Ziele Untersuchung
mit Columbo Integrität von
Datenbanken Interaktion und
Portierbarkeit Ergonomie der
Schnittstellen

Angebot Produkte Projekt Beratung

Mittel Analytik Modellierung Sprachen Algebra Logik Hardware Denken Kreativität

Zusammenhänge Gesellschaft Wirtschaft Branche Firma


products/sources/formale Sprachen/Cobol/Test-Suite/SQL M/ Datei vom 4.1.2008 mit Größe 14 kB

Quelle xts750.cob Sprache: Cobol

       IDENTIFICATION DIVISION.
       PROGRAM-ID.  XTS750.
       ENVIRONMENT DIVISION.
       CONFIGURATION SECTION.
       SOURCE-COMPUTER.  xyz.
       OBJECT-COMPUTER.  xyz.
       DATA DIVISION.
       WORKING-STORAGE SECTION.

      * Standard COBOL (file "XTS750.SCO") calling SQL
      * procedures in file "XTS750.MCO".

      *Copyright 1995 National Computing Centre Limited
      *and Computer Logic R&D S.A
      *on behalf of the CTS5 SQL2 Project.
      *All rights reserved.
      *The CTS5 SQL2 Project is sponsored by the European Community.
      *
      *The National Computing Centre Limited and Computer Logic R&D
      *have given permission to NIST to distribute this program
      *over the World Wide Web in order to promote SQL standards.
      *DISCLAIMER:
      *This program was reviewed by employees of NIST for
      *conformance to the SQL standards.
      *NIST assumes no responsibility for any party's use of
      *this program.

      ****************************************************************
      *
      *                 COMMENT SECTION
      *
      * SQL VALIDATION TEST SUITE V6.0
      *
      * XTS750.SCO
      * WRITTEN BY: Manolis Megaloikonomou
      * TRANSLATED AUTOMATICALLY FROM EMBEDDED COBOL BY CHRIS SCHANZLE
      *
      * Named domain constraint.
      *
      * REFERENCES
      *   11.21 -- <domain definition>
      *   11.21 SR.6a
      *   11.21 GR.5
      *   11.21 GR.6
      *   10.6  -- <constraint name definition> and
      *                <constraint attributes>
      *   10.6  SR.1
      *   10.6  SR.2
      *   10.6  LR.2a -- Raised. Entry SQL restriction which
      *                  prohibits the use of a
      *                  <constraint name definition>.
      *   11.9  -- <check constraint definition>
      *   F#2   -- Basic information schema.
      *   F#3   -- Basic schema manipulation.
      *   F#25  -- Domain definition.
      *   F#33  -- Constraint tables.
      *   F#49  -- Constraint management.
      *
      * DATE LAST ALTERED  18/12/95 CTS5 Hand-over Test
      *
      * Cleanups and fixes by V. Kogakis 15/12/95
      *        Print timestamp
      *        Include Files
      *        Define NOSUBCLASS/CHCKOK at test beginning
      *
      * QA Status: Full FC
      *
      * Revised by DWF 1996-02-15
      *   Cleanups
      *   Removed field widths
      *   Fixed wrong table reference
      ****************************************************************

      * EXEC SQL BEGIN DECLARE SECTION END-EXEC
       01  SQLCODE PIC S9(9) COMP.
       01  SQLSTATE PIC  X(5).
       01  uid PIC  X(18).
       01  uidx PIC  X(18).
       01  coun PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  cname PIC  X(29).
      *  EXEC SQL END DECLARE SECTION END-EXEC
       01  norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
       01  ALPNUM-TABLE VALUE IS
               "01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
           05  ALPNUM PIC X OCCURS 36 TIMES.
       01  NORMSQ.
           05  NORMSQX PIC X OCCURS 5 TIMES.
       01  errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
      *date_time declaration
       01  TO-DAY PIC 9(6).
       01  THE-TIME PIC 9(8).
       01  flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       01  SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.

       PROCEDURE DIVISION.
       P0.

