|
IDENTIFICATION DIVISION.
PROGRAM-ID. XOP720.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* Embedded SQL COBOL (file "XOP720.PCO")
* Copyright 1994, 1995 X/Open Company Limited
* All rights reserved.
* DISCLAIMER:
* This program was reviewed by employees of NIST for
* conformance to the SQL standards.
* NIST assumes no responsibility for any party's use of
* this program.
* X/Open and the 'X' symbol are registered trademarks of X/Open Company
* Limited in the UK and other countries.
****************************************************************
*
* COMMENT SECTION
*
* DATE 1994/05/05 EMBEDDED C LANGUAGE
* X/Open SQL VALIDATION TEST SUITE V6.0
*
* XOP720.PCO
* WRITTEN BY: E. Pratt
*
* GRANT ALL with optional PRIVILEGES omitted
*
* REFERENCES
* X/Open CAE SQL
* SECTION 5.3.9
*
* <embedded SQL Cobol program>
*
* DATE PROGRAM LAST CHANGED 28/10/94
*
****************************************************************
*Must be run under authorization identifier XOPEN3
EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
01 countr PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ch1 PIC X(2).
01 uid PIC X(18).
01 uidx PIC X(18).
EXEC SQL END DECLARE SECTION END-EXEC
01 errcnt PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 errflg PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*variables for nosubclass routine
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 flag PIC S9(4) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM3 PIC X OCCURS 36 TIMES.
01 SQLSTORE PIC X(5).
01 SQLS2 REDEFINES SQLSTORE.
05 NORMSQ PIC X OCCURS 5 TIMES.
01 NORMSQ2 PIC X(5).
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
DISPLAY "This Program must be run after xop719.pco but"
DISPLAY "before xop721.pco, xop722.pco and xop723.pco"
*Log in as user XOPEN3
MOVE "XOPEN3" TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
EXEC SQL SELECT USER INTO :uidx FROM XOPEN1.ECCO END-EXEC
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid " expected. User ", uidx "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
MOVE 0 TO errflg
DISPLAY "X/OPEN Extensions SQL Test Suite, V6.0, Embedded
- "COBOL, xop720.pco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
*initialise NOSUBCLASS comparison variable
MOVE 1 TO flag
******************** BEGIN TEST0720 *******************
DISPLAY " TEST0720 "
DISPLAY "X/O,GRANT ALL with optional PRIVILEGES omitted "
DISPLAY " X/Open CAE SQL SEC. 5.3.9"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
DISPLAY "### SELECT COUNT(*) INTO :countr FROM XOPEN1.AAA;"
DISPLAY "### SELECT A1 INTO :ch1 FROM XOPEN1.AAA "
DISPLAY "### WHERE A2 = 'AB';"
DISPLAY "### UPDATE XOPEN1.AAA SET A1 = 'EP' WHERE A2 =
- " 'AB'; "
DISPLAY "### SELECT A1 INTO :ch1 FROM XOPEN1.AAA "
DISPLAY "### WHERE A2 = 'AB';"
DISPLAY "### INSERT INTO XOPEN1.AAA
- " VALUES('XX','YY','ZZ');"
DISPLAY "### SELECT COUNT(*) INTO :countr FROM XOPEN1.AAA;"
DISPLAY "### DELETE FROM XOPEN1.BBB WHERE B1 = 'BA';"
DISPLAY "### UPDATE XOPEN1.BBB SET B1 ='SP' WHERE B2='BE';"
DISPLAY "### INSERT INTO XOPEN1.BBB
- " VALUES('XX','YY','ZZ');"
DISPLAY "### INSERT INTO XOPEN1.BBB
- " VALUES('XB','YB','BF');"
DISPLAY "### SELECT COUNT(*) INTO :countr FROM XOPEN1.CCC;"
DISPLAY "### INSERT INTO XOPEN1.CCC
- " VALUES('XC','YC','BC');"
DISPLAY "================================================="
*Check the number of rows in table AAA is correct
MOVE 0 TO countr
EXEC SQL SELECT COUNT(*) INTO :countr FROM XOPEN1.AAA
END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "Number of rows should be 4, it is ", countr
if (countr NOT = 4) then
DISPLAY "*** Problem found (TEST STEP NUMBER 1) ! *** "
COMPUTE errflg = errflg + 1
END-IF
DISPLAY "================================================="
*Check that a row can be selected from table AAA
MOVE "x" TO SQLSTATE
