Ziele Untersuchung
mit Columbo Integrität von
Datenbanken Interaktion und
Portierbarkeit Ergonomie der
Schnittstellen

Angebot Produkte Projekt Beratung

Mittel Analytik Modellierung Sprachen Algebra Logik Hardware Denken Kreativität

Zusammenhänge Gesellschaft Wirtschaft Branche Firma


products/sources/formale Sprachen/Cobol/Test-Suite/SQL M/ Datei vom 4.1.2008 mit Größe 15 kB

Quelle cdr020.cob Sprache: Cobol

       IDENTIFICATION DIVISION.
       PROGRAM-ID.  CDR020.
       ENVIRONMENT DIVISION.
       CONFIGURATION SECTION.
       SOURCE-COMPUTER.  xyz.
       OBJECT-COMPUTER.  xyz.
       DATA DIVISION.
       WORKING-STORAGE SECTION.

      * Standard COBOL (file "CDR020.SCO") calling SQL
      * procedures in file "CDR020.MCO"

      ****************************************************************
      *
      *                 COMMENT SECTION
      *
      * DATE 1989/04/07 STANDARD COBOL LANGUAGE
      * NIST SQL VALIDATION TEST SUITE V6.0
      *  DISCLAIMER:
      *  This program was written by employees of NIST to test SQL
      *  implementations for conformance to the SQL standards.
      *  NIST assumes no responsibility for any party's use of
      *  this program.
      *
      * CDR020.SCO
      * WRITTEN BY: SUN DAJUN
      * TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
      *
      *   THIS ROUTINE TESTS THE REFERENTIAL INTEGRITY CONSTRAINT FOR
      * SQL.
      *
      * REFERENCES
      *       AMERICAN NATIONAL STANDARD database language - SQL
      *                          with Integrity Enhancement
      *
      *            SECTION 6.7 <referential constraint definition>
      *               <referential constraint definition>::=
      *                     FOREIGN KEY (<referencing columns>)
      *                     <references specification>
      *               <references specification>::=
      *                     REFERENCES <referenced table and columns>
      *               <referencing columns>::=
      *                       <reference column list>
      *               <refereced table and columns>::=
      *                       <table name>((<reference column list>
      *               <reference column list>::=
      *                       <column name>({,<column name>}...)
      *
      ****************************************************************

      * EXEC SQL BEGIN DECLARE SECTION END-EXEC
       01  max1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  max2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  min2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  min1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  count1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  SQLCODE PIC S9(9) COMP.
       01  errcnt PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
      * EXEC SQL END DECLARE SECTION END-EXEC

       01  code1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  uid PIC  X(18).
       01  uidx PIC X(18).

       01  SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

      * date_time declaration *
       01  TO-DAY PIC 9(6).
       01  THE-TIME PIC 9(8).

       PROCEDURE DIVISION.
       P0.

           MOVE "SUN" TO uid
           CALL "AUTHID" USING uid
           MOVE "not logged in, not" TO uidx
           CALL "AUTHCK" USING SQLCODE uidx
           MOVE SQLCODE TO SQL-COD
           if (uid NOT = uidx) then
            DISPLAY "ERROR: User " uid " expected."
            DISPLAY "User " uidx " connected."
            DISPLAY " "
            STOP RUN
           END-IF

           MOVE 0 TO errcnt
           DISPLAY
           "SQL Test Suite, V6.0, Module COBOL, cdr020.sco"
           DISPLAY " "
           DISPLAY
           "59-byte ID"
           DISPLAY "TEd Version #"
           DISPLAY " "
      * date_time print *
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
      ******************** BEGIN TEST0369 *******************
      * This test try to update PRIMARY KEY TABLE, only
      * temporary conflict
           DISPLAY " TEST0369 "
           DISPLAY " TEMPORARY CONFLICT "
           DISPLAY " SQL with Integrity Enhancement section
      -    " 6.3,6.4"
           DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
           DISPLAY  " "
           DISPLAY " INSERT INTO SIZ3_P3"
           DISPLAY " VALUES (0,'CC');"
           DISPLAY  " "
           DISPLAY " UPDATE SIZ3_P3"
           DISPLAY " SET F1 = F1 + 1;"
           DISPLAY  " "
           DISPLAY " SELECT MAX(F1),MIN(F1) INTO :min1,:max1 "
           DISPLAY "FROM SIZ3_P3;"
           DISPLAY  " "
      * EXEC SQL INSERT INTO SIZ3_P3
      *  VALUES (0,'CC') END-EXEC
           CALL "SUB1" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
      * EXEC SQL UPDATE SIZ3_P3
      *  SET F1 = F1 + 1 END-EXEC
           CALL "SUB2" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
           MOVE SQLCODE TO code1
      * EXEC SQL SELECT MAX(F1),MIN(F1) INTO :max1,:min1 FROM SIZ3_P3
      *  END-EXEC
           CALL "SUB3" USING SQLCODE max1 min1
           MOVE SQLCODE TO SQL-COD
      * EXEC SQL ROLLBACK WORK;
           CALL "SUB4" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
           DISPLAY " The correct answer is :"
           DISPLAY " code1 is equal to 0."
           DISPLAY " max1 = 5, min1 = 1."
           DISPLAY " Your answer is :"
           DISPLAY " code1 is ", code1
           DISPLAY " max1 = ", max1 ",min1 = ", min1
           if (code1  =  0  AND  max1  =  5  AND  min1  =  1) then
      *  EXEC SQL INSERT INTO TESTREPORT
      *    VALUES('0369','pass','MCO') END-EXEC
             CALL "SUB5" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             DISPLAY " *** pass *** "
           else
      *  EXEC SQL INSERT INTO TESTREPORT
      *    VALUES('0369','fail','MCO') END-EXEC
             ADD 1 TO errcnt
             CALL "SUB6" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             DISPLAY " cdr020.sco *** fail *** "
           END-IF
           DISPLAY "================================================"

