Anforderungen  |   Konzepte  |   Entwurf  |   Entwicklung  |   Qualitätssicherung  |   Lebenszyklus  |   Steuerung
 
 
 
 


Quelle  phy-spear1340-miphy.c   Sprache: C

 
// SPDX-License-Identifier: GPL-2.0-only
/*
 * ST spear1340-miphy driver
 *
 * Copyright (C) 2014 ST Microelectronics
 * Pratyush Anand <pratyush.anand@gmail.com>
 * Mohit Kumar <mohit.kumar.dhaka@gmail.com>
 */


#include <linux/bitops.h>
#include <linux/delay.h>
#include <linux/dma-mapping.h>
#include <linux/kernel.h>
#include <linux/mfd/syscon.h>
#include <linux/module.h>
#include <linux/of.h>
#include <linux/phy/phy.h>
#include <linux/platform_device.h>
#include <linux/regmap.h>

/* SPEAr1340 Registers */
/* Power Management Registers */
#define SPEAR1340_PCM_CFG   0x100
 #define SPEAR1340_PCM_CFG_SATA_POWER_EN  BIT(11)
#define SPEAR1340_PCM_WKUP_CFG   0x104
#define SPEAR1340_SWITCH_CTR   0x108

#define SPEAR1340_PERIP1_SW_RST   0x318
 #define SPEAR1340_PERIP1_SW_RSATA  BIT(12)
#define SPEAR1340_PERIP2_SW_RST   0x31C
#define SPEAR1340_PERIP3_SW_RST   0x320

/* PCIE - SATA configuration registers */
#define SPEAR1340_PCIE_SATA_CFG   0x424
 /* PCIE CFG MASks */
 #define SPEAR1340_PCIE_CFG_DEVICE_PRESENT BIT(11)
 #define SPEAR1340_PCIE_CFG_POWERUP_RESET BIT(10)
 #define SPEAR1340_PCIE_CFG_CORE_CLK_EN  BIT(9)
 #define SPEAR1340_PCIE_CFG_AUX_CLK_EN  BIT(8)
 #define SPEAR1340_SATA_CFG_TX_CLK_EN  BIT(4)
 #define SPEAR1340_SATA_CFG_RX_CLK_EN  BIT(3)
 #define SPEAR1340_SATA_CFG_POWERUP_RESET BIT(2)
 #define SPEAR1340_SATA_CFG_PM_CLK_EN  BIT(1)
 #define SPEAR1340_PCIE_SATA_SEL_PCIE  (0)
 #define SPEAR1340_PCIE_SATA_SEL_SATA  (1)
 #define SPEAR1340_PCIE_SATA_CFG_MASK  0xF1F
 #define SPEAR1340_PCIE_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_PCIE | \
   SPEAR1340_PCIE_CFG_AUX_CLK_EN | \
   SPEAR1340_PCIE_CFG_CORE_CLK_EN | \
   SPEAR1340_PCIE_CFG_POWERUP_RESET | \
   SPEAR1340_PCIE_CFG_DEVICE_PRESENT)
 #define SPEAR1340_SATA_CFG_VAL (SPEAR1340_PCIE_SATA_SEL_SATA | \
   SPEAR1340_SATA_CFG_PM_CLK_EN | \
   SPEAR1340_SATA_CFG_POWERUP_RESET | \
   SPEAR1340_SATA_CFG_RX_CLK_EN | \
   SPEAR1340_SATA_CFG_TX_CLK_EN)

#define SPEAR1340_PCIE_MIPHY_CFG  0x428
 #define SPEAR1340_MIPHY_OSC_BYPASS_EXT  BIT(31)
 #define SPEAR1340_MIPHY_CLK_REF_DIV2  BIT(27)
 #define SPEAR1340_MIPHY_CLK_REF_DIV4  (2 << 27)
 #define SPEAR1340_MIPHY_CLK_REF_DIV8  (3 << 27)
 #define SPEAR1340_MIPHY_PLL_RATIO_TOP(x) (x << 0)
 #define SPEAR1340_PCIE_MIPHY_CFG_MASK  0xF80000FF
 #define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA \
   (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
   SPEAR1340_MIPHY_CLK_REF_DIV2 | \
   SPEAR1340_MIPHY_PLL_RATIO_TOP(60))
 #define SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK \
   (SPEAR1340_MIPHY_PLL_RATIO_TOP(120))
 #define SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE \
   (SPEAR1340_MIPHY_OSC_BYPASS_EXT | \
   SPEAR1340_MIPHY_PLL_RATIO_TOP(25))