EXEC SQL SELECT A1 INTO :ch1 FROM XOPEN1.AAA
WHERE A2 = 'AB' END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "ch1 should be AA , it is ", ch1
PERFORM CHCKOK
if (NORMSQ2 NOT = "00000" AND ch1 NOT = "AA") then
DISPLAY "*** Problem found (TEST STEP NUMBER 2) ! *** "
COMPUTE errflg = errflg + 1
END-IF
DISPLAY "================================================="
*Check that a value in a row can be updated
MOVE " " TO ch1
MOVE "x" TO SQLSTATE
EXEC SQL UPDATE XOPEN1.AAA SET A1 = 'EP'
WHERE A2 = 'AB' END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
if (NORMSQ2 NOT = "00000" AND SQLCODE NOT = 0) then
DISPLAY "*** Problem found (TEST STEP NUMBER 3) ! *** "
COMPUTE errflg = errflg + 1
END-IF
DISPLAY "================================================="
*Check that the updated row has the expected value
MOVE "x" TO SQLSTATE
EXEC SQL SELECT A1 INTO :ch1 FROM XOPEN1.AAA
WHERE A2 = 'AB' END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "ch1 should be EP , it is ", ch1
PERFORM CHCKOK
if (NORMSQ2 NOT = "00000" AND ch1 NOT = "EP") then
DISPLAY "*** Problem found (TEST STEP NUMBER 4) ! *** "
COMPUTE errflg = errflg + 1
END-IF
DISPLAY "================================================="
*user id XOPEN3 does not have INSERT priviledges on XOPEN1.AAA
MOVE "x" TO SQLSTATE
EXEC SQL INSERT INTO XOPEN1.AAA
VALUES('XX','YY','ZZ') END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLSTATE should be 42000 , it is ", SQLSTATE
PERFORM NOSUBCLASS THROUGH P213.
if (NORMSQ2 NOT = "42000") then
DISPLAY "*** Problem found (TEST STEP NUMBER 5) ! *** "
COMPUTE errflg = errflg + 1
END-IF
DISPLAY "================================================="
*Check that the number of rows in AAA remained the same
MOVE 0 TO countr
EXEC SQL SELECT COUNT(*) INTO :countr FROM XOPEN1.AAA
END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "Number of rows should be 4, it is ", countr
if (countr NOT = 4) then
DISPLAY "*** Problem found (TEST STEP NUMBER 6) ! *** "
COMPUTE errflg = errflg + 1
END-IF
DISPLAY "================================================="
*Check that a row can be deleted, XOPEN2 is able to
*grant SELECT, INSERT, DELETE to XOPEN3 (see xop719.pco)
MOVE "x" TO SQLSTATE
EXEC SQL DELETE FROM XOPEN1.BBB WHERE B1 = 'BA' END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
if (NORMSQ2 NOT = "00000" AND SQLCODE NOT = 0) then
DISPLAY "*** Problem found (TEST STEP NUMBER 7) ! *** "
COMPUTE errflg = errflg + 1
END-IF
EXEC SQL ROLLBACK WORK END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "================================================="
*Check that a row in table BBB cannot be updated
*grant SELECT, INSERT, DELETE (but not UPDATE) to XOPEN3 (see xop719.pco)
MOVE "x" TO SQLSTATE
EXEC SQL UPDATE XOPEN1.BBB SET B1 = 'SP'
WHERE B2 = 'BE' END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLSTATE should be 42000 , it is ", SQLSTATE
PERFORM NOSUBCLASS THROUGH P213.
if (NORMSQ2 NOT = "42000") then
DISPLAY "*** Problem found (TEST STEP NUMBER 8) ! *** "
COMPUTE errflg = errflg + 1
END-IF
DISPLAY "================================================="
*Check that a row, that does not duplicate any values
*already in table BBB, can be inserted
MOVE "x" TO SQLSTATE
EXEC SQL INSERT INTO XOPEN1.BBB
VALUES('XX','YY','ZZ') END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
if (NORMSQ2 NOT = "00000" AND SQLCODE NOT = 0) then
DISPLAY "*** Problem found (TEST STEP NUMBER 9) ! *** "
COMPUTE errflg = errflg + 1
END-IF
DISPLAY "================================================="
*Check that a row, that duplicates a value in the
*UNIQUE constrained field, cannot be inserted
MOVE "x" TO SQLSTATE
EXEC SQL INSERT INTO XOPEN1.BBB
VALUES('XB','YB','BF') END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLSTATE should be 23000 , it is ", SQLSTATE
PERFORM NOSUBCLASS THROUGH P213.
