Ziele Untersuchung
mit Columbo Integrität von
Datenbanken Interaktion und
Portierbarkeit Ergonomie der
Schnittstellen

Angebot Produkte Projekt Beratung

Mittel Analytik Modellierung Sprachen Algebra Logik Hardware Denken Kreativität

Zusammenhänge Gesellschaft Wirtschaft Branche Firma


products/sources/formale Sprachen/Cobol/Test-Suite/SQL M/ Datei vom 4.1.2008 mit Größe 6 kB

Impressum sdl031.cob Sprache: Cobol

       IDENTIFICATION DIVISION.
       PROGRAM-ID.  SDL031.
       ENVIRONMENT DIVISION.
       CONFIGURATION SECTION.
       SOURCE-COMPUTER.  xyz.
       OBJECT-COMPUTER.  xyz.
       DATA DIVISION.
       WORKING-STORAGE SECTION.

      * Standard COBOL (file "SDL031.SCO") calling SQL
      * procedures in file "SDL031.MCO".
      * STANDARD COBOL (file "SDL031.SCO")

      ****************************************************************
      *
      *                 COMMENT SECTION
      *
      * DATE 1992/06/11 STANDARD COBOL LANGUAGE
      * NIST SQL VALIDATION TEST SUITE V6.0
      *  DISCLAIMER:
      *  This program was written by employees of NIST to test SQL
      *  implementations for conformance to the SQL standards.
      *  NIST assumes no responsibility for any party's use of
      *  this program.
      *
      * SDL031.SCO
      * WRITTEN BY: DAVID W. FLATER
      *
      *   THIS ROUTINE TESTS THE SCHEMA DEFINITION LANGUAGE FOR SQL.
      *
      * REFERENCES
      *   ANSI SQL-1992
      *     11.36  <grant statement>
      *
      ****************************************************************

      * EXEC SQL BEGIN DECLARE SECTION END-EXEC
       01  tmpint PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  uid PIC  X(18).
       01  uidx PIC  X(18).
      *  EXEC SQL END DECLARE SECTION END-EXEC

       01  SQLCODE PIC S9(9) COMP.
       01  errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
      *date_time declaration
       01  TO-DAY PIC 9(6).
       01  THE-TIME PIC 9(8).
       01  ii PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       01  SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       PROCEDURE DIVISION.
       P0.

             MOVE "SCHANZLE" TO uid
             CALL "AUTHID" USING uid
             MOVE "not logged in, not" TO uidx
      *  EXEC SQL SELECT USER INTO :uidx FROM HU.ECCO;
             CALL "SUB1" USING SQLCODE uidx
             MOVE SQLCODE TO SQL-COD
             if (uid  NOT  =   uidx) then
               DISPLAY "ERROR: User ", uid " expected. User ", uidx "
      -    " connected"
             STOP RUN
             END-IF
             MOVE 0 TO errcnt
             DISPLAY "SQL Test Suite, V6.0, Standard COBOL, sdl031.
      -    "pco"
           DISPLAY
           "59-byte ID"
           DISPLAY "TEd Version #"
      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

      ******************** BEGIN TEST0468 *******************
             MOVE 1 TO flag

      *HU has been granted all privileges on CUGINI.VTABLE.
      *SCHANZLE has been granted none.
      *This tests the granularity of grants as well as
      *the overall correctness.

             DISPLAY " TEST0468 "
             DISPLAY " Priv.violation: indiv. no privileges."
             DISPLAY "Reference ANSI SQL-1992 11.36 "
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             DISPLAY "DELETE FROM CUGINI.VTABLE;"
      *  EXEC SQL DELETE FROM CUGINI.VTABLE;
             CALL "SUB2" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             MOVE SQLCODE TO ii
             DISPLAY "SQLCODE should be < 0; its value is ", ii

             if (ii  NOT <  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "INSERT INTO CUGINI.VTABLE VALUES (0,1,2,3,4.25);"
      *  EXEC SQL INSERT INTO CUGINI.VTABLE
      *    VALUES (0,1,2,3,4.25);
             CALL "SUB3" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             MOVE SQLCODE TO ii
             DISPLAY "SQLCODE should be < 0; its value is ", ii

             if (ii  NOT <  0) then
               MOVE 0 TO flag
             END-IF

             MOVE 0 TO tmpint
             DISPLAY "SELECT COL2 INTO :tmpint FROM CUGINI.VTABLE"
             DISPLAY "WHERE COL1 = 0;"
      *  EXEC SQL SELECT COL2 INTO :tmpint FROM CUGINI.VTABLE
      *    WHERE COL1 = 0;
             CALL "SUB4" USING SQLCODE tmpint
             MOVE SQLCODE TO SQL-COD
             MOVE SQLCODE TO ii
             DISPLAY "SQLCODE should be < 0; its value is ", ii
             DISPLAY "tmpint should NOT be 1; its value is ", tmpint

