|
# This is the original manually generated Makefile. It may still be used
# to build the collector.
#
# Primary targets:
# all - builds gc.a, gccpp.a, gctba.a and cord.a
# base_lib - builds gc.a only (basic library)
# c++ - builds gccpp.a and gctba.a only (C++ interface to library)
# cords - builds cord.a only (heavyweight strings library)
# check - same as "all" but also prints porting information, and runs some
# tests of collector and cords
# check-cpp - builds gc.a, gccpp.a and gctba.a, runs C++ only test
# cord/de - builds dumb editor based on cords.
ABI_FLAG=
# ABI_FLAG should be the cc flag that specifies the ABI. On most
# platforms this will be the empty string. Possible values:
# +DD64 for 64-bit executable on HP/UX.
# -n32, -n64, -o32 for SGI/MIPS ABIs.
AS_ABI_FLAG=$(ABI_FLAG)
# ABI flag for assembler. On HP/UX this is +A64 for 64 bit
# executables.
CC=cc $(ABI_FLAG)
# Compiler executable name. For EMX, replace to "gcc".
CXX=g++ $(ABI_FLAG)
# Needed only for "make c++", which builds the C++ interface.
AS=as $(AS_ABI_FLAG)
# The above doesn't work with gas, which doesn't run cpp.
# Define AS as `gcc -c -x assembler-with-cpp' instead.
# Under Irix 6, you have to specify the ABI (-o32, -n32, or -64)
# if you use something other than the default ABI on your machine.
LD=ld
# Redefining srcdir allows object code for the nonPCR version of the collector
# to be generated in different directories.
srcdir= .
VPATH= $(srcdir)
# Path to atomic_ops source.
AO_SRC_DIR=$(srcdir)/libatomic_ops
CFLAGS_EXTRA=
# We need CFLAGS_FOR_PIC because we might be building a shared library.
CFLAGS= -O -I$(srcdir)/include -I$(AO_SRC_DIR)/src \
-DALL_INTERIOR_POINTERS -DENABLE_DISCLAIM -DGC_ATOMIC_UNCOLLECTABLE \
-DGC_GCJ_SUPPORT -DJAVA_FINALIZATION -DNO_EXECUTE_PERMISSION \
-DUSE_MMAP -DUSE_MUNMAP $(CFLAGS_FOR_PIC) $(CFLAGS_EXTRA)
# To build the collector with threads support, add to the above:
# -DGC_THREADS -DPARALLEL_MARK -DTHREAD_LOCAL_ALLOC
#
# To build the preload library that intercepts malloc, add:
# -DGC_USE_DLOPEN_WRAP -DREDIRECT_MALLOC=GC_malloc -fpic
# To build the collector with fork() support by default, add to the above:
# -DHANDLE_FORK
# HOSTCC and HOSTCFLAGS are used to build executables that will be run as
# part of the build process, i.e. on the build machine. These will usually
# be the same as CC and CFLAGS, except in a cross-compilation environment.
# Note that HOSTCFLAGS should include any -D flags that affect thread support.
HOSTCC=$(CC)
HOSTCFLAGS=$(CFLAGS)
# For dynamic library builds, it may be necessary to add flags to generate
# PIC code, e.g. -fPIC on Linux.
# Setjmp_test may yield overly optimistic results when compiled
# without optimization.
# Look into doc/README.macros for the description of the "define arguments"
# influencing the collector configuration.
CXXFLAGS= $(CFLAGS)