if (NORMSQ2 NOT = "23000") then
DISPLAY "*** Problem found (TEST STEP NUMBER 10) ! *** "
COMPUTE errflg = errflg + 1
END-IF
DISPLAY "================================================="
*Check that SELECT on table CCC does not work, XOPEN3 was not
*granted this privilege
MOVE "x" TO SQLSTATE
MOVE 0 TO countr
EXEC SQL SELECT COUNT(*) INTO :countr FROM XOPEN1.CCC
END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLSTATE should be 42000 , it is ", SQLSTATE
PERFORM NOSUBCLASS THROUGH P213.
if (NORMSQ2 NOT = "42000") then
DISPLAY "*** Problem found (TEST STEP NUMBER 11) ! *** "
COMPUTE errflg = errflg + 1
END-IF
DISPLAY "================================================="
*Check that INSERT on table CCC does not work, XOPEN3 was not
*granted this privilege
MOVE "x" TO SQLSTATE
EXEC SQL INSERT INTO XOPEN1.CCC
VALUES('XC','YC','BC') END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLSTATE should be 42000 , it is ", SQLSTATE
PERFORM NOSUBCLASS THROUGH P213.
if (NORMSQ2 NOT = "42000") then
DISPLAY "*** Problem found (TEST STEP NUMBER 12) ! *** "
COMPUTE errflg = errflg + 1
END-IF
DISPLAY "================================================="
*No ROLLBACK - This program is part of a set, run
*together, xop719.pco and xop720.pco to xop723.pco
DISPLAY "number of errors detected = ", errflg " "
DISPLAY "### maximum number of errors is 12 ###"
DISPLAY " "
DISPLAY "### Program xop719 MUST be run before ###"
DISPLAY "### this program can be re-run ###"
if (errflg = 0) then
EXEC SQL INSERT INTO XOPEN1.TESTREPORT
VALUES('0720','pass','PCO') END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY " xop720.pco *** pass *** "
else
EXEC SQL INSERT INTO XOPEN1.TESTREPORT
VALUES('0720','fail','PCO') END-EXEC
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
DISPLAY " xop720.pco *** fail *** "
END-IF
DISPLAY "================================================="
DISPLAY " "
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
******************** END TEST0720 *******************
****** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
NOSUBCLASS.
*This routine replaces valid implementation defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will
*fail. After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed
MOVE SQLSTATE TO SQLSTORE
*subclass begins in position 3 of char array NORMSQ
MOVE 3 TO norm1
MOVE 14 TO norm2
PERFORM UNTIL norm2 > 36
if (NORMSQ(norm1) = ALPNUM3(norm2)) then
MOVE '0' TO NORMSQ(norm1)
END-IF
ADD 1 TO norm2
END-PERFORM
MOVE SQLS2 TO NORMSQ2
if (NORMSQ2 = SQLSTATE) then
GO TO P213
END-IF
*Quit if NORMSQ is unchanged. Subclass is not impl.def
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9, A-Z)
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
MOVE 1 TO norm2
PERFORM UNTIL norm2 > 36
if (NORMSQ(norm1) = ALPNUM3(norm2)) then
MOVE '0' TO NORMSQ(norm1)
END-IF
ADD 1 TO norm2
END-PERFORM
MOVE 5 TO norm1
*examining position 5 of char array NORMSQ
MOVE 1 TO norm2
PERFORM UNTIL norm2 > 36
if (NORMSQ(norm1) = ALPNUM3(norm2)) then
MOVE '0' TO NORMSQ(norm1)
END-IF
ADD 1 TO norm2
END-PERFORM
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*reference SQL-92. 4.28 SQL-transactions, paragraph 2
if (NORMSQ(1) = '0' AND NORMSQ(2) = '1') then
MOVE '0' TO NORMSQ(2)
END-IF
MOVE SQLS2 TO NORMSQ2.
P213.
*Test SQLCODE and SQLSTATE for normal completion
CHCKOK.
MOVE 1 TO flag
DISPLAY "SQLCODE should be '0'; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THROUGH P213.
if (SQLCODE NOT = 0 or NORMSQ2 NOT = "00000") then
MOVE 0 TO flag
END-IF
if (flag = 1 AND NORMSQ2 NOT = SQLSTATE) then
DISPLAY "Valid implementation defined SQLSTATE accepted."
END-IF
.
¤ Dauer der Verarbeitung: 0.5 Sekunden
(vorverarbeitet)
¤
|
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
