Ziele Untersuchung
mit Columbo Integrität von
Datenbanken Interaktion und
Portierbarkeit Ergonomie der
Schnittstellen

Angebot Produkte Projekt Beratung

Mittel Analytik Modellierung Sprachen Algebra Logik Hardware Denken Kreativität

Zusammenhänge Gesellschaft Wirtschaft Branche Firma


products/sources/formale Sprachen/Cobol/Test-Suite/SQL M/ Datei vom 4.1.2008 mit Größe 17 kB

Quellcode-Bibliothek xts700.cob Sprache: Cobol

       IDENTIFICATION DIVISION.
       PROGRAM-ID.  XTS700.
       ENVIRONMENT DIVISION.
       CONFIGURATION SECTION.
       SOURCE-COMPUTER.  xyz.
       OBJECT-COMPUTER.  xyz.
       DATA DIVISION.
       WORKING-STORAGE SECTION.

      * Standard COBOL (file "XTS700.SCO") calling SQL
      * procedures in file "XTS700.MCO".
      *Copyright 1995 National Computing Centre Limited
      *and Computer Logic R&D S.A
      *on behalf of the CTS5 SQL2 Project.
      *All rights reserved.
      *The CTS5 SQL2 Project is sponsored by the European Community.
      *
      *The National Computing Centre Limited and Computer Logic R&D
      *have given permission to NIST to distribute this program
      *over the World Wide Web in order to promote SQL standards.
      *DISCLAIMER:
      *This program was reviewed by employees of NIST for
      *conformance to the SQL standards.
      *NIST assumes no responsibility for any party's use of
      *this program.

      ****************************************************************
      *
      *                 COMMENT SECTION
      *
      * SQL VALIDATION TEST SUITE V6.0
      *
      * XTS700.MCO  TEST7001
      * WRITTEN BY: Nickos Backalidis
      * TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
      *
      * This routine tests NULLIF which produces null
      *
      *REFERENCES
      *6.9 FT.2 <case abbreviation>
      *6.9 SR.1
      *6.9 GR.1a
      *6.9 GR.2a
      *6.9 LR.2a -- Raised. Entry SQL restriction which prohibited
      *             the use of a <case expression>
      *F#26 --   CASE expression
      *
      * Cleanups and fixes by V. Kogakis 08/12/95
      *
      * Cleanups and bug fixes by DWF 11/13/95:
      *   Fixed incorrect pass criteria
      *   Reformat to be consistent with NIST tests
      *   Change int flag back to long flag
      *   Removed repeated initialization of status codes
      *   Cleaned up inserts
      *   Removed extraneous transactions, used single rollback
      *   Add ROLLBACK after AUTHID (V5 global change)
      *   Fixed character string initializations
      *   Fixed incorrect EMPNUM refs where should be PNUM
      *   Fixed syntax errors
      *   Fixed blank padding on character strings
      *   Added missing SQLCODE check.
      *
      * QA STATUS : QA CHECK
      *
      * Fixed up again 1/18/96 DWF
      ****************************************************************

      * EXEC SQL BEGIN DECLARE SECTION END-EXEC
       01  SQLCODE PIC S9(9) COMP.
       01  SQLSTATE PIC  X(5).
       01  uid PIC  X(18).
       01  uidx PIC  X(18).
       01  sal PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  ehours PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  ename PIC  X(20).
       01  ecity PIC  X(15).
       01  epnum PIC  X(3).
       01  nlres PIC  X(15).
       01  cnif PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  indic1 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
       01  indic2 PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
      *  EXEC SQL END DECLARE SECTION END-EXEC
       01  norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  ALPNUM-TABLE VALUE IS
               "01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
           05  ALPNUM PIC X OCCURS 36 TIMES.
       01  NORMSQ.
           05  NORMSQX PIC X OCCURS 5 TIMES.
       01  errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
      *date_time declaration
       01  TO-DAY PIC 9(6).
       01  THE-TIME PIC 9(8).
       01  flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       01  SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       PROCEDURE DIVISION.
       P0.

             MOVE "CTS1 " TO uid
             CALL "AUTHID" USING uid
             MOVE "not logged in, not" TO uidx
      *  EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO;
             CALL "SUB1" USING SQLCODE SQLSTATE uidx
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB2" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
             if (uid  NOT  =   uidx) then
               DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
      -    " connected"
            STOP RUN
             END-IF
             MOVE 0 TO errcnt

             DISPLAY "SQL Test Suite, V6.0, Module COBOL, xts700.sco"
             DISPLAY
           "59-byte ID"
             DISPLAY "TEd Version # "
      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