AR= ar
RANLIB= ranlib
# For EMX, replace "ranlib" with "ar s".
OBJS= alloc.o reclaim.o allchblk.o misc.o mach_dep.o os_dep.o mark_rts.o \
headers.o mark.o obj_map.o blacklst.o finalize.o new_hblk.o dbg_mlc.o \
malloc.o checksums.o pthread_support.o pthread_stop_world.o \
darwin_stop_world.o typd_mlc.o ptr_chck.o mallocx.o gcj_mlc.o specific.o \
gc_dlopen.o backgraph.o win32_threads.o pthread_start.o \
thread_local_alloc.o fnlz_mlc.o atomic_ops.o atomic_ops_sysdeps.o
CSRCS= reclaim.c allchblk.c misc.c alloc.c mach_dep.c os_dep.c mark_rts.c \
headers.c mark.c obj_map.c blacklst.c finalize.c \
new_hblk.c dyn_load.c dbg_mlc.c malloc.c \
checksums.c pthread_support.c pthread_stop_world.c darwin_stop_world.c \
typd_mlc.c ptr_chck.c mallocx.c gcj_mlc.c specific.c gc_dlopen.c \
backgraph.c win32_threads.c pthread_start.c thread_local_alloc.c fnlz_mlc.c
CORD_SRCS= cord/cordbscs.c cord/cordxtra.c cord/cordprnt.c cord/tests/de.c \
cord/tests/cordtest.c include/cord.h include/ec.h \
include/cord_pos.h cord/tests/de_win.c cord/tests/de_win.h \
cord/tests/de_cmds.h cord/tests/de_win.rc
CORD_OBJS= cord/cordbscs.o cord/cordxtra.o cord/cordprnt.o
SRCS= $(CSRCS) \
include/gc.h include/gc_typed.h include/gc_tiny_fl.h \
include/gc_version.h include/private/gc_hdrs.h include/private/gc_priv.h \
include/private/gcconfig.h include/private/gc_pmark.h \
include/gc_inline.h include/gc_mark.h include/gc_disclaim.h \
tools/threadlibs.c tools/if_mach.c tools/if_not_there.c gc_badalc.cc \
gc_cpp.cc include/gc_cpp.h include/private/gc_alloc_ptrs.h \
include/gc_allocator.h include/javaxfc.h include/gc_backptr.h \
include/gc_gcj.h include/private/gc_locks.h include/private/dbg_mlc.h \
include/private/specific.h include/leak_detector.h \
include/gc_pthread_redirects.h include/private/gc_atomic_ops.h \
include/gc_config_macros.h include/private/pthread_support.h \
include/private/pthread_stop_world.h include/private/darwin_semaphore.h \
include/private/darwin_stop_world.h include/private/thread_local_alloc.h \
ia64_save_regs_in_stack.s sparc_mach_dep.S \
sparc_netbsd_mach_dep.s $(CORD_SRCS)
CORD_INCLUDE_FILES= $(srcdir)/include/gc.h $(srcdir)/include/cord.h \
$(srcdir)/include/ec.h $(srcdir)/include/cord_pos.h
# Executable file name extension. For EMX, specify ".exe".
EXEEXT=
UTILS= if_mach$(EXEEXT) if_not_there$(EXEEXT) threadlibs$(EXEEXT)
# Libraries needed for curses applications. Only needed for de.
# It might also require -ltermlib on some targets.
CURSES= -lcurses
# The following is irrelevant on most systems. But a few
# versions of make otherwise fork the shell specified in
# the SHELL environment variable.
SHELL= /bin/sh
SPECIALCFLAGS= -I$(srcdir)/include -I$(AO_SRC_DIR)/src $(CFLAGS_FOR_PIC)
