/** * waitqueue_active -- locklessly test for waiters on the queue * @wq_head: the waitqueue to test for waiters * * returns true if the wait list is not empty * * NOTE: this function is lockless and requires care, incorrect usage _will_ * lead to sporadic and non-obvious failure. * * Use either while holding wait_queue_head::lock or when used for wakeups * with an extra smp_mb() like:: * * CPU0 - waker CPU1 - waiter * * for (;;) { * @cond = true; prepare_to_wait(&wq_head, &wait, state); * smp_mb(); // smp_mb() from set_current_state() * if (waitqueue_active(wq_head)) if (@cond) * wake_up(wq_head); break; * schedule(); * } * finish_wait(&wq_head, &wait); * * Because without the explicit smp_mb() it's possible for the * waitqueue_active() load to get hoisted over the @cond store such that we'll * observe an empty wait list while the waiter might not observe @cond. * * Also note that this 'optimization' trades a spin_lock() for an smp_mb(), * which (when the lock is uncontended) are of roughly equal cost.
*/ staticinlineint waitqueue_active(struct wait_queue_head *wq_head)
{ return !list_empty(&wq_head->head);
}
/** * wq_has_single_sleeper - check if there is only one sleeper * @wq_head: wait queue head * * Returns true of wq_head has only one sleeper on the list. * * Please refer to the comment for waitqueue_active.
*/ staticinlinebool wq_has_single_sleeper(struct wait_queue_head *wq_head)
{ return list_is_singular(&wq_head->head);
}
/** * wq_has_sleeper - check if there are any waiting processes * @wq_head: wait queue head * * Returns true if wq_head has waiting processes * * Please refer to the comment for waitqueue_active.
*/ staticinlinebool wq_has_sleeper(struct wait_queue_head *wq_head)
{ /* * We need to be sure we are in sync with the * add_wait_queue modifications to the wait queue. * * This memory barrier should be paired with one on the * waiting side.
*/
smp_mb(); return waitqueue_active(wq_head);
}
/* * Wakeup macros to be used to report events to the targets.
*/ #define poll_to_key(m) ((void *)(__force uintptr_t)(__poll_t)(m)) #define key_to_poll(m) ((__force __poll_t)(uintptr_t)(void *)(m)) #define wake_up_poll(x, m) \
__wake_up(x, TASK_NORMAL, 1, poll_to_key(m)) #define wake_up_poll_on_current_cpu(x, m) \
__wake_up_on_current_cpu(x, TASK_NORMAL, poll_to_key(m)) #define wake_up_locked_poll(x, m) \
__wake_up_locked_key((x), TASK_NORMAL, poll_to_key(m)) #define wake_up_interruptible_poll(x, m) \
__wake_up(x, TASK_INTERRUPTIBLE, 1, poll_to_key(m)) #define wake_up_interruptible_sync_poll(x, m) \
__wake_up_sync_key((x), TASK_INTERRUPTIBLE, poll_to_key(m)) #define wake_up_interruptible_sync_poll_locked(x, m) \
__wake_up_locked_sync_key((x), TASK_INTERRUPTIBLE, poll_to_key(m))
/** * wake_up_pollfree - signal that a polled waitqueue is going away * @wq_head: the wait queue head * * In the very rare cases where a ->poll() implementation uses a waitqueue whose * lifetime is tied to a task rather than to the 'struct file' being polled, * this function must be called before the waitqueue is freed so that * non-blocking polls (e.g. epoll) are notified that the queue is going away. * * The caller must also RCU-delay the freeing of the wait_queue_head, e.g. via * an explicit synchronize_rcu() or call_rcu(), or via SLAB_TYPESAFE_BY_RCU.
*/ staticinlinevoid wake_up_pollfree(struct wait_queue_head *wq_head)
{ /* * For performance reasons, we don't always take the queue lock here. * Therefore, we might race with someone removing the last entry from * the queue, and proceed while they still hold the queue lock. * However, rcu_read_lock() is required to be held in such cases, so we * can safely proceed with an RCU-delayed free.