enum spear1340_miphy_mode {
 SATA,
 PCIE,
};

struct spear1340_miphy_priv {
 /* phy mode: 0 for SATA 1 for PCIe */
 enum spear1340_miphy_mode mode;
 /* regmap for any soc specific misc registers */
 struct regmap   *misc;
 /* phy struct pointer */
 struct phy   *phy;
};

static int spear1340_miphy_sata_init(struct spear1340_miphy_priv *priv)
{
 regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG,
      SPEAR1340_PCIE_SATA_CFG_MASK,
      SPEAR1340_SATA_CFG_VAL);
 regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG,
      SPEAR1340_PCIE_MIPHY_CFG_MASK,
      SPEAR1340_PCIE_SATA_MIPHY_CFG_SATA_25M_CRYSTAL_CLK);
 /* Switch on sata power domain */
 regmap_update_bits(priv->misc, SPEAR1340_PCM_CFG,
      SPEAR1340_PCM_CFG_SATA_POWER_EN,
      SPEAR1340_PCM_CFG_SATA_POWER_EN);
 /* Wait for SATA power domain on */
 msleep(20);

 /* Disable PCIE SATA Controller reset */
 regmap_update_bits(priv->misc, SPEAR1340_PERIP1_SW_RST,
      SPEAR1340_PERIP1_SW_RSATA, 0);
 /* Wait for SATA reset de-assert completion */
 msleep(20);

 return 0;
}

static int spear1340_miphy_sata_exit(struct spear1340_miphy_priv *priv)
{
 regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG,
      SPEAR1340_PCIE_SATA_CFG_MASK, 0);
 regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG,
      SPEAR1340_PCIE_MIPHY_CFG_MASK, 0);

 /* Enable PCIE SATA Controller reset */
 regmap_update_bits(priv->misc, SPEAR1340_PERIP1_SW_RST,
      SPEAR1340_PERIP1_SW_RSATA,
      SPEAR1340_PERIP1_SW_RSATA);
 /* Wait for SATA power domain off */
 msleep(20);
 /* Switch off sata power domain */
 regmap_update_bits(priv->misc, SPEAR1340_PCM_CFG,
      SPEAR1340_PCM_CFG_SATA_POWER_EN, 0);
 /* Wait for SATA reset assert completion */
 msleep(20);

 return 0;
}

static int spear1340_miphy_pcie_init(struct spear1340_miphy_priv *priv)
{
 regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG,
      SPEAR1340_PCIE_MIPHY_CFG_MASK,
      SPEAR1340_PCIE_SATA_MIPHY_CFG_PCIE);
 regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG,
      SPEAR1340_PCIE_SATA_CFG_MASK,
      SPEAR1340_PCIE_CFG_VAL);

 return 0;
}

static int spear1340_miphy_pcie_exit(struct spear1340_miphy_priv *priv)
{
 regmap_update_bits(priv->misc, SPEAR1340_PCIE_MIPHY_CFG,
      SPEAR1340_PCIE_MIPHY_CFG_MASK, 0);
 regmap_update_bits(priv->misc, SPEAR1340_PCIE_SATA_CFG,
      SPEAR1340_PCIE_SATA_CFG_MASK, 0);

 return 0;
}

static int spear1340_miphy_init(struct phy *phy)
{
 struct spear1340_miphy_priv *priv = phy_get_drvdata(phy);
 int ret = 0;

 if (priv->mode == SATA)
  ret = spear1340_miphy_sata_init(priv);
 else if (priv->mode == PCIE)
  ret = spear1340_miphy_pcie_init(priv);

 return ret;
}

static int spear1340_miphy_exit(struct phy *phy)
{
 struct spear1340_miphy_priv *priv = phy_get_drvdata(phy);
 int ret = 0;

 if (priv->mode == SATA)
  ret = spear1340_miphy_sata_exit(priv);
 else if (priv->mode == PCIE)
  ret = spear1340_miphy_pcie_exit(priv);

 return ret;
}

static const struct of_device_id spear1340_miphy_of_match[] = {
 { .compatible = "st,spear1340-miphy" },
 { },
};
MODULE_DEVICE_TABLE(of, spear1340_miphy_of_match);

static const struct phy_ops spear1340_miphy_ops = {
 .init = spear1340_miphy_init,
 .exit = spear1340_miphy_exit,
 .owner = THIS_MODULE,
};

