Quelle bmi323.h
Sprache: C
/* SPDX-License-Identifier: GPL-2.0 */ /* * IIO driver for Bosch BMI323 6-Axis IMU * * Copyright (C) 2023, Jagath Jog J <jagathjog1996@gmail.com> #ifndef _BMI323_H_#define _BMI323_H_#include <linux/bits.h>#include <linux/regmap.h>#include <linux/units.h>#define BMI323_I2C_DUMMY 2#define BMI323_SPI_DUMMY 1/* Register map */ #define BMI323_CHIP_ID_REG 0x00#define BMI323_CHIP_ID_VAL 0x0043#define BMI323_CHIP_ID_MSK GENMASK(7, 0)#define BMI323_ERR_REG 0x01#define BMI323_STATUS_REG 0x02#define BMI323_STATUS_POR_MSK BIT(0)/* Accelero/Gyro/Temp data registers */ #define BMI323_ACCEL_X_REG 0x03#define BMI323_GYRO_X_REG 0x06#define BMI323_TEMP_REG 0x09#define BMI323_ALL_CHAN_MSK GENMASK(5, 0)/* Status registers */ #define BMI323_STATUS_INT1_REG 0x0D#define BMI323_STATUS_INT2_REG 0x0E#define BMI323_STATUS_NOMOTION_MSK BIT(0)#define BMI323_STATUS_MOTION_MSK BIT(1)#define BMI323_STATUS_STP_WTR_MSK BIT(5)#define BMI323_STATUS_TAP_MSK BIT(8)#define BMI323_STATUS_ERROR_MSK BIT(10)#define BMI323_STATUS_TMP_DRDY_MSK BIT(11)#define BMI323_STATUS_GYR_DRDY_MSK BIT(12)#define BMI323_STATUS_ACC_DRDY_MSK BIT(13)#define BMI323_STATUS_ACC_GYR_DRDY_MSK GENMASK(13, 12)#define BMI323_STATUS_FIFO_WTRMRK_MSK BIT(14)#define BMI323_STATUS_FIFO_FULL_MSK BIT(15)/* Feature registers */ #define BMI323_FEAT_IO0_REG 0x10#define BMI323_FEAT_IO0_XYZ_NOMOTION_MSK GENMASK(2, 0)#define BMI323_FEAT_IO0_XYZ_MOTION_MSK GENMASK(5, 3)#define BMI323_FEAT_XYZ_MSK GENMASK(2, 0)#define BMI323_FEAT_IO0_STP_CNT_MSK BIT(9)#define BMI323_FEAT_IO0_S_TAP_MSK BIT(12)#define BMI323_FEAT_IO0_D_TAP_MSK BIT(13)#define BMI323_FEAT_IO1_REG 0x11#define BMI323_FEAT_IO1_ERR_MSK GENMASK(3, 0)#define BMI323_FEAT_IO2_REG 0x12#define BMI323_FEAT_IO_STATUS_REG 0x14#define BMI323_FEAT_IO_STATUS_MSK BIT(0)#define BMI323_FEAT_ENG_POLL 2000#define BMI323_FEAT_ENG_TIMEOUT 10000/* FIFO registers */ #define BMI323_FIFO_FILL_LEVEL_REG 0x15#define BMI323_FIFO_DATA_REG 0x16/* Accelero/Gyro config registers */ #define BMI323_ACC_CONF_REG 0x20#define BMI323_GYRO_CONF_REG 0x21#define BMI323_ACC_GYRO_CONF_MODE_MSK GENMASK(14, 12)#define BMI323_ACC_GYRO_CONF_ODR_MSK GENMASK(3, 0)#define BMI323_ACC_GYRO_CONF_SCL_MSK GENMASK(6, 4)#define BMI323_ACC_GYRO_CONF_BW_MSK BIT(7)#define BMI323_ACC_GYRO_CONF_AVG_MSK GENMASK(10, 8)/* FIFO registers */ #define BMI323_FIFO_WTRMRK_REG 0x35#define BMI323_FIFO_CONF_REG 0x36#define BMI323_FIFO_CONF_STP_FUL_MSK BIT(0)#define BMI323_FIFO_CONF_ACC_GYR_EN_MSK GENMASK(10, 9)#define BMI323_FIFO_ACC_GYR_MSK GENMASK(1, 0)#define BMI323_FIFO_CTRL_REG 0x37#define BMI323_FIFO_FLUSH_MSK BIT(0)/* Interrupt pin config registers */ #define BMI323_IO_INT_CTR_REG 0x38#define BMI323_IO_INT1_LVL_MSK BIT(0)#define BMI323_IO_INT1_OD_MSK BIT(1)#define BMI323_IO_INT1_OP_EN_MSK BIT(2)#define BMI323_IO_INT1_LVL_OD_OP_MSK GENMASK(2, 0)#define BMI323_IO_INT2_LVL_MSK BIT(8)#define BMI323_IO_INT2_OD_MSK BIT(9)#define BMI323_IO_INT2_OP_EN_MSK BIT(10)#define BMI323_IO_INT2_LVL_OD_OP_MSK GENMASK(10, 8)#define BMI323_IO_INT_CONF_REG 0x39#define BMI323_IO_INT_LTCH_MSK BIT(0)#define BMI323_INT_MAP1_REG 0x3A#define BMI323_INT_MAP2_REG 0x3B#define BMI323_NOMOTION_MSK GENMASK(1, 0)#define BMI323_MOTION_MSK GENMASK(3, 2)#define BMI323_STEP_CNT_MSK GENMASK(11, 10)#define BMI323_TAP_MSK GENMASK(1, 0)#define BMI323_TMP_DRDY_MSK GENMASK(7, 6)#define BMI323_GYR_DRDY_MSK GENMASK(9, 8)#define BMI323_ACC_DRDY_MSK GENMASK(11, 