Anforderungen  |   Konzepte  |   Entwurf  |   Entwicklung  |   Qualitätssicherung  |   Lebenszyklus  |   Steuerung
 
 
 
 


Quelle  r9a09g057h48-kakip.dts   Sprache: unbekannt

 
// SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
/*
 * Device Tree Source for Yuridenki-Shokai the Kakip board
 *
 * Copyright (C) 2024 Nobuhiro Iwamatsu <iwamatsu@nigauri.org>
 */

/dts-v1/;

#include <dt-bindings/pinctrl/renesas,r9a09g057-pinctrl.h>
#include <dt-bindings/gpio/gpio.h>
#include "r9a09g057.dtsi"

/ {
 model = "Yuridenki-Shokai Kakip Board based on r9a09g057h48";
 compatible = "yuridenki,kakip", "renesas,r9a09g057h48", "renesas,r9a09g057";

 aliases {
  serial0 = &scif;
  mmc0 = &sdhi0;
 };

 chosen {
  stdout-path = "serial0:115200n8";
 };

 memory@48000000 {
  device_type = "memory";
  /* first 128MB is reserved for secure area. */
  reg = <0x0 0x48000000 0x1 0xF8000000>;
 };

 reg_3p3v: regulator-3v3 {
  compatible = "regulator-fixed";
  regulator-name = "fixed-3.3V";
  regulator-min-microvolt = <3300000>;
  regulator-max-microvolt = <3300000>;
  regulator-boot-on;
  regulator-always-on;
 };

 vqmmc_sdhi0: regulator-vccq-sdhi0 {
  compatible = "regulator-gpio";
  regulator-name = "SDHI0 VccQ";
  gpios = <&pinctrl RZV2H_GPIO(A, 0) GPIO_ACTIVE_HIGH>;
  regulator-min-microvolt = <1800000>;
  regulator-max-microvolt = <3300000>;
  gpios-states = <0>;
  states = <3300000 0>, <1800000 1>;
 };
};

&ostm0 {
 status = "okay";
};

&ostm1 {
 status = "okay";
};

&ostm2 {
 status = "okay";
};

&ostm3 {
 status = "okay";
};

&ostm4 {
 status = "okay";
};

&ostm5 {
 status = "okay";
};

&ostm6 {
 status = "okay";
};

&ostm7 {
 status = "okay";
};

&pinctrl {
 scif_pins: scif {
  pins =  "SCIF_RXD", "SCIF_TXD";
 };

 sd0-pwr-en-hog {
  gpio-hog;
  gpios = <RZV2H_GPIO(A, 1) GPIO_ACTIVE_HIGH>;
  output-high;
  line-name = "sd0_pwr_en";
 };

 sdhi0_pins: sd0 {
  sd0-clk {
   pins = "SD0CLK";
   renesas,output-impedance = <3>;
   slew-rate = <0>;
  };

  sd0-data {
   pins = "SD0DAT0", "SD0DAT1", "SD0DAT2", "SD0DAT3", "SD0CMD";
   input-enable;
   renesas,output-impedance = <3>;
   slew-rate = <0>;
  };

  sd0-mux {
   pinmux = <RZV2H_PORT_PINMUX(A, 5, 15)>; /* SD0_CD */
  };
 };
};

&qextal_clk {
 clock-frequency = <24000000>;
};

&scif {
 pinctrl-0 = <&scif_pins>;
 pinctrl-names = "default";

 status = "okay";
};

&sdhi0 {
 pinctrl-0 = <&sdhi0_pins>;
 pinctrl-names = "default";
 vmmc-supply = <®_3p3v>;
 vqmmc-supply = <&vqmmc_sdhi0>;
 bus-width = <4>;

 status = "okay";
};

[ Dauer der Verarbeitung: 0.4 Sekunden  (vorverarbeitet)  ]

                                                                                                                                                                                                                                                                                                                                                                                                     


Neuigkeiten

     Aktuelles
     Motto des Tages

Software

     Produkte
     Quellcodebibliothek

Aktivitäten

     Artikel über Sicherheit
     Anleitung zur Aktivierung von SSL

Muße

     Gedichte
     Musik
     Bilder

Jenseits des Üblichen ....
    

Besucherstatistik

Besucherstatistik

Monitoring

Montastic status badge