      ******************** BEGIN TEST7001 *******************
             MOVE 1 TO flag
             DISPLAY " TEST7001"
             DISPLAY " NULLIF producing NULL"
             DISPLAY " References:"
             DISPLAY " 6.9 FT.2 -- "
             DISPLAY " 6.9 SR.1"
             DISPLAY " 6.9 GR.1a"
             DISPLAY " 6.9 GR.2a"
             DISPLAY " 6.9 LR.2a -- Raised Entry SQL restriction
      -    " which prohibited"
             DISPLAY " the use of a "
             DISPLAY " F#26 -- CASE expression"
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

      *Initialise error reporting variables
             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

      *printf("DELETE FROM STAFFB;\n\n");
      *EXEC SQL DELETE FROM STAFFB;

      *insert 6 rows in the table STAFFb in order to test NULLIF
             DISPLAY "INSERT INTO STAFFb
      -    " VALUES(10000,'Kilroy',10000,'P4','Athens','M');"
      *  EXEC SQL INSERT INTO STAFFb
      *  VALUES(10000,'Kilroy',10000,'P4','Athens','M');
             CALL "SUB3" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "INSERT INTO STAFFb
      -    " VALUES(15000,'Nickos',20000,'P6','Nickos','M');"
      *  EXEC SQL INSERT INTO STAFFb
      *  VALUES(15000,'Nickos',20000,'P6','Nickos','M');
             CALL "SUB4" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "INSERT INTO STAFFb
      -    " VALUES(NULL,'Nickos',NULL,'P5','Rhodes','M');"
      *  EXEC SQL INSERT INTO STAFFb
      *  VALUES(NULL,'Nickos',NULL,'P5','Rhodes','M');
             CALL "SUB5" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "INSERT INTO STAFFb
      -    " VALUES(10010,'George',NULL,'P7','Georgia','M');"
      *  EXEC SQL INSERT INTO STAFFb
      *  VALUES(10010,'George',NULL,'P7','Georgia','M');
             CALL "SUB6" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "INSERT INTO STAFFb
      -    " VALUES(10005,NULL,30000,'P8',NULL,'M');"
      *  EXEC SQL INSERT INTO STAFFb
      *  VALUES(10005,NULL,30000,'P8',NULL,'M');
             CALL "SUB7" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "INSERT INTO STAFFb
      -    " VALUES(10001,'Gregory',12000,'P9',NULL,'M');"
      *  EXEC SQL INSERT INTO STAFFb
      *  VALUES(10001,'Gregory',12000,'P9',NULL,'M');
             CALL "SUB8" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *initialise host variables
             MOVE 0 TO sal
             MOVE 0 TO ehours
             MOVE "xxxxxxxxxxxxxxxxxxxx" TO ename
             MOVE "xxxxxxxxxxxxxxx" TO ecity

      *Test NULLIF with numeric data types
             DISPLAY "* NULLIF producing NULL with numeric data types *"
             DISPLAY "DECLARE ALPHA CURSOR FOR SELECT
      -    " SALARY,EMPNAME,HOURS,CITY"
             DISPLAY "FROM CTS1.STAFFb"
             DISPLAY "WHERE NULLIF(SALARY,HOURS) IS NULL"
             DISPLAY "ORDER BY EMPNAME;"
      *  EXEC SQL DECLARE ALPHA CURSOR FOR SELECT SALARY, EMPNAME,
      *  HOURS, CITY
      *    FROM CTS1.STAFFb
      *    WHERE NULLIF(SALARY,HOURS) IS NULL
      *    ORDER BY EMPNAME END-EXEC

             DISPLAY "OPEN ALPHA;"
      *  EXEC SQL OPEN ALPHA;
             CALL "SUB9" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *two rows satisfy the <search condition> of the query

             DISPLAY "FETCH ALPHA INTO :sal, :ename, :ehours, :ecity;"
      *  EXEC SQL FETCH ALPHA INTO :sal, :ename, :ehours, :ecity
      * ;
             CALL "SUB10" USING SQLCODE SQLSTATE sal ename ehours ecity
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "Salary should be 10000 it is ", sal
             DISPLAY "Empname should be 'Kilroy ' it is '",
             ename, "'"
             DISPLAY "Hours should be 10000 it is ", ehours
             DISPLAY "City should be 'Athens ' it is '",
             ecity, "'"

             if (ename  NOT  =   "Kilroy ") then
               MOVE 0 TO flag
             END-IF
             if (ecity  NOT  =   "Athens ") then
               MOVE 0 TO flag
             END-IF
             if (ehours  NOT =  10000  OR  sal  NOT =  10000) then
               MOVE 0 TO flag
             END-IF

      *fetch second row

      *initialise host variables
             MOVE 0 TO sal
             MOVE 0 TO ehours
             MOVE "xxxxxxxxxxxxxxxxxxxx" TO ename
             MOVE "xxxxxxxxxxxxxxx" TO ecity
             MOVE 99 TO indic1
             MOVE 99 TO indic2