10)#define BMI323_FIFO_WTRMRK_MSK GENMASK(13, 12)#define BMI323_FIFO_FULL_MSK GENMASK(15, 14)/* Feature registers */ #define BMI323_FEAT_CTRL_REG 0x40#define BMI323_FEAT_ENG_EN_MSK BIT(0)#define BMI323_FEAT_DATA_ADDR 0x41#define BMI323_FEAT_DATA_TX 0x42#define BMI323_FEAT_DATA_STATUS 0x43#define BMI323_FEAT_DATA_TX_RDY_MSK BIT(1)#define BMI323_FEAT_EVNT_EXT_REG 0x47#define BMI323_FEAT_EVNT_EXT_S_MSK BIT(3)#define BMI323_FEAT_EVNT_EXT_D_MSK BIT(4)#define BMI323_CMD_REG 0x7E#define BMI323_RST_VAL 0xDEAF#define BMI323_CFG_RES_REG 0x7F/* Extended registers */ #define BMI323_GEN_SET1_REG 0x02#define BMI323_GEN_SET1_MODE_MSK BIT(0)#define BMI323_GEN_HOLD_DUR_MSK GENMASK(4, 1)/* Any Motion/No Motion config registers */ #define BMI323_ANYMO1_REG 0x05#define BMI323_NOMO1_REG 0x08#define BMI323_MO2_OFFSET 0x01#define BMI323_MO3_OFFSET 0x02#define BMI323_MO1_REF_UP_MSK BIT(12)#define BMI323_MO1_SLOPE_TH_MSK GENMASK(11, 0)#define BMI323_MO2_HYSTR_MSK GENMASK(9, 0)#define BMI323_MO3_DURA_MSK GENMASK(12, 0)/* Step counter config registers */ #define BMI323_STEP_SC1_REG 0x10#define BMI323_STEP_SC1_WTRMRK_MSK GENMASK(9, 0)#define BMI323_STEP_SC1_RST_CNT_MSK BIT(10)#define BMI323_STEP_LEN 2/* Tap gesture config registers */ #define BMI323_TAP1_REG 0x1E#define BMI323_TAP1_AXIS_SEL_MSK GENMASK(1, 0)#define BMI323_AXIS_XYZ_MSK GENMASK(1, 0)#define BMI323_TAP1_TIMOUT_MSK BIT(2)#define BMI323_TAP1_MAX_PEAKS_MSK GENMASK(5, 3)#define BMI323_TAP1_MODE_MSK GENMASK(7, 6)#define BMI323_TAP2_REG 0x1F#define BMI323_TAP2_THRES_MSK GENMASK(9, 0)#define BMI323_TAP2_MAX_DUR_MSK GENMASK(15, 10)#define BMI323_TAP3_REG 0x20#define BMI323_TAP3_QUIET_TIM_MSK GENMASK(15, 12)#define BMI323_TAP3_QT_BW_TAP_MSK GENMASK(11, 8)#define BMI323_TAP3_QT_AFT_GES_MSK GENMASK(15, 12)#define BMI323_MOTION_THRES_SCALE 512#define BMI323_MOTION_HYSTR_SCALE 512#define BMI323_MOTION_DURAT_SCALE 50#define BMI323_TAP_THRES_SCALE 512#define BMI323_DUR_BW_TAP_SCALE 200#define BMI323_QUITE_TIM_GES_SCALE 25#define BMI323_MAX_GES_DUR_SCALE 25/* * The formula to calculate temperature in C. * See datasheet section 6.1.1, Register Map Overview * * T_C = (temp_raw / 512) + 23 #define BMI323_TEMP_OFFSET 11776#define BMI323_TEMP_SCALE 1953125/* * The BMI323 features a FIFO with a capacity of 2048 bytes. Each frame * consists of accelerometer (X, Y, Z) data and gyroscope (X, Y, Z) data, * totaling 6 words or 12 bytes. The FIFO buffer can hold a total of * 170 frames. * * If a watermark interrupt is configured for 170 frames, the interrupt will * trigger when the FIFO reaches 169 frames, so limit the maximum watermark * level to 169 frames. In terms of data, 169 frames would equal 1014 bytes, * which is approximately 2 frames before the FIFO reaches its full capacity. * See datasheet section 5.7.3 FIFO Buffer Interrupts #define BMI323_BYTES_PER_SAMPLE 2#define BMI323_FIFO_LENGTH_IN_BYTES 2048#define BMI323_FIFO_FRAME_LENGTH 6#define BMI323_FIFO_FULL_IN_FRAMES \#define BMI323_FIFO_FULL_IN_WORDS \#define BMI323_INT_MICRO_TO_RAW(val, val2, scale) ((val) * (scale) + \#define BMI323_RAW_TO_MICRO(raw, scale) ((((raw) % (scale)) * MEGA) / scale)struct device;int bmi323_core_probe(struct device *dev);extern const struct regmap_config bmi323_regmap_config;extern const struct dev_pm_ops bmi323_core_pm_ops;#endif
Messung V0.5 C=96 H=96 G=95
¤ Dauer der Verarbeitung: 0.1 Sekunden
(vorverarbeitet)
¤ *© Formatika GbR, Deutschland
2026-04-07