*/ if (waitqueue_active(wq_head))
__wake_up_pollfree(wq_head);
}
externvoid init_wait_entry(struct wait_queue_entry *wq_entry, int flags);
/* * The below macro ___wait_event() has an explicit shadow of the __ret * variable when used from the wait_event_*() macros. * * This is so that both can use the ___wait_cond_timeout() construct * to wrap the condition. * * The type inconsistency of the wait_event_*() __ret variable is also * on purpose; we use long where we can return timeout values and int * otherwise.
*/
/** * wait_event - sleep until a condition gets true * @wq_head: the waitqueue to wait on * @condition: a C expression for the event to wait for * * The process is put to sleep (TASK_UNINTERRUPTIBLE) until the * @condition evaluates to true. The @condition is checked each time * the waitqueue @wq_head is woken up. * * wake_up() has to be called after changing any variable that could * change the result of the wait condition.
*/ #define wait_event(wq_head, condition) \ do { \
might_sleep(); \ if (condition) \ break; \
__wait_event(wq_head, condition); \
} while (0)
/* * io_wait_event() -- like wait_event() but with io_schedule()
*/ #define io_wait_event(wq_head, condition) \ do { \
might_sleep(); \ if (condition) \ break; \
__io_wait_event(wq_head, condition); \
} while (0)
/** * wait_event_freezable - sleep (or freeze) until a condition gets true * @wq_head: the waitqueue to wait on * @condition: a C expression for the event to wait for * * The process is put to sleep (TASK_INTERRUPTIBLE -- so as not to contribute * to system load) until the @condition evaluates to true. The * @condition is checked each time the waitqueue @wq_head is woken up. * * wake_up() has to be called after changing any variable that could * change the result of the wait condition.
*/ #define wait_event_freezable(wq_head, condition) \
({ \ int __ret = 0; \
might_sleep(); \ if (!(condition)) \
__ret = __wait_event_freezable(wq_head, condition); \
__ret; \
})
/** * wait_event_timeout - sleep until a condition gets true or a timeout elapses * @wq_head: the waitqueue to wait on * @condition: a C expression for the event to wait for * @timeout: timeout, in jiffies * * The process is put to sleep (TASK_UNINTERRUPTIBLE) until the * @condition evaluates to true. The @condition is checked each time * the waitqueue @wq_head is woken up. * * wake_up() has to be called after changing any variable that could * change the result of the wait condition. * * Returns: * 0 if the @condition evaluated to %false after the @timeout elapsed, * 1 if the @condition evaluated to %true after the @timeout elapsed, * or the remaining jiffies (at least 1) if the @condition evaluated * to %true before the @timeout elapsed.
*/ #define wait_event_timeout(wq_head, condition, timeout) \
({ \ long __ret = timeout; \
might_sleep(); \ if (!___wait_cond_timeout(condition)) \
__ret = __wait_event_timeout(wq_head, condition, timeout); \
__ret; \
})
/** * wait_event_cmd - sleep until a condition gets true * @wq_head: the waitqueue to wait on * @condition: a C expression for the event to wait for * @cmd1: the command will be executed before sleep * @cmd2: the command will be executed after sleep * * The process is put to sleep (TASK_UNINTERRUPTIBLE) until the * @condition evaluates to true. The @condition is checked each time * the waitqueue @wq_head is woken up. * * wake_up() has to be called after changing any variable that could * change the result of the wait condition.
*/ #define wait_event_cmd(wq_head, condition, cmd1, cmd2) \ do { \ if (condition) \ break; \
__wait_event_cmd(wq_head, condition, cmd1, cmd2); \
} while (0)
/** * wait_event_interruptible - sleep until a condition gets true * @wq_head: the waitqueue to wait on * @condition: a C expression for the event to wait for * * The process is put to sleep (TASK_INTERRUPTIBLE) until the * @condition evaluates to true or a signal is received. * The @condition is checked each time the waitqueue @wq_head is woken up. * * wake_up() has to be called after changing any variable that could * change the result of the wait condition. * * The function will return -ERESTARTSYS if it was interrupted by a * signal and 0 if @condition evaluated to true.