             MOVE "CTS1 " TO uid
             CALL "AUTHID" USING uid
             MOVE "not logged in, not" TO uidx
      *  EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO;
             CALL "SUB1" USING SQLCODE SQLSTATE uidx
             MOVE SQLCODE TO SQL-COD
      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB2" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
             if (uid  NOT  =   uidx) then
               DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
      -    " connected"
            STOP RUN
             END-IF
             MOVE 0 TO errcnt

             DISPLAY "SQL Test Suite, V6.0, Module COBOL, xts750.sco"
             DISPLAY
           "59-byte ID"
             DISPLAY "TEd Version #"
      *date_time print
           ACCEPT TO-DAY FROM DATE
           ACCEPT THE-TIME FROM TIME
           DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME

      ******************** BEGIN TEST7050 *******************

             MOVE 1 TO flag
             DISPLAY " TEST7050 "
             DISPLAY " Named domain constraint."
             DISPLAY "References:"
             DISPLAY " 11.21 -- "
             DISPLAY " 11.21 SR.6a"
             DISPLAY " 11.21 GR.5"
             DISPLAY " 11.21 GR.6"
             DISPLAY " 10.6 -- and"
             DISPLAY " "
             DISPLAY " 10.6 SR.1"
             DISPLAY " 10.6 SR.2"
             DISPLAY " 10.6 LR.2a -- Raised. Entry SQL restriction
      -    " which"
             DISPLAY " prohibits the use of a"
             DISPLAY " ."
             DISPLAY " 11.9 -- "
             DISPLAY " F#2 -- Basic information schema."
             DISPLAY " F#3 -- Basic schema manipulation."
             DISPLAY " F#25 -- Domain definition."
             DISPLAY " F#33 -- Constraint tables."
             DISPLAY " F#49 -- Constraint management."
             DISPLAY " - - - - - - - - - - - - - - - - - - -"

      *Initialise error reporting variables
             COMPUTE SQLCODE = -1
             MOVE "xxxxx" TO SQLSTATE

      *Create Domain CTS1.D12749
             DISPLAY "CREATE DOMAIN D12749 AS NUMERIC(5)"
             DISPLAY "CONSTRAINT CTS1.CND12749 CHECK(VALUE > 0);"
      *  EXEC SQL CREATE DOMAIN D12749 AS NUMERIC(5)
      *    CONSTRAINT CTS1.CND12749 CHECK(VALUE > 0);
             CALL "SUB3" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
      *  EXEC SQL COMMIT WORK;
             CALL "SUB4" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *initialise host variables
             MOVE 99 TO coun
             MOVE "xxxxxxxxxxxxxxxxxxxxxxxxxxxxx" TO cname

      *Ensure domain constraint is referenced in the information schem
             DISPLAY "SELECT COUNT(*) INTO :coun"
             DISPLAY "FROM INFORMATION_SCHEMA.DOMAIN_CONSTRAINTS"
             DISPLAY "WHERE CONSTRAINT_SCHEMA = 'CTS1' AND DOMAIN_SCHEMA
      -    " = 'CTS1'"
             DISPLAY "AND DOMAIN_NAME = 'D12749';"
      *  EXEC SQL SELECT COUNT(*) INTO :coun
      *    FROM INFORMATION_SCHEMA.DOMAIN_CONSTRAINTS
      *    WHERE CONSTRAINT_SCHEMA = 'CTS1'
      *    AND DOMAIN_SCHEMA = 'CTS1'
      *    AND DOMAIN_NAME = 'D12749';
             CALL "SUB5" USING SQLCODE SQLSTATE coun
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "coun should be 1; its value is ", coun
             DISPLAY  " "
             if ( coun  NOT =  1 ) then
               MOVE 0 TO flag
             END-IF

      *Check that one row is returned and that the CONSTRAINT_NAME
      *column contains the expected <constraint name>
             DISPLAY "SELECT CONSTRAINT_NAME INTO :cname"
             DISPLAY "FROM INFORMATION_SCHEMA.DOMAIN_CONSTRAINTS"
             DISPLAY "WHERE CONSTRAINT_SCHEMA = 'CTS1' AND DOMAIN_SCHEMA
      -    " = 'CTS1'"
             DISPLAY "AND DOMAIN_NAME = 'D12749';"
      *  EXEC SQL SELECT CONSTRAINT_NAME INTO :cname
      *    FROM INFORMATION_SCHEMA.DOMAIN_CONSTRAINTS
      *    WHERE CONSTRAINT_SCHEMA = 'CTS1' AND DOMAIN_SCHEMA =
      *  'CTS1'
      *    AND DOMAIN_NAME = 'D12749';
             CALL "SUB6" USING SQLCODE SQLSTATE cname
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY "cname should be CND12749; its value is ", cname
             if (cname  NOT  =   "CND12749" ) then
               MOVE 0 TO flag
             END-IF
             DISPLAY  " "