# Alternative flags to the C compiler for mach_dep.c.
# Mach_dep.c often doesn't like optimization, and it's
# not time-critical anyway.
# Set SPECIALCFLAGS to -q nodirect_code on Encore.
all: base_lib cords c++
atomic_ops.o: $(AO_SRC_DIR)/src/atomic_ops.c
$(CC) $(CFLAGS) -c -o $@ $(AO_SRC_DIR)/src/atomic_ops.c
# For some reason, Solaris make does not handle "$<" properly.
atomic_ops_sysdeps.o: $(AO_SRC_DIR)/src/atomic_ops_sysdeps.S
$(CC) $(CFLAGS) -c -o $@ $(AO_SRC_DIR)/src/atomic_ops_sysdeps.S
LEAKFLAGS= $(CFLAGS) -DFIND_LEAK
BSD-pkg-all: bsd-libgc.a bsd-libleak.a
bsd-libgc.a bsd-libgccpp.a bsd-libgctba.a:
$(MAKE) -f Makefile.direct CFLAGS="$(CFLAGS)" clean c++-t
mv gc.a bsd-libgc.a
mv gccpp.a bsd-libgccpp.a
mv gctba.a bsd-libgctba.a
bsd-libleak.a:
$(MAKE) -f Makefile.direct CFLAGS="$(LEAKFLAGS)" clean c++-nt
mv gc.a bsd-libleak.a
BSD-pkg-install: BSD-pkg-all
${CP} bsd-libgc.a libgc.a
${INSTALL_DATA} libgc.a ${PREFIX}/lib
${CP} bsd-libgccpp.a libgccpp.a
${INSTALL_DATA} libgccpp.a ${PREFIX}/lib
${CP} bsd-libgctba.a libgctba.a
${INSTALL_DATA} libgctba.a ${PREFIX}/lib
${INSTALL_DATA} gc.h gc_cpp.h ${PREFIX}/include
${INSTALL_MAN} doc/gc.man ${PREFIX}/man/man3/gc.3
pcr: PCR-Makefile include/private/gc_private.h include/private/gc_hdrs.h \
include/private/gc_locks.h include/gc.h include/private/gcconfig.h \
mach_dep.o $(SRCS)
$(MAKE) -f PCR-Makefile depend
$(MAKE) -f PCR-Makefile
$(OBJS) tests/test.o dyn_load.o dyn_load_sunos53.o: \
$(srcdir)/include/private/gc_priv.h \
$(srcdir)/include/private/gc_hdrs.h $(srcdir)/include/private/gc_locks.h \
$(srcdir)/include/gc.h $(srcdir)/include/gc_pthread_redirects.h \
$(srcdir)/include/private/gcconfig.h $(srcdir)/include/gc_typed.h \
$(srcdir)/include/gc_config_macros.h
mark.o typd_mlc.o finalize.o ptr_chck.o: $(srcdir)/include/gc_mark.h \
$(srcdir)/include/private/gc_pmark.h
specific.o pthread_support.o thread_local_alloc.o win32_threads.o: \
$(srcdir)/include/private/specific.h $(srcdir)/include/gc_inline.h \
$(srcdir)/include/private/thread_local_alloc.h
dbg_mlc.o gcj_mlc.o: $(srcdir)/include/private/dbg_mlc.h
tests/test.o: $(srcdir)/tests/test.c
mkdir tests || cat /dev/null
$(CC) $(CFLAGS) -c $(srcdir)/tests/test.c
mv test.o tests/test.o
base_lib gc.a: $(OBJS) dyn_load.o $(UTILS)
rm -f dont_ar_1
./if_mach SPARC SOLARIS touch dont_ar_1
./if_mach SPARC SOLARIS $(AR) rus gc.a $(OBJS) dyn_load.o
./if_mach M68K AMIGA touch dont_ar_1
./if_mach M68K AMIGA $(AR) -vrus gc.a $(OBJS) dyn_load.o
./if_not_there dont_ar_1 || $(AR) ru gc.a $(OBJS) dyn_load.o
./if_not_there dont_ar_1 || $(RANLIB) gc.a || cat /dev/null
echo > base_lib
# Ignore ranlib failure; that usually means it doesn't exist, and
# isn't needed.
cords cord.a: $(CORD_OBJS) $(UTILS)
rm -f dont_ar_3
./if_mach SPARC SOLARIS touch dont_ar_3
./if_mach SPARC SOLARIS $(AR) rus cord.a $(CORD_OBJS)
./if_mach M68K AMIGA touch dont_ar_3
./if_mach M68K AMIGA $(AR) -vrus cord.a $(CORD_OBJS)
./if_not_there dont_ar_3 || $(AR) ru cord.a $(CORD_OBJS)