*/ #define wait_event_interruptible(wq_head, condition) \
({ \ int __ret = 0; \
might_sleep(); \ if (!(condition)) \
__ret = __wait_event_interruptible(wq_head, condition); \
__ret; \
})
/** * wait_event_interruptible_timeout - sleep until a condition gets true or a timeout elapses * @wq_head: the waitqueue to wait on * @condition: a C expression for the event to wait for * @timeout: timeout, in jiffies * * The process is put to sleep (TASK_INTERRUPTIBLE) until the * @condition evaluates to true or a signal is received. * The @condition is checked each time the waitqueue @wq_head is woken up. * * wake_up() has to be called after changing any variable that could * change the result of the wait condition. * * Returns: * 0 if the @condition evaluated to %false after the @timeout elapsed, * 1 if the @condition evaluated to %true after the @timeout elapsed, * the remaining jiffies (at least 1) if the @condition evaluated * to %true before the @timeout elapsed, or -%ERESTARTSYS if it was * interrupted by a signal.
*/ #define wait_event_interruptible_timeout(wq_head, condition, timeout) \
({ \ long __ret = timeout; \
might_sleep(); \ if (!___wait_cond_timeout(condition)) \
__ret = __wait_event_interruptible_timeout(wq_head, \
condition, timeout); \
__ret; \
})
/** * wait_event_hrtimeout - sleep until a condition gets true or a timeout elapses * @wq_head: the waitqueue to wait on * @condition: a C expression for the event to wait for * @timeout: timeout, as a ktime_t * * The process is put to sleep (TASK_UNINTERRUPTIBLE) until the * @condition evaluates to true or a signal is received. * The @condition is checked each time the waitqueue @wq_head is woken up. * * wake_up() has to be called after changing any variable that could * change the result of the wait condition. * * The function returns 0 if @condition became true, or -ETIME if the timeout * elapsed.
*/ #define wait_event_hrtimeout(wq_head, condition, timeout) \
({ \ int __ret = 0; \
might_sleep(); \ if (!(condition)) \
__ret = __wait_event_hrtimeout(wq_head, condition, timeout, \
TASK_UNINTERRUPTIBLE); \
__ret; \
})
/** * wait_event_interruptible_hrtimeout - sleep until a condition gets true or a timeout elapses * @wq: the waitqueue to wait on * @condition: a C expression for the event to wait for * @timeout: timeout, as a ktime_t * * The process is put to sleep (TASK_INTERRUPTIBLE) until the * @condition evaluates to true or a signal is received. * The @condition is checked each time the waitqueue @wq is woken up. * * wake_up() has to be called after changing any variable that could * change the result of the wait condition. * * The function returns 0 if @condition became true, -ERESTARTSYS if it was * interrupted by a signal, or -ETIME if the timeout elapsed.
*/ #define wait_event_interruptible_hrtimeout(wq, condition, timeout) \
({ \ long __ret = 0; \
might_sleep(); \ if (!(condition)) \
__ret = __wait_event_hrtimeout(wq, condition, timeout, \
TASK_INTERRUPTIBLE); \
__ret; \
})
/** * wait_event_idle - wait for a condition without contributing to system load * @wq_head: the waitqueue to wait on * @condition: a C expression for the event to wait for * * The process is put to sleep (TASK_IDLE) until the * @condition evaluates to true. * The @condition is checked each time the waitqueue @wq_head is woken up. * * wake_up() has to be called after changing any variable that could * change the result of the wait condition. *
*/ #define wait_event_idle(wq_head, condition) \ do { \
might_sleep(); \ if (!(condition)) \
___wait_event(wq_head, condition, TASK_IDLE, 0, 0, schedule()); \
} while (0)
/** * wait_event_idle_exclusive - wait for a condition with contributing to system load * @wq_head: the waitqueue to wait on * @condition: a C expression for the event to wait for * * The process is put to sleep (TASK_IDLE) until the * @condition evaluates to true. * The @condition is checked each time the waitqueue @wq_head is woken up. * * The process is put on the wait queue with an WQ_FLAG_EXCLUSIVE flag * set thus if other processes wait on the same list, when this * process is woken further processes are not considered. * * wake_up() has to be called after changing any variable that could * change the result of the wait condition. *
*/ #define wait_event_idle_exclusive(wq_head, condition) \ do { \
might_sleep(); \ if (!(condition)) \
___wait_event(wq_head, condition, TASK_IDLE, 1, 0, schedule()); \
} while (0)
/** * wait_event_idle_timeout - sleep without load until a condition becomes true or a timeout elapses * @wq_head: the waitqueue to wait on * @condition: a C expression for the event to wait for * @timeout: timeout, in jiffies * * The process is put to sleep (TASK_IDLE) until the * @condition evaluates to true. The @condition is checked each time * the waitqueue @wq_head is woken up. * * wake_up() has to be called after changing any variable that could * change the result of the wait condition. * * Returns: * 0 if the @condition evaluated to %false after the @timeout elapsed, * 1 if the @condition evaluated to %true after the @timeout elapsed, * or the remaining jiffies (at least 1) if the @condition evaluated * to %true before the @timeout elapsed.