             DISPLAY "FETCH ALPHA INTO :sal:indic1
      -    " ,:ename,:ehours:indic2,:ecity"
      *  EXEC SQL FETCH ALPHA INTO
      *  :sal:indic1,:ename,:ehours:indic2,:ecity;
             CALL "SUB11" USING SQLCODE SQLSTATE sal indic1 ename ehours
             indic2 ecity
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "indic1 should be -1; its value is ", indic1
             DISPLAY "indic2 should be -1; its value is ", indic2
             DISPLAY "Ename should be 'Nickos '; its
      -    " value is '", ename, "'"
             DISPLAY "City should be 'Rhodes '; its value is
      -    " '", ecity, "'"

             if (ename  NOT  =   "Nickos ") then
               MOVE 0 TO flag
             END-IF
             if (ecity  NOT  =   "Rhodes ") then
               MOVE 0 TO flag
             END-IF
             if (indic1  NOT =  -1  OR  indic2  NOT =  -1) then
               MOVE 0 TO flag
             END-IF

      *end fetches

      *check that no more rows were retrieved which ** fail
      *check that a condition of no data is raised

             DISPLAY "FETCH ALPHA INTO :sal, :ename, :ehours, :ecity;"
      *  EXEC SQL FETCH ALPHA INTO :sal, :ename, :ehours, :ecity
      * ;
             CALL "SUB12" USING SQLCODE SQLSTATE sal ename ehours ecity
             MOVE SQLCODE TO SQL-COD
             DISPLAY "SQLCODE should be 100; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 02000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE  NOT =  100  OR  NORMSQ  NOT  =   "02000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "02000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "

             DISPLAY "CLOSE ALPHA;"
      *  EXEC SQL CLOSE ALPHA;
             CALL "SUB13" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      ***** test NULLIF with character string values ****
      *using NULLIF in the <select list>

             DISPLAY "* NULLIF producing NULL with character string
      -    " values *"
             DISPLAY "DECLARE BETA CURSOR FOR SELECT SALARY,PNUM,HOURS"
             DISPLAY ",NULLIF(EMPNAME,CITY)"
             DISPLAY "FROM CTS1.STAFFb"
             DISPLAY "WHERE EMPNAME = CITY OR EMPNAME IS NULL"
             DISPLAY "ORDER BY PNUM;"
      *  EXEC SQL DECLARE BETA CURSOR FOR SELECT
      *  SALARY,PNUM,HOURS,NULLIF(EMPNAME,CITY)
      *    FROM CTS1.STAFFb
      *    WHERE EMPNAME = CITY OR EMPNAME IS NULL
      *    ORDER BY PNUM END-EXEC

             DISPLAY "OPEN BETA;"
      *  EXEC SQL OPEN BETA;
             CALL "SUB14" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *initialise host variables
             MOVE 0 TO sal
             MOVE 0 TO ehours
             MOVE "xxx" TO epnum
             MOVE 99 TO indic1

      *two rows satisfy the <search condition> of the query
             DISPLAY "FETCH BETA INTO
      -    " :sal,:epnum,:ehours,:nlres:indic1;"
      *  EXEC SQL FETCH BETA INTO :sal,:epnum,:ehours,:nlres:indic1
      * ;
             CALL "SUB15" USING SQLCODE SQLSTATE sal epnum ehours nlres
             indic1
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "SALARY should be 15000; its value is ", sal
             DISPLAY "PNUM should be 'P6 '; its value is '", epnum,
             "'"
             DISPLAY "HOURS should be 20000; its value is ", ehours
             DISPLAY "indic1 should be -1; its value is ", indic1
             if (sal  NOT =  15000  OR  epnum  NOT  =   "P6 "  OR
             ehours  NOT =  20000) then
               MOVE 0 TO flag
             END-IF
             if (indic1  NOT =  -1) then
               MOVE 0 TO flag
             END-IF

      *initialise host variables
             MOVE 0 TO sal
             MOVE 0 TO ehours
             MOVE "xxxxxxxxxxxxxxx" TO nlres
             MOVE "xxx" TO epnum
             MOVE 99 TO indic1

      *second row
             DISPLAY "FETCH BETA INTO
      -    " :sal,:epnum,:ehours,:nlres:indic1;"
      *  EXEC SQL FETCH BETA INTO :sal,:epnum,:ehours,:nlres:indic1
      * ;
             CALL "SUB16" USING SQLCODE SQLSTATE sal epnum ehours nlres
             indic1
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "SALARY should be 10005; its value is ", sal
             DISPLAY "PNUM should be 'P8 '; its value is '", epnum,
             "'"
             DISPLAY "HOURS should be 30000; its value is ", ehours
             DISPLAY "indic1 should be -1; its value is ", indic1
             if (sal  NOT =  10005  OR  epnum  NOT  =   "P8 "  OR
             ehours  NOT =  30000) then
               MOVE 0 TO flag
             END-IF
             if (indic1  NOT =  -1) then
               MOVE 0 TO flag
             END-IF