           DISPLAY  " "
      * EXEC SQL COMMIT WORK;
           CALL "SUB7" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
      ************************ END TEST0369 ************************

      ******************** BEGIN TEST0370 *******************
      * This test try to update FOREIGN KEY TABLE, only
      * temporary conflict
           DISPLAY " TEST0370 "
           DISPLAY " TEMPORARY CONFLICT "
           DISPLAY " SQL with Integrity Enhancement section
      -    " 6.3,6.4"
           DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
           DISPLAY  " "
           DISPLAY " UPDATE SIZ2_F3"
           DISPLAY " SET F1 = F1 + 1;"
           DISPLAY  " "
           DISPLAY " SELECT MAX(F1),MIN(F1) INTO :min1,:max1 "
           DISPLAY "FROM SIZ2_F3;"
           DISPLAY  " "
      * EXEC SQL UPDATE SIZ2_F3
      *  SET F1 = F1 + 1 END-EXEC
           CALL "SUB8" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
           MOVE SQLCODE TO code1
      * EXEC SQL SELECT MAX(F1),MIN(F1) INTO :max1,:min1 FROM SIZ2_F3
      *  END-EXEC
           CALL "SUB9" USING SQLCODE max1 min1
           MOVE SQLCODE TO SQL-COD
      * EXEC SQL ROLLBACK WORK;
           CALL "SUB10" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
           DISPLAY " The correct answer is :"
           DISPLAY " code1 is equal to 0."
           DISPLAY " max1 is 4, min1 is 2."
           DISPLAY " Your answer is :"
           DISPLAY " code1 is ", code1
           DISPLAY " max1 is ", max1 ",min1 is ", min1
           if (code1  =  0  AND  max1  =  4  AND  min1  =  2) then
      *  EXEC SQL INSERT INTO TESTREPORT
      *    VALUES('0370','pass','MCO') END-EXEC
             CALL "SUB11" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             DISPLAY " *** pass *** "
           else
      *  EXEC SQL INSERT INTO TESTREPORT
      *    VALUES('0370','fail','MCO') END-EXEC
             ADD 1 TO errcnt
             CALL "SUB12" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             DISPLAY " cdr020.sco *** fail *** "
           END-IF
           DISPLAY "================================================"

           DISPLAY  " "
      * EXEC SQL COMMIT WORK;
           CALL "SUB13" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
      ************************ END TEST0370 ************************

      ******************** BEGIN TEST0371 *******************
      * This test updates both PRIMARY KEY TABLE & FOREIGN
      * KEY TABLE, only temporary conflict
           DISPLAY " TEST0371 "
           DISPLAY " TEMPORARY CONFLICT "
           DISPLAY " SQL with Integrity Enhancement section
      -    " 6.3,6.4"
           DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
           DISPLAY  " "
           DISPLAY " INSERT INTO MID1"
           DISPLAY " VALUES(1,1);"
           DISPLAY " INSERT INTO MID1"
           DISPLAY " VALUES(2,1);"
           DISPLAY " INSERT INTO MID1"
           DISPLAY " VALUES(3,2);"
           DISPLAY " INSERT INTO MID1"
           DISPLAY " VALUES(4,3);"
           DISPLAY " INSERT INTO MID1"
           DISPLAY " VALUES(5,1);"
           DISPLAY " UPDATE MID1"
           DISPLAY " SET P_KEY = P_KEY + 1,"
           DISPLAY " F_KEY = F_KEY + 1;"

