_dma1 {
 status = "okay";
};

&gpu {
 status = "okay";

 zap-shader {
  memory-region = <&gpu_mem>;
  firmware-name = "qcom/sdm845/Sony/tama/a630_zap.mbn";
 };
};

&i2c5 {
 clock-frequency = <400000>;
 status = "okay";

 touchscreen: touchscreen@2c {
  compatible = "syna,rmi4-i2c";
  reg = <0x2c>;

  interrupts-extended = <&tlmm 125 IRQ_TYPE_EDGE_FALLING>;
  vdd-supply = <&vreg_l14a_1p8>;
  /*
   * This is a blatant abuse of OF, but the panel driver *needs*
   * to probe first, as the power/gpio switching needs to be precisely
   * timed in order for both the display and touch panel to function properly.
   */
  incell-supply = <&panel>;

  syna,reset-delay-ms = <220>;
  syna,startup-delay-ms = <1000>;

  pinctrl-0 = <&ts_default>;
  pinctrl-1 = <&ts_sleep>;
  pinctrl-names = "default", "sleep";

  #address-cells = <1>;
  #size-cells = <0>;

  rmi4-f01@1 {
   reg = <0x01>;
   syna,nosleep-mode = <1>;
  };

  rmi4-f12@12 {
   reg = <0x12>;
   syna,sensor-type = <1>;
  };
 };
};

&i2c10 {
 status = "okay";
 clock-frequency = <400000>;

 /* Qcom SMB1355 @ 8, c */
 /* NXP PN547 NFC @ 28 */
 /* Renesas IDTP9221 Qi charger @ 61 */
};

&i2c14 {
 status = "okay";
 clock-frequency = <400000>;

 /* SONY ToF sensor @ 52 */
 /* AMS TCS3490 RGB+IR color sensor @ 72 */
};

&ibb {
 qcom,discharge-resistor-kohms = <300>;
 regulator-min-microvolt = <5500000>;
 regulator-max-microvolt = <5700000>;
 regulator-min-microamp = <0>;
 regulator-max-microamp = <800000>;
 regulator-over-current-protection;
 regulator-soft-start;
 regulator-pull-down;
};

&lab {
 regulator-min-microvolt = <5500000>;
 regulator-max-microvolt = <5700000>;
 regulator-min-microamp = <200000>;
 regulator-max-microamp = <200000>;
 regulator-over-current-protection;
 regulator-soft-start;
 regulator-pull-down;
};

&mdss {
 status = "okay";
};

&mdss_dsi0 {
 vdda-supply = <&vreg_l26a_1p2>;
 status = "okay";

 panel: panel@0 {
  /* The compatible is assigned in device DTs. */
  reg = <0>;

  backlight = <&pmi8998_wled>;
  vddio-supply = <&vreg_l14a_1p8>;
  vsp-supply = <&lab>;
  vsn-supply = <&ibb>;
  panel-reset-gpios = <&tlmm 6 GPIO_ACTIVE_HIGH>;
  touch-reset-gpios = <&tlmm 99 GPIO_ACTIVE_HIGH>;

  pinctrl-0 = <&sde_dsi_active &sde_te_active_sleep>;
  pinctrl-1 = <&sde_dsi_sleep &sde_te_active_sleep>;
  pinctrl-names = "default", "sleep";

  port {
   panel_in: endpoint {
    remote-endpoint = <&mdss_dsi0_out>;
   };
  };
 };
};

&mdss_dsi0_out {
 remote-endpoint = <&panel_in>;
 data-lanes = <0 1 2 3>;
};

&mdss_dsi0_phy {
 vdds-supply = <&vreg_l1a_0p9>;
 status = "okay";
};

&pm8005_gpios {
 gpio-line-names = "NC", /* GPIO_1 */
     "NC",
     "",
     "";
};

&pm8998_gpios {
 gpio-line-names = "NC", /* GPIO_1 */
     "FOCUS_N",
     "",
     "NC",
     "VOL_DOWN_N",
     "VOL_UP_N",
     "SNAPSHOT_N",
     "NC",
     "FLASH_THERM",
     "NC", /* GPIO_10 */
     "LCD_ID",
     "RF_ID",
     "NC",
     "NC",
     "NC",
     "NC",
     "NC",
     "NC",
     "NC",
     "", /* GPIO_20 */
     "NFC_CLK_REQ",
     "",
     "",
     "",
     "",
     "";

 focus_n: focus-n-state {
  pins = "gpio2";
  function = PMIC_GPIO_FUNC_NORMAL;
  power-source = <0>;
  bias-pull-up;
  input-enable;
 };

 vol_down_n: vol-down-n-state {
  pins = "gpio5";
  function = PMIC_GPIO_FUNC_NORMAL;
  power-source = <0>;
  bias-pull-up;
  input-enable;
 };

 vol_up_n: vol-up-n-state {
  pins = "gpio6";
  function = PMIC_GPIO_FUNC_NORMAL;
  power-source = <0>;
  bias-pull-up;
  input-enable;
 };

 snapshot_n: snapshot-n-state {
  pins = "gpio7";
  function = PMIC_GPIO_FUNC_NORMAL;
  power-source = <0>;
  bias-pull-up;
  input-enable;
 };
};

