Ziele Untersuchung
mit Columbo Integrität von
Datenbanken Interaktion und
Portierbarkeit Ergonomie der
Schnittstellen

Angebot Produkte Projekt Beratung

Mittel Analytik Modellierung Sprachen Algebra Logik Hardware Denken Kreativität

Zusammenhänge Gesellschaft Wirtschaft Branche Firma


products/sources/formale Sprachen/Cobol/Test-Suite/SQL M/ Datei vom 4.1.2008 mit Größe 45 kB

Quelle mpb010.cob Sprache: Cobol

       IDENTIFICATION DIVISION.
       PROGRAM-ID.  MPB010.
       ENVIRONMENT DIVISION.
       CONFIGURATION SECTION.
       SOURCE-COMPUTER.  xyz.
       OBJECT-COMPUTER.  xyz.
       DATA DIVISION.
       WORKING-STORAGE SECTION.

      * Standard COBOL (file "MPB010.SCO") calling SQL
      * procedures in file "MPB010.MCO".

      ****************************************************************
      *
      *                 COMMENT SECTION
      *
      * DATE 1994/2/16 STANDARD COBOL LANGUAGE
      * NIST SQL VALIDATION TEST SUITE V6.0
      *  DISCLAIMER:
      *  This program was written by employees of NIST to test SQL
      *  implementations for conformance to the SQL standards.
      *  NIST assumes no responsibility for any party's use of
      *  this program.
      *
      * MPB010.SCO
      * WRITTEN BY:  David W. Flater
      * TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
      *
      * This program tests <grant statement> and <revoke statement>
      * in non-dynamic SQL.  This is part B of a two-part
      * concurrency test.  It must be run as HU after MPA010 is
      * run as FLATER.
      *
      * REFERENCES
      *   FIPS PUB 127-2 14.1 Transitional SQL
      *   ANSI SQL-1992
      *
      ****************************************************************

      * EXEC SQL BEGIN DECLARE SECTION END-EXEC
       01  SQLCODE PIC S9(9) COMP.
       01  SQLSTATE PIC  X(5).
       01  uid PIC  X(18).
       01  uidx PIC  X(18).
       01  int1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  progno PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
      *  EXEC SQL END DECLARE SECTION END-EXEC
       01  pauze PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  pauze2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  repcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  iii PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  ALPNUM-TABLE VALUE IS
               "01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
           05  ALPNUM PIC X OCCURS 36 TIMES.
       01  NORMSQ.
           05  NORMSQX PIC X OCCURS 5 TIMES.
       01  errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  fails PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  maxfls PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  oldtok PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  waitin PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
      * Debugging is turned on by setting debug1 = 1
       01  debug1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
      *date_time declaration
       01  TO-DAY PIC 9(6).
       01  THE-TIME PIC 9(8).
       01  flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       01  SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       PROCEDURE DIVISION.
       P0.

             MOVE "HU " TO uid
             CALL "AUTHID" USING uid
             MOVE "not logged in, not" TO uidx
      *  EXEC SQL SELECT USER INTO :uidx FROM HU.ECCO;
             CALL "SUB1" USING SQLCODE SQLSTATE uidx
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB2" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
             if (uid  NOT  =   uidx) then
               DISPLAY "ERROR: User ", uid " expected. User ", uidx "
      -    " connected"
            STOP RUN
             END-IF
             MOVE 0 TO errcnt

             DISPLAY
           "SQL Test Suite, V6.0, Module COBOL, mpb010.sco"
             DISPLAY
           "59-byte ID"
             DISPLAY "TEd Version #"
      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

             DISPLAY "This is part B of a two-part test. It should be
      -    " started"
             DISPLAY "AFTER mpa010. Table TOKENS must exist in schema
      -    " HU."