             DISPLAY "ROLLBACK WORK;"
      *  EXEC SQL ROLLBACK WORK;
             CALL "SUB7" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

      *Clean-up database
             DISPLAY "DROP DOMAIN D12749 CASCADE;"
      *  EXEC SQL DROP DOMAIN D12749 CASCADE;
             CALL "SUB8" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             DISPLAY "COMMIT WORK;"
      *  EXEC SQL COMMIT WORK;
             CALL "SUB9" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
           PERFORM CHCKOK
             DISPLAY  " "

             if ( flag  =  1 ) then
               DISPLAY " xts750.mco *** pass *** "
      *    EXEC SQL INSERT INTO CTS1.TESTREPORT
      *      VALUES('7050','pass','MCO');
               CALL "SUB10" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
             else
               DISPLAY " xts750.mco *** fail *** "
      *    EXEC SQL INSERT INTO CTS1.TESTREPORT
      *      VALUES('7050','fail','MCO');
               CALL "SUB11" USING SQLCODE SQLSTATE
               MOVE SQLCODE TO SQL-COD
               COMPUTE errcnt = errcnt + 1
             END-IF

             DISPLAY "========================================"

      *  EXEC SQL COMMIT WORK;
             CALL "SUB12" USING SQLCODE SQLSTATE
             MOVE SQLCODE TO SQL-COD
      ******************** END TEST7050 ********************

      **** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
           STOP RUN.

      *    ****  Procedures for PERFORM statements

      *Test SQLCODE and SQLSTATE for normal completion.
       CHCKOK.
             DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
             DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
             PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
             if (SQLCODE NOT =  0  OR   NORMSQ NOT = "00000") then
               MOVE 0 TO flag
             END-IF
             if (NORMSQ = "00000"  AND  NORMSQ NOT = SQLSTATE)
             then
               DISPLAY "Valid implementation-defined SQLSTATE accepted."
             END-IF
             .

       NOSUBCLASS.

      *This routine replaces valid implementation-defined
      *subclasses with 000.  This replacement equates valid
      *implementation-defined subclasses with the 000 value
      *expected by the test case; otherwise the test will fail.
      *After calling NOSUBCLASS, NORMSQ will be tested
      *                          SQLSTATE will be printed.

           MOVE SQLSTATE TO NORMSQ

           MOVE 3 TO norm1
      *subclass begins in position 3 of char array NORMSQ
      *valid subclass begins with 5-9, I-Z, end of ALPNUM table
           PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *Quit if NORMSQ is unchanged.  Subclass is not impl.-def.
      *Changed NORMSQ means implementation-defined subclass,
      *so proceed to zero it out, if valid (0-9,A-Z)
           if (NORMSQ   =   SQLSTATE) then
             GO TO EXIT-NOSUBCLASS
           END-IF

           MOVE 4 TO norm1
      *examining position 4 of char array NORMSQ
      *valid characters are 0-9, A-Z
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

           MOVE 5 TO norm1
      *valid characters are 0-9, A-Z
      *examining position 5 of char array NORMSQ
           PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
           if (NORMSQX(norm1)  =  ALPNUM(norm2)) then
             MOVE "0" TO NORMSQX(norm1)
           END-IF
           END-PERFORM

      *implementation-defined subclasses are allowed for warnings
      *(class = 01).  These equate to successful completion
      *SQLSTATE values of 00000.
      *Reference SQL-92 4.28 SQL-transactions, paragraph 2

           if (NORMSQX(1)  =  "0"  AND  NORMSQX(2)  =  "1") then
             MOVE "0" TO NORMSQX(2)
           END-IF
           .

       EXIT-NOSUBCLASS.
           EXIT.

quality98%

¤ Dauer der Verarbeitung: 0.3 Sekunden (vorverarbeitet) ¤

Wurzel

Suchen

Beweissystem der NASA

Beweissystem Isabelle

NIST Cobol Testsuite

Cephes Mathematical Library

Wiener Entwicklungsmethode

Haftungshinweis

Die Informationen auf dieser Webseite wurden nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit, noch Qualität der bereit gestellten Informationen zugesichert.