#ifdef CONFIG_PM_SLEEP
static int spear1340_miphy_suspend(struct device *dev)
{
 struct spear1340_miphy_priv *priv = dev_get_drvdata(dev);
 int ret = 0;

 if (priv->mode == SATA)
  ret = spear1340_miphy_sata_exit(priv);

 return ret;
}

static int spear1340_miphy_resume(struct device *dev)
{
 struct spear1340_miphy_priv *priv = dev_get_drvdata(dev);
 int ret = 0;

 if (priv->mode == SATA)
  ret = spear1340_miphy_sata_init(priv);

 return ret;
}
#endif

static SIMPLE_DEV_PM_OPS(spear1340_miphy_pm_ops, spear1340_miphy_suspend,
    spear1340_miphy_resume);

static struct phy *spear1340_miphy_xlate(struct device *dev,
      const struct of_phandle_args *args)
{
 struct spear1340_miphy_priv *priv = dev_get_drvdata(dev);

 if (args->args_count < 1) {
  dev_err(dev, "DT did not pass correct no of args\n");
  return ERR_PTR(-ENODEV);
 }

 priv->mode = args->args[0];

 if (priv->mode != SATA && priv->mode != PCIE) {
  dev_err(dev, "DT did not pass correct phy mode\n");
  return ERR_PTR(-ENODEV);
 }

 return priv->phy;
}

static int spear1340_miphy_probe(struct platform_device *pdev)
{
 struct device *dev = &pdev->dev;
 struct spear1340_miphy_priv *priv;
 struct phy_provider *phy_provider;

 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
 if (!priv)
  return -ENOMEM;

 priv->misc =
  syscon_regmap_lookup_by_phandle(dev->of_node, "misc");
 if (IS_ERR(priv->misc)) {
  dev_err(dev, "failed to find misc regmap\n");
  return PTR_ERR(priv->misc);
 }

 priv->phy = devm_phy_create(dev, NULL, &spear1340_miphy_ops);
 if (IS_ERR(priv->phy)) {
  dev_err(dev, "failed to create SATA PCIe PHY\n");
  return PTR_ERR(priv->phy);
 }

 dev_set_drvdata(dev, priv);
 phy_set_drvdata(priv->phy, priv);

 phy_provider =
  devm_of_phy_provider_register(dev, spear1340_miphy_xlate);
 if (IS_ERR(phy_provider)) {
  dev_err(dev, "failed to register phy provider\n");
  return PTR_ERR(phy_provider);
 }

 return 0;
}

static struct platform_driver spear1340_miphy_driver = {
 .probe  = spear1340_miphy_probe,
 .driver = {
  .name = "spear1340-miphy",
  .pm = &spear1340_miphy_pm_ops,
  .of_match_table = spear1340_miphy_of_match,
 },
};

module_platform_driver(spear1340_miphy_driver);

MODULE_DESCRIPTION("ST SPEAR1340-MIPHY driver");
MODULE_AUTHOR("Pratyush Anand ");
MODULE_LICENSE("GPL v2");

Messung V0.5
C=78 H=98 G=88

¤ Dauer der Verarbeitung: 0.0 Sekunden  (vorverarbeitet)  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.






                                                                                                                                                                                                                                                                                                                                                                                                     


Neuigkeiten

     Aktuelles
     Motto des Tages

Software

     Produkte
     Quellcodebibliothek

Aktivitäten

     Artikel über Sicherheit
     Anleitung zur Aktivierung von SSL

Muße

     Gedichte
     Musik
     Bilder

Jenseits des Üblichen ....
    

Besucherstatistik

Besucherstatistik

Monitoring

Montastic status badge