*/ #define wait_event_idle_timeout(wq_head, condition, timeout) \
({ \ long __ret = timeout; \
might_sleep(); \ if (!___wait_cond_timeout(condition)) \
__ret = __wait_event_idle_timeout(wq_head, condition, timeout); \
__ret; \
})
/** * wait_event_idle_exclusive_timeout - sleep without load until a condition becomes true or a timeout elapses * @wq_head: the waitqueue to wait on * @condition: a C expression for the event to wait for * @timeout: timeout, in jiffies * * The process is put to sleep (TASK_IDLE) until the * @condition evaluates to true. The @condition is checked each time * the waitqueue @wq_head is woken up. * * The process is put on the wait queue with an WQ_FLAG_EXCLUSIVE flag * set thus if other processes wait on the same list, when this * process is woken further processes are not considered. * * wake_up() has to be called after changing any variable that could * change the result of the wait condition. * * Returns: * 0 if the @condition evaluated to %false after the @timeout elapsed, * 1 if the @condition evaluated to %true after the @timeout elapsed, * or the remaining jiffies (at least 1) if the @condition evaluated * to %true before the @timeout elapsed.
*/ #define wait_event_idle_exclusive_timeout(wq_head, condition, timeout) \
({ \ long __ret = timeout; \
might_sleep(); \ if (!___wait_cond_timeout(condition)) \
__ret = __wait_event_idle_exclusive_timeout(wq_head, condition, timeout);\
__ret; \
})
#define __wait_event_interruptible_locked(wq, condition, exclusive, fn) \
({ \ int __ret; \
DEFINE_WAIT(__wait); \ if (exclusive) \
__wait.flags |= WQ_FLAG_EXCLUSIVE; \ do { \
__ret = fn(&(wq), &__wait); \ if (__ret) \ break; \
} while (!(condition)); \
__remove_wait_queue(&(wq), &__wait); \
__set_current_state(TASK_RUNNING); \
__ret; \
})
/** * wait_event_interruptible_locked - sleep until a condition gets true * @wq: the waitqueue to wait on * @condition: a C expression for the event to wait for * * The process is put to sleep (TASK_INTERRUPTIBLE) until the * @condition evaluates to true or a signal is received. * The @condition is checked each time the waitqueue @wq is woken up. * * It must be called with wq.lock being held. This spinlock is * unlocked while sleeping but @condition testing is done while lock * is held and when this macro exits the lock is held. * * The lock is locked/unlocked using spin_lock()/spin_unlock() * functions which must match the way they are locked/unlocked outside * of this macro. * * wake_up_locked() has to be called after changing any variable that could * change the result of the wait condition. * * The function will return -ERESTARTSYS if it was interrupted by a * signal and 0 if @condition evaluated to true.
