/* SPDX-License-Identifier: GPL-2.0 */ #ifndef __LINUX_ULPI_REGS_H#define __LINUX_ULPI_REGS_H/* * Macros for Set and Clear * See ULPI 1.1 specification to find the registers with Set and Clear offsets #define ULPI_SET(a) (a + 1)#define ULPI_CLR(a) (a + 2)/* * Register Map #define ULPI_VENDOR_ID_LOW 0x00#define ULPI_VENDOR_ID_HIGH 0x01#define ULPI_PRODUCT_ID_LOW 0x02#define ULPI_PRODUCT_ID_HIGH 0x03#define ULPI_FUNC_CTRL 0x04#define ULPI_IFC_CTRL 0x07#define ULPI_OTG_CTRL 0x0a#define ULPI_USB_INT_EN_RISE 0x0d#define ULPI_USB_INT_EN_FALL 0x10#define ULPI_USB_INT_STS 0x13#define ULPI_USB_INT_LATCH 0x14#define ULPI_DEBUG 0x15#define ULPI_SCRATCH 0x16/* Optional Carkit Registers */ #define ULPI_CARKIT_CTRL 0x19#define ULPI_CARKIT_INT_DELAY 0x1c#define ULPI_CARKIT_INT_EN 0x1d#define ULPI_CARKIT_INT_STS 0x20#define ULPI_CARKIT_INT_LATCH 0x21#define ULPI_CARKIT_PLS_CTRL 0x22/* Other Optional Registers */ #define ULPI_TX_POS_WIDTH 0x25#define ULPI_TX_NEG_WIDTH 0x26#define ULPI_POLARITY_RECOVERY 0x27/* Access Extended Register Set */ #define ULPI_ACCESS_EXTENDED 0x2f/* Vendor Specific */ #define ULPI_VENDOR_SPECIFIC 0x30/* Extended Registers */ #define ULPI_EXT_VENDOR_SPECIFIC 0x80/* * Register Bits /* Function Control */ #define ULPI_FUNC_CTRL_XCVRSEL BIT(0)#define ULPI_FUNC_CTRL_XCVRSEL_MASK 0x3#define ULPI_FUNC_CTRL_HIGH_SPEED 0x0#define ULPI_FUNC_CTRL_FULL_SPEED 0x1#define ULPI_FUNC_CTRL_LOW_SPEED 0x2#define ULPI_FUNC_CTRL_FS4LS 0x3#define ULPI_FUNC_CTRL_TERMSELECT BIT(2)#define ULPI_FUNC_CTRL_OPMODE BIT(3)#define ULPI_FUNC_CTRL_OPMODE_MASK (0x3 << 3)#define ULPI_FUNC_CTRL_OPMODE_NORMAL (0x0 << 3)#define ULPI_FUNC_CTRL_OPMODE_NONDRIVING (0x1 << 3)#define ULPI_FUNC_CTRL_OPMODE_DISABLE_NRZI (0x2 << 3)#define ULPI_FUNC_CTRL_OPMODE_NOSYNC_NOEOP (0x3 << 3)#define ULPI_FUNC_CTRL_RESET BIT(5)#define ULPI_FUNC_CTRL_SUSPENDM BIT(6)/* Interface Control */ #define ULPI_IFC_CTRL_6_PIN_SERIAL_MODE BIT(0)#define ULPI_IFC_CTRL_3_PIN_SERIAL_MODE BIT(1)#define ULPI_IFC_CTRL_CARKITMODE BIT(2)#define ULPI_IFC_CTRL_CLOCKSUSPENDM BIT(3)#define ULPI_IFC_CTRL_AUTORESUME BIT(4)#define ULPI_IFC_CTRL_EXTERNAL_VBUS BIT(5)#define ULPI_IFC_CTRL_PASSTHRU BIT(6)#define ULPI_IFC_CTRL_PROTECT_IFC_DISABLE BIT(7)/* OTG Control */ #define ULPI_OTG_CTRL_ID_PULLUP BIT(0)#define ULPI_OTG_CTRL_DP_PULLDOWN BIT(1)#define ULPI_OTG_CTRL_DM_PULLDOWN BIT(2)#define ULPI_OTG_CTRL_DISCHRGVBUS BIT(3)#define ULPI_OTG_CTRL_CHRGVBUS BIT(4)#define ULPI_OTG_CTRL_DRVVBUS BIT(5)#define ULPI_OTG_CTRL_DRVVBUS_EXT BIT(6)#define ULPI_OTG_CTRL_EXTVBUSIND BIT(7)/* USB Interrupt Enable Rising, * USB Interrupt Enable Falling, * USB Interrupt Status and * USB Interrupt Latch #define ULPI_INT_HOST_DISCONNECT BIT(0)#define ULPI_INT_VBUS_VALID BIT(1)#define ULPI_INT_SESS_VALID BIT(2)#define ULPI_INT_SESS_END BIT(3)#define ULPI_INT_IDGRD BIT(4)/* Debug */ #define ULPI_DEBUG_LINESTATE0 BIT(0)#define ULPI_DEBUG_LINESTATE1 BIT(1)/* Carkit Control */ #define ULPI_CARKIT_CTRL_CARKITPWR BIT(0)#define ULPI_CARKIT_CTRL_IDGNDDRV BIT(1)#define ULPI_CARKIT_CTRL_TXDEN BIT(2)#define ULPI_CARKIT_CTRL_RXDEN BIT(3)#define ULPI_CARKIT_CTRL_SPKLEFTEN BIT(4)#define ULPI_CARKIT_CTRL_SPKRIGHTEN BIT(5)#define ULPI_CARKIT_CTRL_MICEN BIT(6)/* Carkit Interrupt Enable */ #define ULPI_CARKIT_INT_EN_IDFLOAT_RISE BIT(0)#define ULPI_CARKIT_INT_EN_IDFLOAT_FALL BIT(1)#define ULPI_CARKIT_INT_EN_CARINTDET BIT(2)#define ULPI_CARKIT_INT_EN_DP_RISE BIT(3)#define ULPI_CARKIT_INT_EN_DP_FALL BIT(4)/* Carkit Interrupt Status and * Carkit Interrupt Latch #define ULPI_CARKIT_INT_IDFLOAT BIT(0)#define ULPI_CARKIT_INT_CARINTDET BIT(1)#define ULPI_CARKIT_INT_DP BIT(2)/* Carkit Pulse Control*/ #define ULPI_CARKIT_PLS_CTRL_TXPLSEN BIT(0)#define ULPI_CARKIT_PLS_CTRL_RXPLSEN BIT(1)#define ULPI_CARKIT_PLS_CTRL_SPKRLEFT_BIASEN BIT(2)#define ULPI_CARKIT_PLS_CTRL_SPKRRIGHT_BIASEN BIT(3)#endif /* __LINUX_ULPI_REGS_H */
Messung V0.5 C=90 H=99 G=94
¤ Dauer der Verarbeitung: 0.9 Sekunden
(vorverarbeitet)
¤ *© Formatika GbR, Deutschland