      *to debug program, set debug1 = 1
             MOVE 0 TO debug1
             MOVE 1000 TO maxfls
             MOVE 1 TO pauze
             MOVE 2 TO pauze2
      *This is not a concurrency test.
      *Using TEd, increase variable pauze if there is MAYDAY message.
             MOVE 10 TO progno

      ******************** BEGIN TEST0627 *******************
             MOVE 1 TO flag

             DISPLAY " TEST0627 "
             DISPLAY " (static)"
             DISPLAY " This is program 'B'"
             DISPLAY "References:"
             DISPLAY " 11.36 "
             DISPLAY " FIPS PUB 127-2 14.1 Transitional SQL feature
      -    " 3"
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

             DISPLAY "You should have already started Program A."
             MOVE 1 TO waitin

           .
        P194.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P194"
             END-IF
             if (waitin  =  -1) then
               GO TO P197
             END-IF
             MOVE 0 TO fails
             COMPUTE oldtok = -1
             DISPLAY "Waiting for the token to reach ", waitin "."
           .
        P104.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P104"
             END-IF
             COMPUTE int1 = -1
      *  EXEC SQL SELECT TOKEN_NO INTO :int1 FROM HU.TOKENS
      *    WHERE PROG_NO = :progno;
             CALL "SUB3" USING SQLCODE SQLSTATE int1 progno
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
               DISPLAY "SQLCODE = ", SQL-COD " SQLSTATE = ",
             SQLSTATE
             END-IF
             if (SQLCODE  NOT <  0  AND  SQLCODE  NOT =  100  AND  int1
             NOT =  oldtok ) then
               DISPLAY "Token = ", int1
               MOVE int1 TO oldtok
               MOVE 0 TO fails
             END-IF
             if (SQLCODE  <  0  OR  SQLCODE  =  100  OR  int1  NOT =
             waitin) then
      *Waste time and try again
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
               if (NORMSQ   =   "21000") then
                 GO TO P198
               END-IF
               COMPUTE fails = fails + 1
               if (fails  >  maxfls) then
                 GO TO P199
               END-IF
      *TEd hook for fixing delays:  024
               PERFORM SLEEEP THRU P133
      *    EXEC SQL ROLLBACK WORK;
               CALL "SUB4" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               GO TO P104
             END-IF

      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

             if (int1  =  1) then
               GO TO P196
             END-IF
             if (int1  =  3) then
               GO TO P190
             END-IF
             if (int1  =  5) then
               GO TO P189
             END-IF
             GO TO P197

      *token == 1
           .
        P196.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P196"
             END-IF
             DISPLAY "Program 'B' trying to access inaccessible table."

             COMPUTE int1 = -1
             DISPLAY "SELECT COUNT(*) INTO :int1 FROM FLATER.GRANT010;"
      *  EXEC SQL SELECT COUNT(*) INTO :int1 FROM FLATER.GRANT010
      * ;
             CALL "SUB5" USING SQLCODE SQLSTATE int1
             MOVE SQLCODE TO SQL-COD
             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE  NOT <  0  OR  NORMSQ  NOT  =   "42000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "42000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "
             DISPLAY "int1 should not be 1; its value is ", int1
             if (int1  =  1) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "INSERT INTO FLATER.GRANT010 VALUES (0);"
      *  EXEC SQL INSERT INTO FLATER.GRANT010 VALUES (0);
             CALL "SUB6" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE  NOT <  0  OR  NORMSQ  NOT  =   "42000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "42000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "

             DISPLAY "UPDATE FLATER.GRANT010 SET C1 = 0;"
      *  EXEC SQL UPDATE FLATER.GRANT010 SET C1 = 0;
             CALL "SUB7" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE  NOT <  0  OR  NORMSQ  NOT  =   "42000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "42000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "

             DISPLAY "DELETE FROM FLATER.GRANT010;"
      *  EXEC SQL DELETE FROM FLATER.GRANT010;
             CALL "SUB8" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE  NOT <  0  OR  NORMSQ  NOT  =   "42000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "42000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
      *  EXEC SQL COMMIT WORK;
             CALL "SUB9" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

             MOVE 3 TO waitin
             GO TO P195

      *token == 3
           .
        P190.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P190"
             END-IF
             DISPLAY "Program 'B' trying to access select-only table."

             COMPUTE int1 = -1
             DISPLAY "SELECT COUNT(*) INTO :int1 FROM FLATER.GRANT010;"
      *  EXEC SQL SELECT COUNT(*) INTO :int1 FROM FLATER.GRANT010
      * ;
             CALL "SUB10" USING SQLCODE SQLSTATE int1
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "int1 should be 1; its value is ", int1
             if (int1  NOT =  1) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "INSERT INTO FLATER.GRANT010 VALUES (0);"
      *  EXEC SQL INSERT INTO FLATER.GRANT010 VALUES (0);
             CALL "SUB11" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE  NOT <  0  OR  NORMSQ  NOT  =   "42000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "42000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "

             DISPLAY "UPDATE FLATER.GRANT010 SET C1 = 0;"
      *  EXEC SQL UPDATE FLATER.GRANT010 SET C1 = 0;
             CALL "SUB12" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE  NOT <  0  OR  NORMSQ  NOT  =   "42000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "42000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "

             DISPLAY "DELETE FROM FLATER.GRANT010;"
      *  EXEC SQL DELETE FROM FLATER.GRANT010;
             CALL "SUB13" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE  NOT <  0  OR  NORMSQ  NOT  =   "42000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "42000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
      *  EXEC SQL COMMIT WORK;
             CALL "SUB14" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

             MOVE 5 TO waitin
             GO TO P195

      *token == 5
           .
        P189.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P189"
             END-IF
             DISPLAY "Program 'B' trying to use all privileges."

             COMPUTE int1 = -1
             DISPLAY "SELECT COUNT(*) INTO :int1 FROM FLATER.GRANT010;"
      *  EXEC SQL SELECT COUNT(*) INTO :int1 FROM FLATER.GRANT010
      * ;
             CALL "SUB15" USING SQLCODE SQLSTATE int1
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "int1 should be 1; its value is ", int1
             if (int1  NOT =  1) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "INSERT INTO FLATER.GRANT010 VALUES (0);"
      *  EXEC SQL INSERT INTO FLATER.GRANT010 VALUES (0);
             CALL "SUB16" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             COMPUTE int1 = -1
             DISPLAY "SELECT COUNT(*) INTO :int1 FROM FLATER.GRANT010;"
      *  EXEC SQL SELECT COUNT(*) INTO :int1 FROM FLATER.GRANT010
      * ;
             CALL "SUB17" USING SQLCODE SQLSTATE int1
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "int1 should be 2; its value is ", int1
             if (int1  NOT =  2) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "UPDATE FLATER.GRANT010 SET C1 = 0;"
      *  EXEC SQL UPDATE FLATER.GRANT010 SET C1 = 0;
             CALL "SUB18" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             COMPUTE int1 = -1
             DISPLAY "SELECT COUNT(*) INTO :int1 FROM FLATER.GRANT010"
             DISPLAY " WHERE C1 = 0;"
      *  EXEC SQL SELECT COUNT(*) INTO :int1 FROM FLATER.GRANT010
      *    WHERE C1 = 0;
             CALL "SUB19" USING SQLCODE SQLSTATE int1
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "int1 should be 2; its value is ", int1
             if (int1  NOT =  2) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "DELETE FROM FLATER.GRANT010;"
      *  EXEC SQL DELETE FROM FLATER.GRANT010;
             CALL "SUB20" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             COMPUTE int1 = -1
             DISPLAY "SELECT COUNT(*) INTO :int1 FROM FLATER.GRANT010;"
      *  EXEC SQL SELECT COUNT(*) INTO :int1 FROM FLATER.GRANT010
      * ;
             CALL "SUB21" USING SQLCODE SQLSTATE int1
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "int1 should be 0; its value is ", int1
             if (int1  NOT =  0) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "COMMIT WORK;"
      *  EXEC SQL COMMIT WORK;
             CALL "SUB22" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

             DISPLAY "Program 'B' trying to use grant option (should
      -    " fail)."

             DISPLAY "GRANT SELECT ON FLATER.GRANT010 TO SCHANZLE;"
      *  EXEC SQL GRANT SELECT ON FLATER.GRANT010 TO SCHANZLE
      * ;
             CALL "SUB23" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
             DISPLAY "SQLCODE should be >= 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 01007; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE  <  0  OR  NORMSQ  NOT  =   "01007") then
               MOVE 0 TO flag
             END-IF

             DISPLAY "COMMIT WORK;"
      *  EXEC SQL COMMIT WORK;
             CALL "SUB24" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