*/ #define wait_event_interruptible_locked(wq, condition) \
((condition) \
? 0 : __wait_event_interruptible_locked(wq, condition, 0, do_wait_intr))
/** * wait_event_interruptible_locked_irq - sleep until a condition gets true * @wq: the waitqueue to wait on * @condition: a C expression for the event to wait for * * The process is put to sleep (TASK_INTERRUPTIBLE) until the * @condition evaluates to true or a signal is received. * The @condition is checked each time the waitqueue @wq is woken up. * * It must be called with wq.lock being held. This spinlock is * unlocked while sleeping but @condition testing is done while lock * is held and when this macro exits the lock is held. * * The lock is locked/unlocked using spin_lock_irq()/spin_unlock_irq() * functions which must match the way they are locked/unlocked outside * of this macro. * * wake_up_locked() has to be called after changing any variable that could * change the result of the wait condition. * * The function will return -ERESTARTSYS if it was interrupted by a * signal and 0 if @condition evaluated to true.
*/ #define wait_event_interruptible_locked_irq(wq, condition) \
((condition) \
? 0 : __wait_event_interruptible_locked(wq, condition, 0, do_wait_intr_irq))
/** * wait_event_interruptible_exclusive_locked - sleep exclusively until a condition gets true * @wq: the waitqueue to wait on * @condition: a C expression for the event to wait for * * The process is put to sleep (TASK_INTERRUPTIBLE) until the * @condition evaluates to true or a signal is received. * The @condition is checked each time the waitqueue @wq is woken up. * * It must be called with wq.lock being held. This spinlock is * unlocked while sleeping but @condition testing is done while lock * is held and when this macro exits the lock is held. * * The lock is locked/unlocked using spin_lock()/spin_unlock() * functions which must match the way they are locked/unlocked outside * of this macro. * * The process is put on the wait queue with an WQ_FLAG_EXCLUSIVE flag * set thus when other process waits process on the list if this * process is awaken further processes are not considered. * * wake_up_locked() has to be called after changing any variable that could * change the result of the wait condition. * * The function will return -ERESTARTSYS if it was interrupted by a * signal and 0 if @condition evaluated to true.
*/ #define wait_event_interruptible_exclusive_locked(wq, condition) \
((condition) \
? 0 : __wait_event_interruptible_locked(wq, condition, 1, do_wait_intr))
/** * wait_event_interruptible_exclusive_locked_irq - sleep until a condition gets true * @wq: the waitqueue to wait on * @condition: a C expression for the event to wait for * * The process is put to sleep (TASK_INTERRUPTIBLE) until the * @condition evaluates to true or a signal is received. * The @condition is checked each time the waitqueue @wq is woken up. * * It must be called with wq.lock being held. This spinlock is * unlocked while sleeping but @condition testing is done while lock * is held and when this macro exits the lock is held. * * The lock is locked/unlocked using spin_lock_irq()/spin_unlock_irq() * functions which must match the way they are locked/unlocked outside * of this macro. * * The process is put on the wait queue with an WQ_FLAG_EXCLUSIVE flag * set thus when other process waits process on the list if this * process is awaken further processes are not considered. * * wake_up_locked() has to be called after changing any variable that could * change the result of the wait condition. * * The function will return -ERESTARTSYS if it was interrupted by a * signal and 0 if @condition evaluated to true.
*/ #define wait_event_interruptible_exclusive_locked_irq(wq, condition) \
((condition) \
? 0 : __wait_event_interruptible_locked(wq, condition, 1, do_wait_intr_irq))
/** * wait_event_killable - sleep until a condition gets true * @wq_head: the waitqueue to wait on * @condition: a C expression for the event to wait for * * The process is put to sleep (TASK_KILLABLE) until the * @condition evaluates to true or a signal is received. * The @condition is checked each time the waitqueue @wq_head is woken up. * * wake_up() has to be called after changing any variable that could * change the result of the wait condition. * * The function will return -ERESTARTSYS if it was interrupted by a * signal and 0 if @condition evaluated to true.