      *fetch one more row and check that a condition of no
      *data is raised
             DISPLAY "FETCH BETA INTO
      -    " :sal,:epnum,:ehours,:nlres:indic1;"
      *  EXEC SQL FETCH BETA INTO :sal,:epnum,:ehours,:nlres:indic1
      * ;
             CALL "SUB17" USING SQLCODE SQLSTATE sal epnum ehours nlres
             indic1
             MOVE SQLCODE TO SQL-COD
             DISPLAY "SQLCODE should be 100; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 02000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE  NOT =  100  OR  NORMSQ  NOT  =   "02000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "02000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "

             DISPLAY "CLOSE BETA;"
      *  EXEC SQL CLOSE BETA;
             CALL "SUB18" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *Test NULLIF as an operand of NULLIF

             MOVE 0 TO cnif

             DISPLAY "* NULLIF as operand of NULLIF
      -    " *"
             DISPLAY "SELECT SUM(NULLIF(NULLIF(SALARY,10000),20000))"
             DISPLAY "INTO :cnif FROM STAFFb;"
      *cnif = sum of the salaries of all the departments
      *excluding the ones of 10000, 20000 and NULL
      *  EXEC SQL SELECT SUM(NULLIF(NULLIF(SALARY,10000),20000))
      *    INTO :cnif FROM STAFFb;
             CALL "SUB19" USING SQLCODE SQLSTATE cnif
             MOVE SQLCODE TO SQL-COD
      *SQLSTATE should be 01003
             DISPLAY "SQLSTATE should be 01003; its value is ", SQLSTATE
             if (SQLSTATE  NOT  =   "01003") then
               MOVE 0 TO flag
             END-IF
             DISPLAY "Cnif should be 195016 its value is ", cnif
             if (cnif  NOT =  195016) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "ROLLBACK WORK;"
      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB20" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *now record results

             if ( flag  =  1 ) then
               DISPLAY " xts700.mco *** pass *** "
      *    EXEC SQL INSERT INTO CTS1.TESTREPORT
      *      VALUES('7001','pass','MCO');
               CALL "SUB21" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " xts700.mco *** fail *** "
      *    EXEC SQL INSERT INTO CTS1.TESTREPORT
      *      VALUES('7001','fail','MCO');
               CALL "SUB22" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "========================================"

      *  EXEC SQL COMMIT WORK;
             CALL "SUB23" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST7001 ********************

      **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0

             STOP RUN.

      *    ****  Procedures for PERFORM statements

      *Test SQLCODE and SQLSTATE for normal completion.
       CHCKOK.
             DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
             PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE NOT =  0  OR   NORMSQ NOT = "00000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ = "00000"  AND  NORMSQ NOT = SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             .

       NOSUBCLASS.

      *This routine replaces valid implementation-defined
      *subclasses with 000.  This replacement equates valid
      *implementation-defined subclasses with the 000 value
      *expected by the test case; otherwise the test will fail.
      *After calling NOSUBCLASS, NORMSQ will be tested
      *                          SQLSTATE will be printed.

           MOVE SQLSTATE TO NORMSQ

           MOVE 3 TO norm1
      *subclass begins in position 3 of char array NORMSQ
      *valid subclass begins with 5-9, I-Z, end of ALPNUM table
           PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *Quit if NORMSQ is unchanged.  Subclass is not impl.-def.
      *Changed NORMSQ means implementation-defined subclass,
      *so proceed to zero it out, if valid (0-9,A-Z)
           if (NORMSQ   =   SQLSTATE) then
             GO TO EXIT-NOSUBCLASS
           END-IF

           MOVE 4 TO norm1
      *examining position 4 of char array NORMSQ
      *valid characters are 0-9, A-Z
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

           MOVE 5 TO norm1
      *valid characters are 0-9, A-Z
      *examining position 5 of char array NORMSQ
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *implementation-defined subclasses are allowed for warnings
      *(class = 01).  These equate to successful completion
      *SQLSTATE values of 00000.
      *Reference SQL-92 4.28 SQL-transactions, paragraph 2

           if (NORMSQX(1)  =  "0"  AND  NORMSQX(2)  =  "1") then
             MOVE "0" TO NORMSQX(2)
           END-IF
           .

       EXIT-NOSUBCLASS.
           EXIT.

quality99%

¤ Dauer der Verarbeitung: 0.18 Sekunden (vorverarbeitet) ¤

Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.