             COMPUTE waitin = -1

           .
        P195.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P195"
             END-IF
             MOVE 0 TO fails
      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
             DISPLAY "Incrementing token"
           .
        P193.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P193"
             END-IF
      *  EXEC SQL UPDATE TOKENS SET TOKEN_NO = TOKEN_NO + 1
      *    WHERE PROG_NO = :progno;
             CALL "SUB25" USING SQLCODE SQLSTATE progno
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
      *Waste time and try again
               DISPLAY "SQLCODE = ", SQL-COD " SQLSTATE = ",
             SQLSTATE
               COMPUTE fails = fails + 1
               if (fails  >  maxfls) then
                 GO TO P199
               END-IF
      *TEd hook for fixing delays:  025
               PERFORM SLEEEP THRU P133
      *    EXEC SQL ROLLBACK WORK;
               CALL "SUB26" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               GO TO P193
             END-IF
      *  EXEC SQL COMMIT WORK;
             CALL "SUB27" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
      *Waste time and try again
               DISPLAY "SQLCODE = ", SQL-COD " SQLSTATE = ",
             SQLSTATE
               COMPUTE fails = fails + 1
               if (fails  >  maxfls) then
                 GO TO P199
               END-IF
      *TEd hook for fixing delays:  026
               PERFORM SLEEEP THRU P133
      *    EXEC SQL ROLLBACK WORK;
               CALL "SUB28" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               GO TO P193
             END-IF
      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
             GO TO P194

      *after token == 5
           .
        P197.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P197"
             END-IF

             if ( flag  =  1 ) then
               DISPLAY " *** pass *** "
      *    EXEC SQL INSERT INTO TESTREPORT
      *      VALUES('0627','pass','MCO');
               CALL "SUB29" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " mpb010.sco *** fail *** "
      *    EXEC SQL INSERT INTO TESTREPORT
      *      VALUES('0627','fail','MCO');
               CALL "SUB30" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

      *  EXEC SQL COMMIT WORK;
             CALL "SUB31" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST0627 ********************
      ******************** BEGIN TEST0628 *******************
             MOVE 1 TO flag

             DISPLAY " TEST0628 "
             DISPLAY " (static)"
             DISPLAY " This is program 'B'"
             DISPLAY "References:"
             DISPLAY " 11.37 "
             DISPLAY " FIPS PUB 127-2 14.1 Transitional SQL feature
      -    " 3"
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
             DISPLAY "You should have already started Program A."
             MOVE 1 TO waitin

           .
        P160.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P160"
             END-IF
             if (waitin  =  -1) then
               GO TO P163
             END-IF
             MOVE 0 TO fails
             COMPUTE oldtok = -1
             DISPLAY "Waiting for the token to reach ", waitin "."
           .
        P161.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P161"
             END-IF
             COMPUTE int1 = -1
      *  EXEC SQL SELECT TOKEN_NO INTO :int1 FROM HU.TOKENS
      *    WHERE PROG_NO = :progno;
             CALL "SUB32" USING SQLCODE SQLSTATE int1 progno
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
               DISPLAY "SQLCODE = ", SQL-COD " SQLSTATE = ",
             SQLSTATE
             END-IF
             if (SQLCODE  NOT <  0  AND  SQLCODE  NOT =  100  AND  int1
             NOT =  oldtok ) then
               DISPLAY "Token = ", int1
               MOVE int1 TO oldtok
               MOVE 0 TO fails
             END-IF
             if (SQLCODE  <  0  OR  SQLCODE  =  100  OR  int1  NOT =
             waitin) then
      *Waste time and try again
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
               if (NORMSQ   =   "21000") then
                 GO TO P198
               END-IF
               COMPUTE fails = fails + 1
               if (fails  >  maxfls) then
                 GO TO P199
               END-IF
      *TEd hook for fixing delays:  027
               PERFORM SLEEEP THRU P133
      *    EXEC SQL ROLLBACK WORK;
               CALL "SUB33" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               GO TO P161
             END-IF

      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

             if (int1  =  1) then
               GO TO P162
             END-IF
             if (int1  =  3) then
               GO TO P170
             END-IF
             GO TO P163

      *token == 1
           .
        P162.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P162"
             END-IF
             DISPLAY "Program 'B' trying to access insert-only table."