./if_not_there dont_ar_3 || $(RANLIB) cord.a || cat /dev/null
echo > cords
gc_badalc.o: $(srcdir)/gc_badalc.cc $(srcdir)/include/gc_cpp.h \
$(srcdir)/include/gc.h
$(CXX) -c $(CXXFLAGS) $(srcdir)/gc_badalc.cc
gc_cpp.o: $(srcdir)/gc_cpp.cc $(srcdir)/include/gc_cpp.h $(srcdir)/include/gc.h
$(CXX) -c $(CXXFLAGS) $(srcdir)/gc_cpp.cc
test_cpp$(EXEEXT): $(srcdir)/tests/test_cpp.cc $(srcdir)/include/gc_cpp.h \
$(srcdir)/include/gc.h c++ base_lib $(UTILS)
rm -f test_cpp$(EXEEXT)
./if_mach HP_PA HPUX $(CXX) $(CXXFLAGS) -o test_cpp $(srcdir)/tests/test_cpp.cc gc.a gccpp.a -ldld `./threadlibs`
./if_not_there test_cpp$(EXEEXT) || $(CXX) $(CXXFLAGS) -DGC_NOT_DLL -o test_cpp$(EXEEXT) $(srcdir)/tests/test_cpp.cc gc.a gccpp.a `./threadlibs`
check-cpp: test_cpp$(EXEEXT)
./test_cpp
c++-t: c++ test_cpp$(EXEEXT)
./test_cpp 1
c++-nt: c++
@echo "Use ./test_cpp 1 to test the leak library"
c++ gccpp.a gctba.a: gc_badalc.o gc_cpp.o $(UTILS)
rm -f dont_ar_4
./if_mach SPARC SOLARIS touch dont_ar_4
./if_mach SPARC SOLARIS $(AR) rus gccpp.a gc_badalc.o gc_cpp.o
./if_mach SPARC SOLARIS $(AR) rus gctba.a gc_badalc.o
./if_mach M68K AMIGA touch dont_ar_4
./if_mach M68K AMIGA $(AR) -vrus gccpp.a gc_badalc.o gc_cpp.o
./if_mach M68K AMIGA $(AR) -vrus gctba.a gc_badalc.o
./if_not_there dont_ar_4 || $(AR) ru gccpp.a gc_badalc.o gc_cpp.o
./if_not_there dont_ar_4 || $(RANLIB) gccpp.a || cat /dev/null
./if_not_there dont_ar_4 || $(AR) ru gctba.a gc_badalc.o
./if_not_there dont_ar_4 || $(RANLIB) gctba.a || cat /dev/null
echo > c++
dyn_load_sunos53.o: dyn_load.c
$(CC) $(CFLAGS) -DSUNOS53_SHARED_LIB -c $(srcdir)/dyn_load.c -o $@
# SunOS5 shared library version of the collector
sunos5gc.so: $(OBJS) dyn_load_sunos53.o
$(CC) -G -o sunos5gc.so $(OBJS) dyn_load_sunos53.o -ldl
ln sunos5gc.so libgc.so
# Alpha/OSF shared library version of the collector
libalphagc.so: $(OBJS)
$(LD) -shared -o libalphagc.so $(OBJS) dyn_load.o -lc
ln libalphagc.so libgc.so
# IRIX shared library version of the collector
libirixgc.so: $(OBJS) dyn_load.o
$(LD) -shared $(ABI_FLAG) -o libirixgc.so $(OBJS) dyn_load.o -lc
ln libirixgc.so libgc.so
# Linux shared library version of the collector
liblinuxgc.so: $(OBJS) dyn_load.o
gcc -shared -o liblinuxgc.so $(OBJS) dyn_load.o
ln liblinuxgc.so libgc.so
# Build gctest with dynamic library
dyn_test:
$(CC) $(CFLAGS) -o gctest$(EXEEXT) tests/test.c libgc.so `./threadlibs`
./gctest
# Alternative Linux rule. This is preferable, but is likely to break the
# Makefile for some non-linux platforms.
# LIBOBJS= $(patsubst %.o, %.lo, $(OBJS))
#
#.SUFFIXES: .lo $(SUFFIXES)
#
#.c.lo:
# $(CC) $(CFLAGS) $(CPPFLAGS) -fPIC -c $< -o $@
#
# liblinuxgc.so: $(LIBOBJS) dyn_load.lo
# gcc -shared -Wl,-soname=libgc.so.0 -o libgc.so.0 $(LIBOBJS) dyn_load.lo
# touch liblinuxgc.so
mach_dep.o: $(srcdir)/mach_dep.c $(srcdir)/sparc_mach_dep.S \
$(srcdir)/ia64_save_regs_in_stack.s \
$(srcdir)/sparc_netbsd_mach_dep.s $(UTILS)
rm -f mach_dep.o
