Anforderungen  |   Konzepte  |   Entwurf  |   Entwicklung  |   Qualitätssicherung  |   Lebenszyklus  |   Steuerung
 
 
 
 


Quelle  uniphier-ld20-akebi96.dts   Sprache: unbekannt

 
// SPDX-License-Identifier: GPL-2.0+ OR MIT
//
// Device Tree Source for Akebi96 Development Board
//
// Derived from uniphier-ld20-global.dts.
//
// Copyright (C) 2015-2017 Socionext Inc.
// Copyright (C) 2019-2020 Linaro Ltd.

/dts-v1/;
#include <dt-bindings/gpio/uniphier-gpio.h>
#include "uniphier-ld20.dtsi"

/ {
 model = "Akebi96";
 compatible = "socionext,uniphier-ld20-akebi96",
       "socionext,uniphier-ld20";

 chosen {
  stdout-path = "serial0:115200n8";
 };

 aliases {
  serial0 = &serial0;
  serial1 = &serial1;
  serial2 = &serial2;
  serial3 = &serial3;
  i2c0 = &i2c0;
  i2c1 = &i2c1;
  i2c2 = &i2c2;
  i2c3 = &i2c3;
  i2c4 = &i2c4;
  i2c5 = &i2c5;
  spi0 = &spi0;
  spi1 = &spi1;
  spi2 = &spi2;
  spi3 = &spi3;
  ethernet0 = ð
 };

 memory@80000000 {
  device_type = "memory";
  reg = <0 0x80000000 0 0xc0000000>;
 };

 framebuffer@c0000000 {
  compatible = "simple-framebuffer";
  reg = <0 0xc0000000 0 0x02000000>;
  width = <1920>;
  height = <1080>;
  stride = <7680>;
  format = "a8r8g8b8";
 };

 reserved-memory {
  #address-cells = <2>;
  #size-cells = <2>;
  ranges;

  memory@c0000000 {
   reg = <0 0xc0000000 0 0x02000000>;
   no-map;
  };
 };

 sound {
  compatible = "audio-graph-card";
  label = "UniPhier LD20";
  dais = <&spdif_port0
   &comp_spdif_port0>;
 };

 spdif-out {
  compatible = "linux,spdif-dit";
  #sound-dai-cells = <0>;

  port@0 {
   spdif_tx: endpoint {
    remote-endpoint = <&spdif_hiecout1>;
   };
  };
 };

 comp-spdif-out {
  compatible = "linux,spdif-dit";
  #sound-dai-cells = <0>;

  port@0 {
   comp_spdif_tx: endpoint {
    remote-endpoint = <&comp_spdif_hiecout1>;
   };
  };
 };

 firmware {
  optee {
   compatible = "linaro,optee-tz";
   method = "smc";
  };
 };
};

&spi3 {
 status = "okay";
 #address-cells = <1>;
 #size-cells = <0>;
 usb-over-spi@0 {
  compatible = "maxim,max3421-udc";
  reg = <0>;
  spi-max-frequency = <12500000>;
  interrupt-parent = <&gpio>;
  interrupt-names = "udc";
  interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
 };
};

&serial0 {
 /* Onboard USB-UART */
 status = "okay";
};

&serial2 {
 /* LS connector UART1 */
 status = "okay";
};

&serial3 {
 /* LS connector UART0 */
 status = "okay";
};

&spdif_hiecout1 {
 remote-endpoint = <&spdif_tx>;
};

&comp_spdif_hiecout1 {
 remote-endpoint = <&comp_spdif_tx>;
};

&i2c0 {
 /* LS connector I2C0 */
 status = "okay";
};

&i2c1 {
 /* LS connector I2C1 */
 status = "okay";
};

ð {
 status = "okay";
 phy-handle = <ðphy>;
};

&mdio {
 ethphy: ethernet-phy@0 {
  reg = <0>;
 };
};

&usb {
 status = "okay";
};

&pcie {
 status = "okay";
};

&gpio {
 /* IRQs for Max3421 */
 xirq0-hog {
  gpio-hog;
  gpios = <UNIPHIER_GPIO_IRQ(0) 1>;
  input;
 };
 xirq10-hog {
  gpio-hog;
  gpios = <UNIPHIER_GPIO_IRQ(10) 1>;
  input;
 };
};

&pinctrl_aout1 {
 groups = "aout1b";
};

&pinctrl_uart3 {
 groups = "uart3", "uart3_ctsrts";
};

[ Dauer der Verarbeitung: 0.2 Sekunden  (vorverarbeitet)  ]

                                                                                                                                                                                                                                                                                                                                                                                                     


Neuigkeiten

     Aktuelles
     Motto des Tages

Software

     Produkte
     Quellcodebibliothek

Aktivitäten

     Artikel über Sicherheit
     Anleitung zur Aktivierung von SSL

Muße

     Gedichte
     Musik
     Bilder

Jenseits des Üblichen ....
    

Besucherstatistik

Besucherstatistik

Monitoring

Montastic status badge