             if (ii  NOT <  0  OR  tmpint  =  1) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "UPDATE CUGINI.VTABLE"
             DISPLAY " SET COL2 = 2;"
      *  EXEC SQL UPDATE CUGINI.VTABLE
      *    SET COL2 = 2;
             CALL "SUB5" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             MOVE SQLCODE TO ii
             DISPLAY "SQLCODE should be < 0; its value is ", ii

             if (ii  NOT <  0) then
               MOVE 0 TO flag
             END-IF

      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB6" USING SQLCODE
             MOVE SQLCODE TO SQL-COD

             if ( flag  =  1 ) then
               DISPLAY " *** pass *** "
      *    EXEC SQL INSERT INTO HU.TESTREPORT
      *      VALUES('0468','pass','MCO');
               CALL "SUB7" USING SQLCODE
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " sdl031.sco *** fail *** "
      *    EXEC SQL INSERT INTO HU.TESTREPORT
      *      VALUES('0468','fail','MCO');
               CALL "SUB8" USING SQLCODE
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

      *  EXEC SQL COMMIT WORK;
             CALL "SUB9" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST0468 ********************

      ******************** BEGIN TEST0469 *******************
             MOVE 1 TO flag

             DISPLAY " TEST0469 "
             DISPLAY " GRANT ALL PRIVILEGES to indiv."
             DISPLAY "Reference ANSI SQL-1992 11.36 "
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

      *Safety
      *  EXEC SQL DELETE FROM CUGINI.II;
             CALL "SUB10" USING SQLCODE
             MOVE SQLCODE TO SQL-COD

             DISPLAY "INSERT INTO CUGINI.II VALUES (2);"
      *  EXEC SQL INSERT INTO CUGINI.II VALUES (2);
             CALL "SUB11" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             MOVE SQLCODE TO ii
             DISPLAY "SQLCODE should be 0; its value is ", ii

             if (ii  NOT =  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "UPDATE CUGINI.II SET C1 = 3"
             DISPLAY "WHERE C1 = 2;"
      *  EXEC SQL UPDATE CUGINI.II
      *    SET C1 = 3
      *    WHERE C1 = 2;
             CALL "SUB12" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             MOVE SQLCODE TO ii
             DISPLAY "SQLCODE should be 0; its value is ", ii

             if (ii  NOT =  0) then
               MOVE 0 TO flag
             END-IF

             MOVE 0 TO tmpint
             DISPLAY "SELECT C1 INTO :tmpint FROM CUGINI.II;"
      *  EXEC SQL SELECT C1 INTO :tmpint
      *    FROM CUGINI.II;
             CALL "SUB13" USING SQLCODE tmpint
             MOVE SQLCODE TO SQL-COD
             MOVE SQLCODE TO ii
             DISPLAY "SQLCODE should be 0; its value is ", ii
             DISPLAY "tmpint should be 3; its value is ", tmpint

             if (ii  NOT =  0  OR  tmpint  NOT =  3) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "DELETE FROM CUGINI.II;"
      *  EXEC SQL DELETE FROM CUGINI.II;
             CALL "SUB14" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             MOVE SQLCODE TO ii
             DISPLAY "SQLCODE should be 0; its value is ", ii

             if (ii  NOT =  0) then
               MOVE 0 TO flag
             END-IF

      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB15" USING SQLCODE
             MOVE SQLCODE TO SQL-COD

             if ( flag  =  1 ) then
               DISPLAY " *** pass *** "
      *    EXEC SQL INSERT INTO HU.TESTREPORT
      *      VALUES('0469','pass','MCO');
               CALL "SUB16" USING SQLCODE
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " sdl031.sco *** fail *** "
      *    EXEC SQL INSERT INTO HU.TESTREPORT
      *      VALUES('0469','fail','MCO');
               CALL "SUB17" USING SQLCODE
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

      *  EXEC SQL COMMIT WORK;
             CALL "SUB18" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST0469 ********************

      ******************** BEGIN TEST0470 *******************
             MOVE 1 TO flag

             DISPLAY " TEST0470 "
             DISPLAY " GRANT ALL PRIVILEGES to public"
             DISPLAY "Reference ANSI SQL-1992 11.36 "
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

