Anforderungen  |   Konzepte  |   Entwurf  |   Entwicklung  |   Qualitätssicherung  |   Lebenszyklus  |   Steuerung
 
 
 
 


Quelle  stm32mp211.dtsi   Sprache: unbekannt

 
// SPDX-License-Identifier: (GPL-2.0-only OR BSD-3-Clause)
/*
 * Copyright (C) STMicroelectronics 2025 - All Rights Reserved
 * Author: Alexandre Torgue <alexandre.torgue@foss.st.com> for STMicroelectronics.
 */
#include <dt-bindings/interrupt-controller/arm-gic.h>

/ {
 #address-cells = <2>;
 #size-cells = <2>;

 cpus {
  #address-cells = <1>;
  #size-cells = <0>;

  cpu0: cpu@0 {
   compatible = "arm,cortex-a35";
   reg = <0>;
   device_type = "cpu";
   enable-method = "psci";
  };
 };

 arm-pmu {
  compatible = "arm,cortex-a35-pmu";
  interrupts = <GIC_SPI 368 IRQ_TYPE_LEVEL_HIGH>;
  interrupt-affinity = <&cpu0>;
  interrupt-parent = <&intc>;
 };

 arm_wdt: watchdog {
  compatible = "arm,smc-wdt";
  arm,smc-id = <0xbc000000>;
  status = "disabled";
 };

 ck_flexgen_08: clock-64000000 {
  compatible = "fixed-clock";
  #clock-cells = <0>;
  clock-frequency = <64000000>;
 };

 ck_flexgen_51: clock-200000000 {
  compatible = "fixed-clock";
  #clock-cells = <0>;
  clock-frequency = <200000000>;
 };

 firmware {
  optee {
   compatible = "linaro,optee-tz";
   method = "smc";
  };

  scmi: scmi {
   compatible = "linaro,scmi-optee";
   #address-cells = <1>;
   #size-cells = <0>;
   linaro,optee-channel-id = <0>;

   scmi_clk: protocol@14 {
    reg = <0x14>;
    #clock-cells = <1>;
   };

   scmi_reset: protocol@16 {
    reg = <0x16>;
    #reset-cells = <1>;
   };
  };
 };

 psci {
  compatible = "arm,psci-1.0";
  method = "smc";
 };

 timer {
  compatible = "arm,armv8-timer";
  interrupt-parent = <&intc>;
  interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
        <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
        <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>,
        <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(1) | IRQ_TYPE_LEVEL_LOW)>;
  arm,no-tick-in-suspend;
 };

 soc@0 {
  compatible = "simple-bus";
  ranges = <0x0 0x0 0x0 0x0 0x80000000>;
  dma-ranges = <0x0 0x0 0x80000000 0x1 0x0>;
  interrupt-parent = <&intc>;
  #address-cells = <1>;
  #size-cells = <2>;

  rifsc: bus@42080000 {
   compatible = "simple-bus";
   reg = <0x42080000 0x0 0x1000>;
   ranges;
   dma-ranges;
   #address-cells = <1>;
   #size-cells = <2>;

   usart2: serial@400e0000 {
    compatible = "st,stm32h7-uart";
    reg = <0x400e0000 0x0 0x400>;
    interrupts = <GIC_SPI 102 IRQ_TYPE_LEVEL_HIGH>;
    clocks = <&ck_flexgen_08>;
    status = "disabled";
   };
  };

  syscfg: syscon@44230000 {
   compatible = "st,stm32mp21-syscfg", "syscon";
   reg = <0x44230000 0x0 0x10000>;
  };

  intc: interrupt-controller@4ac10000 {
   compatible = "arm,gic-400";
   reg = <0x4ac10000 0x0 0x1000>,
         <0x4ac20000 0x0 0x20000>,
         <0x4ac40000 0x0 0x20000>,
         <0x4ac60000 0x0 0x20000>;
         #interrupt-cells = <3>;
         interrupt-controller;
  };
 };
};

[ Dauer der Verarbeitung: 0.2 Sekunden  (vorverarbeitet)  ]

                                                                                                                                                                                                                                                                                                                                                                                                     


Neuigkeiten

     Aktuelles
     Motto des Tages

Software

     Produkte
     Quellcodebibliothek

Aktivitäten

     Artikel über Sicherheit
     Anleitung zur Aktivierung von SSL

Muße

     Gedichte
     Musik
     Bilder

Jenseits des Üblichen ....
    

Besucherstatistik

Besucherstatistik

Monitoring

Montastic status badge