&pmi8998_gpios {
 cam_io_en: cam-io-en-state {
  pins = "gpio12";
  function = "normal";
  qcom,drive-strength = <3>;
  power-source = <0>;
  drive-push-pull;
  output-low;
 };
};

&pmi8998_wled {
 default-brightness = <800>;
 qcom,switching-freq = <800>;
 qcom,ovp-millivolt = <29600>;
 qcom,current-boost-limit = <970>;
 qcom,current-limit-microamp = <20000>;
 qcom,enabled-strings = <0 1 2 3>;
 status = "okay";
};

&qupv3_id_0 {
 status = "okay";
};

&qupv3_id_1 {
 status = "okay";
};

&sdhc_2 {
 status = "okay";

 vmmc-supply = <&vreg_l21a_2p7>;
 vqmmc-supply = <&vreg_l13a_1p8>;
 cd-gpios = <&tlmm 126 GPIO_ACTIVE_HIGH>;
 pinctrl-0 = <&sdc2_default_state>;
 pinctrl-names = "default";
 bus-width = <4>;
 no-sdio;
 no-mmc;
};

&tlmm {
 gpio-reserved-ranges = <0 4>, <81 4>;

 sdc2_default_state: sdc2-default-state {
  clk-pins {
   pins = "sdc2_clk";
   drive-strength = <16>;
   bias-disable;
  };

  cmd-pins {
   pins = "sdc2_cmd";
   drive-strength = <10>;
   bias-pull-up;
  };

  data-pins {
   pins = "sdc2_data";
   drive-strength = <10>;
   bias-pull-up;
  };
 };

 sde_dsi_active: sde-dsi-active-state {
  pins = "gpio6";
  function = "gpio";
  drive-strength = <8>;
  bias-disable;
 };

 sde_dsi_sleep: sde-dsi-sleep-state {
  pins = "gpio6";
  function = "gpio";
  drive-strength = <2>;
  bias-pull-down;
 };

 chat_cam_pwr_en: chat-cam-pwr-en-state {
  pins = "gpio8";
  function = "gpio";
  drive-strength = <2>;
  bias-disable;
  output-low;
 };

 sde_te_active_sleep: sde-te-active-sleep-state {
  pins = "gpio10";
  function = "mdp_vsync";
  drive-strength = <2>;
  bias-pull-down;
 };

 main_cam_pwr_en: main-cam-pwr-en-state {
  pins = "gpio27";
  function = "gpio";
  drive-strength = <2>;
  bias-disable;
  output-low;
 };

 ts_default: ts-default-state {
  reset-pins {
   pins = "gpio99";
   function = "gpio";
   drive-strength = <2>;
   bias-pull-up;
  };

  int-pins {
   pins = "gpio125";
   function = "gpio";
   drive-strength = <2>;
   bias-pull-up;
  };
 };

 ts_sleep: ts-sleep-state {
  reset-pins {
   pins = "gpio99";
   function = "gpio";
   drive-strength = <2>;
   bias-pull-down;
  };

  int-pins {
   pins = "gpio125";
   function = "gpio";
   drive-strength = <2>;
   bias-pull-down;
  };
 };
};

&uart6 {
 status = "okay";
};

&uart9 {
 status = "okay";
};

/* BIG WARNING! DO NOT TOUCH UFS, YOUR DEVICE WILL DIE! */
&ufs_mem_hc { status = "disabled"; };
&ufs_mem_phy { status = "disabled"; };

&usb_1 {
 status = "okay";

 qcom,select-utmi-as-pipe-clk;
};

&usb_1_dwc3 {
 dr_mode = "peripheral";

 maximum-speed = "high-speed";
 phys = <&usb_1_hsphy>;
 phy-names = "usb2-phy";
};

&usb_1_hsphy {
 status = "okay";

 vdd-supply = <&vreg_l1a_0p9>;
 vdda-pll-supply = <&vreg_l12a_1p8>;
 vdda-phy-dpdm-supply = <&vreg_l24a_3p1>;
};

&venus {
 firmware-name = "qcom/sdm845/Sony/tama/venus.mbn";
 status = "okay";
};