*/ #define wait_event_killable(wq_head, condition) \
({ \ int __ret = 0; \
might_sleep(); \ if (!(condition)) \
__ret = __wait_event_killable(wq_head, condition); \
__ret; \
})
/** * wait_event_state - sleep until a condition gets true * @wq_head: the waitqueue to wait on * @condition: a C expression for the event to wait for * @state: state to sleep in * * The process is put to sleep (@state) until the @condition evaluates to true * or a signal is received (when allowed by @state). The @condition is checked * each time the waitqueue @wq_head is woken up. * * wake_up() has to be called after changing any variable that could * change the result of the wait condition. * * The function will return -ERESTARTSYS if it was interrupted by a signal * (when allowed by @state) and 0 if @condition evaluated to true.
*/ #define wait_event_state(wq_head, condition, state) \
({ \ int __ret = 0; \
might_sleep(); \ if (!(condition)) \
__ret = __wait_event_state(wq_head, condition, state); \
__ret; \
})
/** * wait_event_killable_timeout - sleep until a condition gets true or a timeout elapses * @wq_head: the waitqueue to wait on * @condition: a C expression for the event to wait for * @timeout: timeout, in jiffies * * The process is put to sleep (TASK_KILLABLE) until the * @condition evaluates to true or a kill signal is received. * The @condition is checked each time the waitqueue @wq_head is woken up. * * wake_up() has to be called after changing any variable that could * change the result of the wait condition. * * Returns: * 0 if the @condition evaluated to %false after the @timeout elapsed, * 1 if the @condition evaluated to %true after the @timeout elapsed, * the remaining jiffies (at least 1) if the @condition evaluated * to %true before the @timeout elapsed, or -%ERESTARTSYS if it was * interrupted by a kill signal. * * Only kill signals interrupt this process.
*/ #define wait_event_killable_timeout(wq_head, condition, timeout) \
({ \ long __ret = timeout; \
might_sleep(); \ if (!___wait_cond_timeout(condition)) \
__ret = __wait_event_killable_timeout(wq_head, \
condition, timeout); \
__ret; \
})
/** * wait_event_lock_irq_cmd - sleep until a condition gets true. The * condition is checked under the lock. This * is expected to be called with the lock * taken. * @wq_head: the waitqueue to wait on * @condition: a C expression for the event to wait for * @lock: a locked spinlock_t, which will be released before cmd * and schedule() and reacquired afterwards. * @cmd: a command which is invoked outside the critical section before * sleep * * The process is put to sleep (TASK_UNINTERRUPTIBLE) until the * @condition evaluates to true. The @condition is checked each time * the waitqueue @wq_head is woken up. * * wake_up() has to be called after changing any variable that could * change the result of the wait condition. * * This is supposed to be called while holding the lock. The lock is * dropped before invoking the cmd and going to sleep and is reacquired * afterwards.
*/ #define wait_event_lock_irq_cmd(wq_head, condition, lock, cmd) \ do { \ if (condition) \ break; \
__wait_event_lock_irq(wq_head, condition, lock, cmd); \
} while (0)
/** * wait_event_lock_irq - sleep until a condition gets true. The * condition is checked under the lock. This * is expected to be called with the lock * taken. * @wq_head: the waitqueue to wait on * @condition: a C expression for the event to wait for * @lock: a locked spinlock_t, which will be released before schedule() * and reacquired afterwards. * * The process is put to sleep (TASK_UNINTERRUPTIBLE) until the * @condition evaluates to true. The @condition is checked each time * the waitqueue @wq_head is woken up. * * wake_up() has to be called after changing any variable that could * change the result of the wait condition. * * This is supposed to be called while holding the lock. The lock is * dropped before going to sleep and is reacquired afterwards.