./if_mach SPARC LINUX $(CC) -c -o mach_dep2.o $(srcdir)/sparc_mach_dep.S
./if_mach SPARC SOLARIS $(CC) -c -o mach_dep2.o $(srcdir)/sparc_mach_dep.S
./if_mach SPARC OPENBSD $(CC) -c -o mach_dep2.o $(srcdir)/sparc_mach_dep.S
./if_mach SPARC NETBSD $(AS) -o mach_dep2.o $(srcdir)/sparc_netbsd_mach_dep.s
./if_mach SPARC "" $(CC) -c -o mach_dep1.o $(SPECIALCFLAGS) $(srcdir)/mach_dep.c
./if_mach SPARC "" $(LD) -r -o mach_dep.o mach_dep1.o mach_dep2.o
./if_mach IA64 "" $(AS) -o ia64_save_regs_in_stack.o $(srcdir)/ia64_save_regs_in_stack.s
./if_mach IA64 "" $(CC) -c -o mach_dep1.o $(SPECIALCFLAGS) $(srcdir)/mach_dep.c
./if_mach IA64 "" $(LD) -r -o mach_dep.o mach_dep1.o ia64_save_regs_in_stack.o
-./if_not_there mach_dep.o || $(CC) -c $(SPECIALCFLAGS) $(srcdir)/mach_dep.c
-./if_not_there mach_dep.o || `cygpath -w /bin/sh` $(CC) -c $(SPECIALCFLAGS) $(srcdir)/mach_dep.c
-./if_not_there mach_dep.o || /bin/sh $(CC) -c $(SPECIALCFLAGS) $(srcdir)/mach_dep.c
mark_rts.o: $(srcdir)/mark_rts.c $(UTILS)
rm -f mark_rts.o
-./if_mach ALPHA OSF1 $(CC) -c $(CFLAGS) -Wo,-notail $(srcdir)/mark_rts.c
-./if_not_there mark_rts.o || $(CC) -c $(CFLAGS) $(srcdir)/mark_rts.c
-./if_not_there mark_rts.o || `cygpath -w /bin/sh` $(CC) -c $(CFLAGS) $(srcdir)/mark_rts.c
-./if_not_there mark_rts.o || /bin/sh $(CC) -c $(CFLAGS) $(srcdir)/mark_rts.c
# Work-around for DEC optimizer tail recursion elimination bug.
# The ALPHA-specific line should be removed if gcc is used.
alloc.o: include/gc_version.h
cord/cordbscs.o: $(srcdir)/cord/cordbscs.c $(CORD_INCLUDE_FILES)
$(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordbscs.c
mkdir cord || cat /dev/null
mv cordbscs.o cord/cordbscs.o
# not all compilers understand -o filename
cord/cordxtra.o: $(srcdir)/cord/cordxtra.c $(CORD_INCLUDE_FILES)
$(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordxtra.c
mkdir cord || cat /dev/null
mv cordxtra.o cord/cordxtra.o
cord/cordprnt.o: $(srcdir)/cord/cordprnt.c $(CORD_INCLUDE_FILES)
$(CC) $(CFLAGS) -c -I$(srcdir) $(srcdir)/cord/cordprnt.c
mkdir cord || cat /dev/null
mv cordprnt.o cord/cordprnt.o
cordtest$(EXEEXT): $(srcdir)/cord/tests/cordtest.c cords base_lib $(UTILS)
rm -f cordtest$(EXEEXT)
./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o cordtest $(srcdir)/cord/tests/cordtest.c gc.a cord.a -lucb
./if_mach HP_PA HPUX $(CC) $(CFLAGS) -o cordtest $(srcdir)/cord/tests/cordtest.c gc.a cord.a -ldld `./threadlibs`
./if_mach M68K AMIGA $(CC) $(CFLAGS) -UGC_AMIGA_MAKINGLIB -o cordtest $(srcdir)/cord/tests/cordtest.c gc.a cord.a `./threadlibs`
./if_not_there cordtest$(EXEEXT) || $(CC) $(CFLAGS) -o cordtest$(EXEEXT) $(srcdir)/cord/tests/cordtest.c gc.a cord.a `./threadlibs`
cord/de: de$(EXEEXT)
de$(EXEEXT): $(srcdir)/cord/tests/de.c $(srcdir)/cord/tests/de_win.c \
$(srcdir)/cord/tests/de_win.h cords base_lib $(UTILS)
rm -f de$(EXEEXT)
./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o de $(srcdir)/cord/tests/de.c gc.a cord.a -lcurses -ltermlib -lucb `./threadlibs`