      *Safety
      *  EXEC SQL DELETE FROM CUGINI.JJ;
             CALL "SUB19" USING SQLCODE
             MOVE SQLCODE TO SQL-COD

             DISPLAY "INSERT INTO CUGINI.JJ VALUES (2);"
      *  EXEC SQL INSERT INTO CUGINI.JJ VALUES (2);
             CALL "SUB20" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             MOVE SQLCODE TO ii
             DISPLAY "SQLCODE should be 0; its value is ", ii

             if (ii  NOT =  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "UPDATE CUGINI.JJ SET C1 = 3"
             DISPLAY "WHERE C1 = 2;"
      *  EXEC SQL UPDATE CUGINI.JJ
      *    SET C1 = 3
      *    WHERE C1 = 2;
             CALL "SUB21" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             MOVE SQLCODE TO ii
             DISPLAY "SQLCODE should be 0; its value is ", ii

             if (ii  NOT =  0) then
               MOVE 0 TO flag
             END-IF

             MOVE 0 TO tmpint
             DISPLAY "SELECT C1 INTO :tmpint FROM CUGINI.JJ;"
      *  EXEC SQL SELECT C1 INTO :tmpint
      *    FROM CUGINI.JJ;
             CALL "SUB22" USING SQLCODE tmpint
             MOVE SQLCODE TO SQL-COD
             MOVE SQLCODE TO ii
             DISPLAY "SQLCODE should be 0; its value is ", ii
             DISPLAY "tmpint should be 3; its value is ", tmpint

             if (ii  NOT =  0  OR  tmpint  NOT =  3) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "DELETE FROM CUGINI.JJ;"
      *  EXEC SQL DELETE FROM CUGINI.JJ;
             CALL "SUB23" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             MOVE SQLCODE TO ii
             DISPLAY "SQLCODE should be 0; its value is ", ii

             if (ii  NOT =  0) then
               MOVE 0 TO flag
             END-IF

      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB24" USING SQLCODE
             MOVE SQLCODE TO SQL-COD

             if ( flag  =  1 ) then
               DISPLAY " *** pass *** "
      *    EXEC SQL INSERT INTO HU.TESTREPORT
      *      VALUES('0470','pass','MCO');
               CALL "SUB25" USING SQLCODE
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " sdl031.sco *** fail *** "
      *    EXEC SQL INSERT INTO HU.TESTREPORT
      *      VALUES('0470','fail','MCO');
               CALL "SUB26" USING SQLCODE
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

      *  EXEC SQL COMMIT WORK;
             CALL "SUB27" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST0470 ********************

      ******************** BEGIN TEST0471 *******************
             MOVE 1 TO flag

      *Schema 5 contains an attempt by Flater, who has select and
      *update(empnum,empname) on hu.staff3, to grant select and
      *unrestricted update to Schanzle.  This attempt should fail.
      *This test insures that it did.

             DISPLAY " TEST0471 "
             DISPLAY " Priv.violation: GRANT priv. not grantable"
             DISPLAY "Reference ANSI SQL-1992 11.36 "
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             DISPLAY "UPDATE HU.STAFF3 SET GRADE=15 WHERE EMPNUM='E2';"
      *Betty gets an unauthorized promotion
      *  EXEC SQL UPDATE HU.STAFF3
      *    SET GRADE = 15
      *    WHERE EMPNUM = 'E2';
             CALL "SUB28" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
             MOVE SQLCODE TO ii
             DISPLAY "SQLCODE should be < 0; its value is ", ii

             if (ii  NOT <  0) then
               MOVE 0 TO flag
             END-IF

      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB29" USING SQLCODE
             MOVE SQLCODE TO SQL-COD

             if ( flag  =  1 ) then
               DISPLAY " *** pass *** "
      *    EXEC SQL INSERT INTO HU.TESTREPORT
      *      VALUES('0471','pass','MCO');
               CALL "SUB30" USING SQLCODE
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " sdl031.sco *** fail *** "
      *    EXEC SQL INSERT INTO HU.TESTREPORT
      *      VALUES('0471','fail','MCO');
               CALL "SUB31" USING SQLCODE
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

      *  EXEC SQL COMMIT WORK;
             CALL "SUB32" USING SQLCODE
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST0471 ********************

      **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
           STOP RUN.

      *    ****  Procedures for PERFORM statements

quality100%

¤ Diese beiden folgenden Angebotsgruppen bietet das Unternehmen0.14Angebot Wie Sie bei der Firma Beratungs- und Dienstleistungen beauftragen können ¤

*Eine klare Vorstellung vom Zielzustand

Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.