Quelle  conf.h   Sprache: C

/* SPDX-License-Identifier: GPL-2.0-only */
/*
 * This file is part of wl18xx
 *
 * Copyright (C) 2011 Texas Instruments Inc.
 */

#ifndef __WL18XX_CONF_H__
#define __WL18XX_CONF_H__

#define WL18XX_CONF_MAGIC 0x10e100ca
#define WL18XX_CONF_VERSION (WLCORE_CONF_VERSION | 0x0007)
#define WL18XX_CONF_MASK 0x0000ffff
#define WL18XX_CONF_SIZE (WLCORE_CONF_SIZE + \
     sizeof(struct wl18xx_priv_conf))

#define NUM_OF_CHANNELS_11_ABG 150
#define NUM_OF_CHANNELS_11_P 7
#define SRF_TABLE_LEN 16
#define PIN_MUXING_SIZE 2
#define WL18XX_TRACE_LOSS_GAPS_TX 10
#define WL18XX_TRACE_LOSS_GAPS_RX 18

struct wl18xx_mac_and_phy_params {
 u8 phy_standalone;
 u8 spare0;
 u8 enable_clpc;
 u8 enable_tx_low_pwr_on_siso_rdl;
 u8 auto_detect;
 u8 dedicated_fem;

 u8 low_band_component;

 /* Bit 0: One Hot, Bit 1: Control Enable, Bit 2: 1.8V, Bit 3: 3V */
 u8 low_band_component_type;

 u8 high_band_component;

 /* Bit 0: One Hot, Bit 1: Control Enable, Bit 2: 1.8V, Bit 3: 3V */
 u8 high_band_component_type;
 u8 number_of_assembled_ant2_4;
 u8 number_of_assembled_ant5;
 u8 pin_muxing_platform_options[PIN_MUXING_SIZE];
 u8 external_pa_dc2dc;
 u8 tcxo_ldo_voltage;
 u8 xtal_itrim_val;
 u8 srf_state;
 u8 srf1[SRF_TABLE_LEN];
 u8 srf2[SRF_TABLE_LEN];
 u8 srf3[SRF_TABLE_LEN];
 u8 io_configuration;
 u8 sdio_configuration;
 u8 settings;
 u8 rx_profile;
 u8 per_chan_pwr_limit_arr_11abg[NUM_OF_CHANNELS_11_ABG];
 u8 pwr_limit_reference_11_abg;
 u8 per_chan_pwr_limit_arr_11p[NUM_OF_CHANNELS_11_P];
 u8 pwr_limit_reference_11p;
 u8 spare1;
 u8 per_chan_bo_mode_11_abg[13];
 u8 per_chan_bo_mode_11_p[4];
 u8 primary_clock_setting_time;
 u8 clock_valid_on_wake_up;
 u8 secondary_clock_setting_time;
 u8 board_type;
 /* enable point saturation */
 u8 psat;
 /* low/medium/high Tx power in dBm for STA-HP BG */
 s8 low_power_val;
 s8 med_power_val;
 s8 high_power_val;
 s8 per_sub_band_tx_trace_loss[WL18XX_TRACE_LOSS_GAPS_TX];
 s8 per_sub_band_rx_trace_loss[WL18XX_TRACE_LOSS_GAPS_RX];
 u8 tx_rf_margin;
 /* low/medium/high Tx power in dBm for other role */
 s8 low_power_val_2nd;
 s8 med_power_val_2nd;
 s8 high_power_val_2nd;

 u8 padding[1];
} __packed;

enum wl18xx_ht_mode {
 /* Default - use MIMO, fallback to SISO20 */
 HT_MODE_DEFAULT = 0,

 /* Wide - use SISO40 */
 HT_MODE_WIDE = 1,

 /* Use SISO20 */
 HT_MODE_SISO20 = 2,
};

struct wl18xx_ht_settings {
 /* DEFAULT / WIDE / SISO20 */
 u8 mode;
} __packed;

struct conf_ap_sleep_settings {
 /* Duty Cycle (20-80% of staying Awake) for IDLE AP
 * (0: disable)
 */
 u8 idle_duty_cycle;
 /* Duty Cycle (20-80% of staying Awake) for Connected AP
 * (0: disable)
 */
 u8 connected_duty_cycle;
 /* Maximum stations that are allowed to be connected to AP
 *  (255: no limit)
 */
 u8 max_stations_thresh;
 /* Timeout till enabling the Sleep Mechanism after data stops
 * [unit: 100 msec]
 */
 u8 idle_conn_thresh;
} __packed;

struct wl18xx_priv_conf {
 /* Module params structures */
 struct wl18xx_ht_settings ht;

 /* this structure is copied wholesale to FW */
 struct wl18xx_mac_and_phy_params phy;

 struct conf_ap_sleep_settings ap_sleep;
} __packed;

enum wl18xx_sg_params {
 WL18XX_CONF_SG_PARAM_0 = 0,

 /* Configuration Parameters */
 WL18XX_CONF_SG_ANTENNA_CONFIGURATION,
 WL18XX_CONF_SG_ZIGBEE_COEX,
 WL18XX_CONF_SG_TIME_SYNC,