             DISPLAY "SELECT COUNT(*) INTO :int1 FROM FLATER.GRANT010;"
      *  EXEC SQL SELECT COUNT(*) INTO :int1 FROM FLATER.GRANT010
      * ;
             CALL "SUB34" USING SQLCODE SQLSTATE int1
             MOVE SQLCODE TO SQL-COD
             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE  NOT <  0  OR  NORMSQ  NOT  =   "42000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "42000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "

             DISPLAY "INSERT INTO FLATER.GRANT010 VALUES (0);"
      *  EXEC SQL INSERT INTO FLATER.GRANT010 VALUES (0);
             CALL "SUB35" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "UPDATE FLATER.GRANT010 SET C1 = 0;"
      *  EXEC SQL UPDATE FLATER.GRANT010 SET C1 = 0;
             CALL "SUB36" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE  NOT <  0  OR  NORMSQ  NOT  =   "42000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "42000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "

             DISPLAY "DELETE FROM FLATER.GRANT010;"
      *  EXEC SQL DELETE FROM FLATER.GRANT010;
             CALL "SUB37" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE  NOT <  0  OR  NORMSQ  NOT  =   "42000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "42000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
      *  EXEC SQL COMMIT WORK;
             CALL "SUB38" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

             MOVE 3 TO waitin
             GO TO P164

      *token == 3
           .
        P170.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P170"
             END-IF
             DISPLAY "Program 'B' trying to access inaccessible table."

             DISPLAY "SELECT COUNT(*) INTO :int1 FROM FLATER.GRANT010;"
      *  EXEC SQL SELECT COUNT(*) INTO :int1 FROM FLATER.GRANT010
      * ;
             CALL "SUB39" USING SQLCODE SQLSTATE int1
             MOVE SQLCODE TO SQL-COD
             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE  NOT <  0  OR  NORMSQ  NOT  =   "42000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "42000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "

             DISPLAY "INSERT INTO FLATER.GRANT010 VALUES (0);"
      *  EXEC SQL INSERT INTO FLATER.GRANT010 VALUES (0);
             CALL "SUB40" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE  NOT <  0  OR  NORMSQ  NOT  =   "42000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "42000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "

             DISPLAY "UPDATE FLATER.GRANT010 SET C1 = 0;"
      *  EXEC SQL UPDATE FLATER.GRANT010 SET C1 = 0;
             CALL "SUB41" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE  NOT <  0  OR  NORMSQ  NOT  =   "42000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "42000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "

             DISPLAY "DELETE FROM FLATER.GRANT010;"
      *  EXEC SQL DELETE FROM FLATER.GRANT010;
             CALL "SUB42" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE  NOT <  0  OR  NORMSQ  NOT  =   "42000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "42000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
      *  EXEC SQL COMMIT WORK;
             CALL "SUB43" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD

             COMPUTE waitin = -1

           .
        P164.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P164"
             END-IF
             MOVE 0 TO fails
      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
             DISPLAY "Incrementing token"
           .
        P165.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P165"
             END-IF
      *  EXEC SQL UPDATE TOKENS SET TOKEN_NO = TOKEN_NO + 1
      *    WHERE PROG_NO = :progno;
             CALL "SUB44" USING SQLCODE SQLSTATE progno
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
      *Waste time and try again
               DISPLAY "SQLCODE = ", SQL-COD " SQLSTATE = ",
             SQLSTATE
               COMPUTE fails = fails + 1
               if (fails  >  maxfls) then
                 GO TO P199
               END-IF
      *TEd hook for fixing delays:  028
               PERFORM SLEEEP THRU P133
      *    EXEC SQL ROLLBACK WORK;
               CALL "SUB45" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               GO TO P165
             END-IF
      *  EXEC SQL COMMIT WORK;
             CALL "SUB46" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
      *Waste time and try again
               DISPLAY "SQLCODE = ", SQL-COD " SQLSTATE = ",
             SQLSTATE
               COMPUTE fails = fails + 1
               if (fails  >  maxfls) then
                 GO TO P199
               END-IF
      *TEd hook for fixing delays:  029
               PERFORM SLEEEP THRU P133
      *    EXEC SQL ROLLBACK WORK;
               CALL "SUB47" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               GO TO P165
             END-IF
      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
             GO TO P160

      *after token == 3
           .
        P163.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P163"
             END-IF

             if ( flag  =  1 ) then
               DISPLAY " *** pass *** "
      *    EXEC SQL INSERT INTO TESTREPORT
      *      VALUES('0628','pass','MCO');
               CALL "SUB48" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " mpb010.sco *** fail *** "
      *    EXEC SQL INSERT INTO TESTREPORT
      *      VALUES('0628','fail','MCO');
               CALL "SUB49" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

      *  EXEC SQL COMMIT WORK;
             CALL "SUB50" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST0628 ********************
      ******************** BEGIN TEST0560 *******************
             MOVE 1 TO flag