./if_mach HP_PA HPUX $(CC) $(CFLAGS) -o de $(srcdir)/cord/tests/de.c gc.a cord.a -lcurses -ltermlib -ldld `./threadlibs`
./if_mach POWERPC AIX $(CC) $(CFLAGS) -o de $(srcdir)/cord/tests/de.c gc.a cord.a -lcurses
./if_mach POWERPC DARWIN $(CC) $(CFLAGS) -o de $(srcdir)/cord/tests/de.c gc.a cord.a
./if_mach M68K AMIGA $(CC) $(CFLAGS) -UGC_AMIGA_MAKINGLIB -o de $(srcdir)/cord/tests/de.c gc.a cord.a -lcurses
./if_not_there de$(EXEEXT) || $(CC) $(CFLAGS) -o de$(EXEEXT) $(srcdir)/cord/tests/de.c $(srcdir)/cord/tests/de_win.c gc.a cord.a $(CURSES) `./threadlibs`
if_mach$(EXEEXT): $(srcdir)/tools/if_mach.c \
$(srcdir)/include/private/gcconfig.h
$(HOSTCC) $(HOSTCFLAGS) -o if_mach$(EXEEXT) $(srcdir)/tools/if_mach.c
threadlibs$(EXEEXT): $(srcdir)/tools/threadlibs.c \
$(srcdir)/include/private/gcconfig.h
$(HOSTCC) $(HOSTCFLAGS) -o threadlibs$(EXEEXT) $(srcdir)/tools/threadlibs.c
if_not_there$(EXEEXT): $(srcdir)/tools/if_not_there.c
$(HOSTCC) $(HOSTCFLAGS) -o if_not_there$(EXEEXT) $(srcdir)/tools/if_not_there.c
clean:
rm -f *.a *.i *.o *.exe tests/*.o gctest gctest_dyn_link test_cpp \
setjmp_test mon.out gmon.out a.out core if_not_there if_mach \
base_lib c++ $(CORD_OBJS) cordtest de cords dont_ar_* threadlibs
-rm -f *~
gctest$(EXEEXT): tests/test.o base_lib $(UTILS)
rm -f gctest$(EXEEXT)
./if_mach SPARC DRSNX $(CC) $(CFLAGS) -o gctest tests/test.o gc.a -lucb
./if_mach HP_PA HPUX $(CC) $(CFLAGS) -o gctest tests/test.o gc.a -ldld `./threadlibs`
./if_mach M68K AMIGA $(CC) $(CFLAGS) -UGC_AMIGA_MAKINGLIB -o gctest tests/test.o gc.a `./threadlibs`
./if_not_there gctest$(EXEEXT) || $(CC) $(CFLAGS) -o gctest$(EXEEXT) tests/test.o gc.a `./threadlibs`
# If an optimized setjmp_test generates a segmentation fault,
# odds are your compiler is broken. Gctest may still work.
# Try compiling setjmp_t.c unoptimized.
setjmp_test$(EXEEXT): $(srcdir)/tools/setjmp_t.c $(srcdir)/include/gc.h \
$(UTILS)
$(CC) $(CFLAGS) -o setjmp_test$(EXEEXT) $(srcdir)/tools/setjmp_t.c
check: cordtest$(EXEEXT) gctest$(EXEEXT) setjmp_test$(EXEEXT) test_cpp$(EXEEXT)
./setjmp_test
./gctest
./cordtest
./test_cpp
# A synonym to "check" (for compatibility with older GC versions).
test: check
# BTL: added to test shared library version of collector.
# Currently works only under SunOS5. Requires GC_INIT call from statically
# loaded client code.
ABSDIR= `pwd`
gctest_dyn_link: tests/test.o libgc.so
$(CC) -L$(ABSDIR) -R$(ABSDIR) -o gctest_dyn_link tests/test.o -lgc -ldl -lthread
gctest_irix_dyn_link: tests/test.o libirixgc.so
$(CC) -L$(ABSDIR) -o gctest_irix_dyn_link tests/test.o -lirixgc
SYM_PREFIX-libgc=GC
reserved_namespace: $(SRCS)
for file in $(SRCS) tests/test.c tests/test_cpp.cc; do \
sed s/GC_/_GC_/g < $$file > tmp; \
cp tmp $$file; \
done
user_namespace: $(SRCS)
for file in $(SRCS) tests/test.c tests/test_cpp.cc; do \
sed s/_GC_/GC_/g < $$file > tmp; \
cp tmp $$file; \
done
[ Dauer der Verarbeitung: 0.6 Sekunden
(vorverarbeitet)
]
|