 WL18XX_CONF_SG_PARAM_4,
 WL18XX_CONF_SG_PARAM_5,
 WL18XX_CONF_SG_PARAM_6,
 WL18XX_CONF_SG_PARAM_7,
 WL18XX_CONF_SG_PARAM_8,
 WL18XX_CONF_SG_PARAM_9,
 WL18XX_CONF_SG_PARAM_10,
 WL18XX_CONF_SG_PARAM_11,
 WL18XX_CONF_SG_PARAM_12,
 WL18XX_CONF_SG_PARAM_13,
 WL18XX_CONF_SG_PARAM_14,
 WL18XX_CONF_SG_PARAM_15,
 WL18XX_CONF_SG_PARAM_16,
 WL18XX_CONF_SG_PARAM_17,
 WL18XX_CONF_SG_PARAM_18,
 WL18XX_CONF_SG_PARAM_19,
 WL18XX_CONF_SG_PARAM_20,
 WL18XX_CONF_SG_PARAM_21,
 WL18XX_CONF_SG_PARAM_22,
 WL18XX_CONF_SG_PARAM_23,
 WL18XX_CONF_SG_PARAM_24,
 WL18XX_CONF_SG_PARAM_25,

 /* Active Scan Parameters */
 WL18XX_CONF_SG_AUTO_SCAN_PROBE_REQ,
 WL18XX_CONF_SG_ACTIVE_SCAN_DURATION_FACTOR_HV3,

 WL18XX_CONF_SG_PARAM_28,

 /* Passive Scan Parameters */
 WL18XX_CONF_SG_PARAM_29,
 WL18XX_CONF_SG_PARAM_30,
 WL18XX_CONF_SG_PASSIVE_SCAN_DURATION_FACTOR_HV3,

 /* Passive Scan in Dual Antenna Parameters */
 WL18XX_CONF_SG_CONSECUTIVE_HV3_IN_PASSIVE_SCAN,
 WL18XX_CONF_SG_BEACON_HV3_COLL_TH_IN_PASSIVE_SCAN,
 WL18XX_CONF_SG_TX_RX_PROTECT_BW_IN_PASSIVE_SCAN,

 /* General Parameters */
 WL18XX_CONF_SG_STA_FORCE_PS_IN_BT_SCO,
 WL18XX_CONF_SG_PARAM_36,
 WL18XX_CONF_SG_BEACON_MISS_PERCENT,
 WL18XX_CONF_SG_PARAM_38,
 WL18XX_CONF_SG_RXT,
 WL18XX_CONF_SG_UNUSED,
 WL18XX_CONF_SG_ADAPTIVE_RXT_TXT,
 WL18XX_CONF_SG_GENERAL_USAGE_BIT_MAP,
 WL18XX_CONF_SG_HV3_MAX_SERVED,
 WL18XX_CONF_SG_PARAM_44,
 WL18XX_CONF_SG_PARAM_45,
 WL18XX_CONF_SG_CONSECUTIVE_CTS_THRESHOLD,
 WL18XX_CONF_SG_GEMINI_PARAM_47,
 WL18XX_CONF_SG_STA_CONNECTION_PROTECTION_TIME,

 /* AP Parameters */
 WL18XX_CONF_SG_AP_BEACON_MISS_TX,
 WL18XX_CONF_SG_PARAM_50,
 WL18XX_CONF_SG_AP_BEACON_WINDOW_INTERVAL,
 WL18XX_CONF_SG_AP_CONNECTION_PROTECTION_TIME,
 WL18XX_CONF_SG_PARAM_53,
 WL18XX_CONF_SG_PARAM_54,

 /* CTS Diluting Parameters */
 WL18XX_CONF_SG_CTS_DILUTED_BAD_RX_PACKETS_TH,
 WL18XX_CONF_SG_CTS_CHOP_IN_DUAL_ANT_SCO_MASTER,

 WL18XX_CONF_SG_TEMP_PARAM_1,
 WL18XX_CONF_SG_TEMP_PARAM_2,
 WL18XX_CONF_SG_TEMP_PARAM_3,
 WL18XX_CONF_SG_TEMP_PARAM_4,
 WL18XX_CONF_SG_TEMP_PARAM_5,
 WL18XX_CONF_SG_TEMP_PARAM_6,
 WL18XX_CONF_SG_TEMP_PARAM_7,
 WL18XX_CONF_SG_TEMP_PARAM_8,
 WL18XX_CONF_SG_TEMP_PARAM_9,
 WL18XX_CONF_SG_TEMP_PARAM_10,

 WL18XX_CONF_SG_PARAMS_MAX,
 WL18XX_CONF_SG_PARAMS_ALL = 0xff
};

#endif /* __WL18XX_CONF_H__ */