      * EXEC SQL INSERT INTO MID1
      *  VALUES(1,1) END-EXEC
           CALL "SUB14" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
      * EXEC SQL INSERT INTO MID1
      *  VALUES(2,1) END-EXEC
           CALL "SUB15" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
      * EXEC SQL INSERT INTO MID1
      *  VALUES(3,2) END-EXEC
           CALL "SUB16" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
      * EXEC SQL INSERT INTO MID1
      *  VALUES(4,3) END-EXEC
           CALL "SUB17" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
      * EXEC SQL INSERT INTO MID1
      *  VALUES(5,1) END-EXEC
           CALL "SUB18" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
      * EXEC SQL UPDATE MID1
      *  SET P_KEY = P_KEY + 1,
      *  F_KEY = F_KEY + 1 END-EXEC
           CALL "SUB19" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
           MOVE SQLCODE TO code1
      * EXEC SQL SELECT MAX(F_KEY),MIN(F_KEY),MAX(P_KEY),MIN(P_KEY)
      *  INTO :max1,:min1,:max2,:min2 FROM MID1 END-EXEC
           CALL "SUB20" USING SQLCODE max1 min1 max2 min2
           MOVE SQLCODE TO SQL-COD
      * EXEC SQL ROLLBACK WORK;
           CALL "SUB21" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
           DISPLAY " The correct answer is :"
           DISPLAY " code1 is equal to 0."
           DISPLAY " max1 is 4, min1 is 2."
           DISPLAY " max2 is 6, min2 is 2."
           DISPLAY " Your answer is :"
           DISPLAY " code1 is ", code1
           DISPLAY " max1 is ", max1 ",min1 is ", min1
           DISPLAY " max2 is ", max2 ",min2 is ", min2
           if (code1  =  0  AND  max1  =  4  AND  min1  =  2  AND  max2
             =  6  AND  min2  =  2) then
      *  EXEC SQL INSERT INTO TESTREPORT
      *    VALUES('0371','pass','MCO') END-EXEC
             CALL "SUB22" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             DISPLAY " *** pass *** "
           else
      *  EXEC SQL INSERT INTO TESTREPORT
      *    VALUES('0371','fail','MCO') END-EXEC
             ADD 1 TO errcnt
             CALL "SUB23" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             DISPLAY " cdr020.sco *** fail *** "
           END-IF
           DISPLAY "================================================"

           DISPLAY  " "
      * EXEC SQL COMMIT WORK;
           CALL "SUB24" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
      ************************ END TEST0371 ************************

      ******************** BEGIN TEST0372 *******************
      *delete from self_reference table, temporary conflict
           DISPLAY " TEST0372 "
           DISPLAY " TEMPORARY CONFLICT "
           DISPLAY " SQL with Integrity Enhancement section
      -    " 6.3,6.4"
           DISPLAY " - - - - - - - - - - - - - - - - - - - - - "
           DISPLAY  " "
           DISPLAY " DELETE FROM STAFF_C"
           DISPLAY " WHERE EMPNUM = 'E2' OR MGR = 'E2';"
           DISPLAY  " "
           DISPLAY " SELECT COUNT(*)"
           DISPLAY " INTO :count1 FROM STAFF_C;"
           DISPLAY  " "
      * EXEC SQL DELETE FROM STAFF_C
      *  WHERE EMPNUM = 'E2' OR MGR = 'E2' END-EXEC
           CALL "SUB25" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
           MOVE SQLCODE TO code1
      * EXEC SQL SELECT COUNT(*)
      *  INTO :count1 FROM STAFF_C END-EXEC
           CALL "SUB26" USING SQLCODE count1
           MOVE SQLCODE TO SQL-COD
      * EXEC SQL ROLLBACK WORK;
           CALL "SUB27" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
           DISPLAY " The correct answer is :"
           DISPLAY " code1 is equal to 0."
           DISPLAY " count1 is 4."
           DISPLAY " Your answer is :"
           DISPLAY " code1 is ", code1
           DISPLAY " count1 is ", count1
           if (code1  =  0  AND  count1  =  4) then
      *  EXEC SQL INSERT INTO TESTREPORT
      *    VALUES('0372','pass','MCO') END-EXEC
             CALL "SUB28" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             DISPLAY " *** pass *** "
           else
      *  EXEC SQL INSERT INTO TESTREPORT
      *    VALUES('0372','fail','MCO') END-EXEC
             ADD 1 TO errcnt
             CALL "SUB29" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             DISPLAY " cdr020.sco *** fail *** "
           END-IF
           DISPLAY "================================================"

           DISPLAY  " "
      * EXEC SQL COMMIT WORK;
           CALL "SUB30" USING SQLCODE
           MOVE SQLCODE TO SQL-COD
      ************************ END TEST0372 ************************

      **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
           STOP RUN.

      *    ****  Procedures for PERFORM statements

quality100%

¤ Dauer der Verarbeitung: 0.3 Sekunden (vorverarbeitet) ¤

Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.