Anforderungen  |   Konzepte  |   Entwurf  |   Entwicklung  |   Qualitätssicherung  |   Lebenszyklus  |   Steuerung
 
 
 
 


Quelle  extcon-adc-jack.h   Sprache: C

 
/* SPDX-License-Identifier: GPL-2.0-only */
/*
 * include/linux/extcon/extcon-adc-jack.h
 *
 * Analog Jack extcon driver with ADC-based detection capability.
 *
 * Copyright (C) 2012 Samsung Electronics
 * MyungJoo Ham <myungjoo.ham@samsung.com>
 */


#ifndef _EXTCON_ADC_JACK_H_
#define _EXTCON_ADC_JACK_H_ __FILE__

#include <linux/module.h>
#include <linux/extcon.h>

/**
 * struct adc_jack_cond - condition to use an extcon state
 * denotes the last adc_jack_cond element among the array)
 * @id: the unique id of each external connector
 * @min_adc: min adc value for this condition
 * @max_adc: max adc value for this condition
 *
 * For example, if { .state = 0x3, .min_adc = 100, .max_adc = 200}, it means
 * that if ADC value is between (inclusive) 100 and 200, than the cable 0 and
 * 1 are attached (1<<0 | 1<<1 == 0x3)
 *
 * Note that you don't need to describe condition for "no cable attached"
 * because when no adc_jack_cond is met, state = 0 is automatically chosen.
 */

struct adc_jack_cond {
 unsigned int id;
 u32 min_adc;
 u32 max_adc;
};

/**
 * struct adc_jack_pdata - platform data for adc jack device.
 * @name: name of the extcon device. If null, "adc-jack" is used.
 * @consumer_channel: Unique name to identify the channel on the consumer
 * side. This typically describes the channels used within
 * the consumer. E.g. 'battery_voltage'
 * @cable_names: array of extcon id for supported cables.
 * @adc_contitions: array of struct adc_jack_cond conditions ending
 * with .state = 0 entry. This describes how to decode
 * adc values into extcon state.
 * @irq_flags: irq flags used for the @irq
 * @handling_delay_ms: in some devices, we need to read ADC value some
 * milli-seconds after the interrupt occurs. You may
 * describe such delays with @handling_delay_ms, which
 * is rounded-off by jiffies.
 * @wakeup_source: flag to wake up the system for extcon events.
 */

struct adc_jack_pdata {
 const char *name;
 const char *consumer_channel;

 const unsigned int *cable_names;

 /* The last entry's state should be 0 */
 struct adc_jack_cond *adc_conditions;

 unsigned long irq_flags;
 unsigned long handling_delay_ms; /* in ms */
 bool wakeup_source;
};

#endif /* _EXTCON_ADC_JACK_H */

Messung V0.5
C=97 H=99 G=97

¤ Dauer der Verarbeitung: 0.12 Sekunden  (vorverarbeitet)  ¤

*© Formatika GbR, Deutschland






Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.

Bemerkung:

Die farbliche Syntaxdarstellung und die Messung sind noch experimentell.






                                                                                                                                                                                                                                                                                                                                                                                                     


Neuigkeiten

     Aktuelles
     Motto des Tages

Software

     Produkte
     Quellcodebibliothek

Aktivitäten

     Artikel über Sicherheit
     Anleitung zur Aktivierung von SSL

Muße

     Gedichte
     Musik
     Bilder

Jenseits des Üblichen ....
    

Besucherstatistik

Besucherstatistik

Monitoring

Montastic status badge