             DISPLAY " TEST0560 "
             DISPLAY " Table privileges vs. column privileges"
             DISPLAY " This is program 'B'"
             DISPLAY "References:"
             DISPLAY " 11.37 "
             DISPLAY " F# 3 -- Basic schema manipulation"
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
             DISPLAY "You should have already started Program A."
             MOVE 1 TO waitin

             MOVE 0 TO fails
             COMPUTE oldtok = -1
             DISPLAY "Waiting for the token to reach ", waitin "."
           .
        P151.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P151"
             END-IF
             COMPUTE int1 = -1
      *  EXEC SQL SELECT TOKEN_NO INTO :int1 FROM HU.TOKENS
      *    WHERE PROG_NO = :progno;
             CALL "SUB51" USING SQLCODE SQLSTATE int1 progno
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
               DISPLAY "SQLCODE = ", SQL-COD " SQLSTATE = ",
             SQLSTATE
             END-IF
             if (SQLCODE  NOT <  0  AND  SQLCODE  NOT =  100  AND  int1
             NOT =  oldtok ) then
               DISPLAY "Token = ", int1
               MOVE int1 TO oldtok
               MOVE 0 TO fails
             END-IF
             if (SQLCODE  <  0  OR  SQLCODE  =  100  OR  int1  NOT =
             waitin) then
      *Waste time and try again
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
               if (NORMSQ   =   "21000") then
                 GO TO P198
               END-IF
               COMPUTE fails = fails + 1
               if (fails  >  maxfls * maxfls) then
                 GO TO P199
               END-IF
      *TEd hook for fixing delays:  030
               PERFORM SLEEEP THRU P133
      *    EXEC SQL ROLLBACK WORK;
               CALL "SUB52" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               GO TO P151
             END-IF

             MOVE 0 TO fails
      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

      *token == 1
             DISPLAY "Program 'B' testing access to FLATER.X"

             DISPLAY "UPDATE FLATER.X SET A = 0;"
      *  EXEC SQL UPDATE FLATER.X SET A = 0;
             CALL "SUB53" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "UPDATE FLATER.X SET B = 0;"
      *  EXEC SQL UPDATE FLATER.X SET B = 0;
             CALL "SUB54" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
             DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 42000; its value is ", SQLSTATE
           PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE  NOT <  0  OR  NORMSQ  NOT  =   "42000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ   =   "42000"  AND  NORMSQ  NOT  =   SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             DISPLAY  " "

             DISPLAY "UPDATE FLATER.X SET C = 0;"
      *  EXEC SQL UPDATE FLATER.X SET C = 0;
             CALL "SUB55" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "UPDATE FLATER.X SET D = 0;"
      *  EXEC SQL UPDATE FLATER.X SET D = 0;
             CALL "SUB56" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             COMPUTE int1 = -1
             DISPLAY "SELECT COUNT(*) INTO :int1 FROM FLATER.X"
             DISPLAY " WHERE A = 0 AND B = 2 AND C = 0 AND D = 0;"
      *  EXEC SQL SELECT COUNT(*) INTO :int1 FROM FLATER.X
      *    WHERE A = 0 AND B = 2 AND C = 0 AND D = 0;
             CALL "SUB57" USING SQLCODE SQLSTATE int1
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "int1 should be 1; its value is ", int1
             if (int1  NOT =  1) then
               MOVE 0 TO flag
             END-IF

             DISPLAY "COMMIT WORK;"
      *  EXEC SQL COMMIT WORK;
             CALL "SUB58" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             MOVE 0 TO fails
      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
             DISPLAY "Incrementing token"
           .
        P155.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P155"
             END-IF
      *  EXEC SQL UPDATE TOKENS SET TOKEN_NO = TOKEN_NO + 1
      *    WHERE PROG_NO = :progno;
             CALL "SUB59" USING SQLCODE SQLSTATE progno
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
      *Waste time and try again
               DISPLAY "SQLCODE = ", SQL-COD " SQLSTATE = ",
             SQLSTATE
               COMPUTE fails = fails + 1
               if (fails  >  maxfls) then
                 GO TO P199
               END-IF
      *TEd hook for fixing delays:  031
               PERFORM SLEEEP THRU P133
      *    EXEC SQL ROLLBACK WORK;
               CALL "SUB60" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               GO TO P155
             END-IF
      *  EXEC SQL COMMIT WORK;
             CALL "SUB61" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
             if (SQLCODE  <  0) then
      *Waste time and try again
               DISPLAY "SQLCODE = ", SQL-COD " SQLSTATE = ",
             SQLSTATE
               COMPUTE fails = fails + 1
               if (fails  >  maxfls) then
                 GO TO P199
               END-IF
      *TEd hook for fixing delays:  032
               PERFORM SLEEEP THRU P133
      *    EXEC SQL ROLLBACK WORK;
               CALL "SUB62" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               GO TO P155
             END-IF
      *after token == 1