*/ #define wait_event_lock_irq(wq_head, condition, lock) \ do { \ if (condition) \ break; \
__wait_event_lock_irq(wq_head, condition, lock, ); \
} while (0)
/** * wait_event_interruptible_lock_irq_cmd - sleep until a condition gets true. * The condition is checked under the lock. This is expected to * be called with the lock taken. * @wq_head: the waitqueue to wait on * @condition: a C expression for the event to wait for * @lock: a locked spinlock_t, which will be released before cmd and * schedule() and reacquired afterwards. * @cmd: a command which is invoked outside the critical section before * sleep * * The process is put to sleep (TASK_INTERRUPTIBLE) until the * @condition evaluates to true or a signal is received. The @condition is * checked each time the waitqueue @wq_head is woken up. * * wake_up() has to be called after changing any variable that could * change the result of the wait condition. * * This is supposed to be called while holding the lock. The lock is * dropped before invoking the cmd and going to sleep and is reacquired * afterwards. * * The macro will return -ERESTARTSYS if it was interrupted by a signal * and 0 if @condition evaluated to true.
*/ #define wait_event_interruptible_lock_irq_cmd(wq_head, condition, lock, cmd) \
({ \ int __ret = 0; \ if (!(condition)) \
__ret = __wait_event_interruptible_lock_irq(wq_head, \
condition, lock, cmd); \
__ret; \
})
/** * wait_event_interruptible_lock_irq - sleep until a condition gets true. * The condition is checked under the lock. This is expected * to be called with the lock taken. * @wq_head: the waitqueue to wait on * @condition: a C expression for the event to wait for * @lock: a locked spinlock_t, which will be released before schedule() * and reacquired afterwards. * * The process is put to sleep (TASK_INTERRUPTIBLE) until the * @condition evaluates to true or signal is received. The @condition is * checked each time the waitqueue @wq_head is woken up. * * wake_up() has to be called after changing any variable that could * change the result of the wait condition. * * This is supposed to be called while holding the lock. The lock is * dropped before going to sleep and is reacquired afterwards. * * The macro will return -ERESTARTSYS if it was interrupted by a signal * and 0 if @condition evaluated to true.
*/ #define wait_event_interruptible_lock_irq(wq_head, condition, lock) \
({ \ int __ret = 0; \ if (!(condition)) \
__ret = __wait_event_interruptible_lock_irq(wq_head, \
condition, lock,); \
__ret; \
})
/** * wait_event_interruptible_lock_irq_timeout - sleep until a condition gets * true or a timeout elapses. The condition is checked under * the lock. This is expected to be called with the lock taken. * @wq_head: the waitqueue to wait on * @condition: a C expression for the event to wait for * @lock: a locked spinlock_t, which will be released before schedule() * and reacquired afterwards. * @timeout: timeout, in jiffies * * The process is put to sleep (TASK_INTERRUPTIBLE) until the * @condition evaluates to true or signal is received. The @condition is * checked each time the waitqueue @wq_head is woken up. * * wake_up() has to be called after changing any variable that could * change the result of the wait condition. * * This is supposed to be called while holding the lock. The lock is * dropped before going to sleep and is reacquired afterwards. * * The function returns 0 if the @timeout elapsed, -ERESTARTSYS if it * was interrupted by a signal, and the remaining jiffies otherwise * if the condition evaluated to true before the timeout elapsed.
*/ #define wait_event_interruptible_lock_irq_timeout(wq_head, condition, lock, \
timeout) \
({ \ long __ret = timeout; \ if (!___wait_cond_timeout(condition)) \
__ret = __wait_event_lock_irq_timeout( \
wq_head, condition, lock, timeout, \
TASK_INTERRUPTIBLE); \
__ret; \
})
/* * Waitqueues which are removed from the waitqueue_head at wakeup time
*/ void prepare_to_wait(struct wait_queue_head *wq_head, struct wait_queue_entry *wq_entry, int state); bool prepare_to_wait_exclusive(struct wait_queue_head *wq_head, struct wait_queue_entry *wq_entry, int state); long prepare_to_wait_event(struct wait_queue_head *wq_head, struct wait_queue_entry *wq_entry, int state); void finish_wait(struct wait_queue_head *wq_head, struct wait_queue_entry *wq_entry); long wait_woken(struct wait_queue_entry *wq_entry, unsigned mode, long timeout); int woken_wake_function(struct wait_queue_entry *wq_entry, unsigned mode, int sync, void*key); int autoremove_wake_function(struct wait_queue_entry *wq_entry, unsigned mode, int sync, void *key);
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