             if ( flag  =  1 ) then
               DISPLAY " *** pass *** "
      *    EXEC SQL INSERT INTO TESTREPORT
      *      VALUES('0560','pass','MCO');
               CALL "SUB63" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " mpb010.sco *** fail *** "
      *    EXEC SQL INSERT INTO TESTREPORT
      *      VALUES('0560','fail','MCO');
               CALL "SUB64" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "==============================================="

      *  EXEC SQL COMMIT WORK;
             CALL "SUB65" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST0560 ********************
           STOP RUN.

        P198.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P198"
             END-IF
             DISPLAY "CARDINALITY VIOLATION"
           .
        P199.
             if (debug1  NOT =  0) then
               DISPLAY "Debug trace: P199"
             END-IF
             if (fails  >  maxfls)  then
               DISPLAY "The number of attempts (fails) exceeds variable
      -    " maxfls."
               DISPLAY "Increase the value of variable maxfls, if
      -    " needed."
               DISPLAY "Or, increase the value of variable pauze."
             END-IF
             DISPLAY "MAYDAY MAYDAY PROGRAM ABORTING"
             DISPLAY "You will have to start this test over."
           STOP RUN.

      *    ****  Procedures for PERFORM statements

      *Test SQLCODE and SQLSTATE for normal completion.
       CHCKOK.
             DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
             PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE NOT =  0  OR   NORMSQ NOT = "00000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ = "00000"  AND  NORMSQ NOT = SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             .

       NOSUBCLASS.

      *This routine replaces valid implementation-defined
      *subclasses with 000.  This replacement equates valid
      *implementation-defined subclasses with the 000 value
      *expected by the test case; otherwise the test will fail.
      *After calling NOSUBCLASS, NORMSQ will be tested
      *                          SQLSTATE will be printed.

           MOVE SQLSTATE TO NORMSQ

           MOVE 3 TO norm1
      *subclass begins in position 3 of char array NORMSQ
      *valid subclass begins with 5-9, I-Z, end of ALPNUM table
           PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *Quit if NORMSQ is unchanged.  Subclass is not impl.-def.
      *Changed NORMSQ means implementation-defined subclass,
      *so proceed to zero it out, if valid (0-9,A-Z)
           if (NORMSQ   =   SQLSTATE) then
             GO TO EXIT-NOSUBCLASS
           END-IF

           MOVE 4 TO norm1
      *examining position 4 of char array NORMSQ
      *valid characters are 0-9, A-Z
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

           MOVE 5 TO norm1
      *valid characters are 0-9, A-Z
      *examining position 5 of char array NORMSQ
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *implementation-defined subclasses are allowed for warnings
      *(class = 01).  These equate to successful completion
      *SQLSTATE values of 00000.
      *Reference SQL-92 4.28 SQL-transactions, paragraph 2

           if (NORMSQX(1)  =  "0"  AND  NORMSQX(2)  =  "1") then
             MOVE "0" TO NORMSQX(2)
           END-IF
           .

       EXIT-NOSUBCLASS.
           EXIT.

       SLEEEP.
             COMPUTE repcnt = fails * pauze
             if (repcnt  >  17) then
               COMPUTE repcnt = repcnt * repcnt + pauze2
             END-IF
             MOVE 1 TO iii
           .
       P133.
      *  EXEC SQL COMMIT WORK;
             CALL "SUB66" USING SQLCODE SQLSTATE
             COMPUTE int1 = -1
      *  EXEC SQL UPDATE HU.WORKS
      *    SET HOURS = -1 WHERE HOURS = :int1;
             CALL "SUB67" USING SQLCODE SQLSTATE int1
             COMPUTE iii = iii + 1
             if (iii  <  repcnt) then
               GO TO P133
             END-IF
             .

quality95%

¤ Dauer der Verarbeitung: 0.26 Sekunden (vorverarbeitet) ¤

Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.