IDENTIFICATION DIVISION.
PROGRAM-ID. YTS757.
ENVIRONMENT DIVISION.
CONFIGURATION SECTION.
SOURCE-COMPUTER. xyz.
OBJECT-COMPUTER. xyz.
DATA DIVISION.
WORKING-STORAGE SECTION.
* EMBEDDED COBOL (file "YTS757.PCO")
*Copyright 1996 National Computing Centre Limited,
*and Computer Logic R&D S.A
*on behalf of the CTS5 SQL2 Project.
*All rights reserved.
*The CTS5 SQL2 Project is sponsored by the European Community.
*
*The National Computing Centre Limited and Computer Logic R&D
*have given permission to NIST to distribute this program
*over the World Wide Web in order to promote SQL standards.
*DISCLAIMER:
*This program was reviewed by employees of NIST for
*conformance to the SQL standards.
*NIST assumes no responsibility for any party's use of
*this program.
****************************************************************
*
* COMMENT SECTION
*
* SQL VALIDATION TEST SUITE V6.0
*
* YTS757.PCO
* WRITTEN BY: Susan Watters
* TRANSLATED AUTOMATICALLY FROM EMBEDDED C BY CHRIS SCHANZLE
*
* INSERT Values in column defined on a domain
*
*
* REFERENCES
* 11.21 <domain definition>
* 11.4 <column definition>
* 11.3 <table definition>
* 13.8 <insert statement>
* F#25 Domain definition
* F#3 Basic schema manipulation
*
* DATE LAST ALTERED 02.01.96 CTS5 Hand-over Test
*
* QA Status: Full FC
*
* Revised by DWF 1996-03-05
* Added rollback after authid
* Cleanup
* Removed EXEC SQL from inside printfs
* Moved table used by both tests outside of tests
* Fixed printouts
* Fixed wrong values inserted
****************************************************************
EXEC SQL BEGIN DECLARE SECTION END-EXEC
01 SQLCODE PIC S9(9) COMP.
01 SQLSTATE PIC X(5).
01 co PIC X(1).
01 co2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 uid PIC X(18).
01 uidx PIC X(18).
EXEC SQL END DECLARE SECTION END-EXEC
01 norm1 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 norm2 PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 ALPNUM-TABLE VALUE IS
"01234ABCDEFGH56789IJKLMNOPQRSTUVWXYZ".
05 ALPNUM PIC X OCCURS 36 TIMES.
01 NORMSQ.
05 NORMSQX PIC X OCCURS 5 TIMES.
01 errcnt PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
*date_time declaration
01 TO-DAY PIC 9(6).
01 THE-TIME PIC 9(8).
01 flag PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
01 SQL-COD PIC S9(9) DISPLAY SIGN LEADING SEPARATE.
PROCEDURE DIVISION.
P0.
MOVE "CTS1 " TO uid
CALL "AUTHID" USING uid
MOVE "not logged in, not" TO uidx
EXEC SQL SELECT USER INTO :uidx FROM CTS1.ECCO END-EXEC
MOVE SQLCODE TO SQL-COD
EXEC SQL ROLLBACK WORK END-EXEC
MOVE SQLCODE TO SQL-COD
if (uid NOT = uidx) then
DISPLAY "ERROR: User ", uid, " expected. User ", uidx, "
- " connected"
STOP RUN
END-IF
MOVE 0 TO errcnt
DISPLAY "SQL Test Suite, V6.0, Embedded COBOL, yts757.pco"
DISPLAY
"59-byte ID"
DISPLAY "TEd Version #"
*date_time print
ACCEPT TO-DAY FROM DATE
ACCEPT THE-TIME FROM TIME
DISPLAY "Date run YYMMDD: " TO-DAY " at hhmmssff: " THE-TIME
*Create table used by both tests
DISPLAY "CREATE TABLE dom_chk"
DISPLAY "(col1 atom,"
DISPLAY " col2 smint);"
EXEC SQL CREATE TABLE dom_chk
(col1 atom,
col2 smint) END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLSTATE should be 00000; it is ", SQLSTATE
DISPLAY "COMMIT WORK;"
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLSTATE should be 00000; it is ", SQLSTATE
******************** BEGIN TEST7507 *******************
MOVE 1 TO flag
DISPLAY " TEST7507 "
DISPLAY " INSERT value in column defined on domain"
DISPLAY "References:"
DISPLAY " 11.21 "
DISPLAY " 11.4 "
DISPLAY " 11.3 "
DISPLAY " 13.8 "
DISPLAY " F#25 Domain definition"
DISPLAY " F#3 Basic schema manipulation"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
MOVE "x" TO co
MOVE 99 TO co2
*create a table which uses domains atom and smint
*These are defined in cts5sch2.smi
*integer domain 'smint' range 1 to 100
*reference character domain 'atom' range 'a' to 'm'
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
*insert a row into dom_chk
DISPLAY "Insert a correct row into dom_chk"
DISPLAY "INSERT INTO dom_chk VALUES ('c',38);"
EXEC SQL INSERT INTO dom_chk VALUES ('c',38) END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*Check row has inserted correctly
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
DISPLAY "SELECT col1, col2 INTO :co, :co2 FROM dom_chk;"
EXEC SQL SELECT col1, col2 INTO :co, :co2 FROM dom_chk
END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "co should be c; its value is ", co
DISPLAY "co2 should be 38; its value is ", co2
if (co NOT = "c" OR co2 NOT = 38) then
MOVE 0 TO flag
END-IF
*check scope of domains
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
DISPLAY "INSERT INTO dom_chk VALUES ('a',1);"
EXEC SQL INSERT INTO dom_chk VALUES ('a',1) END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
DISPLAY "INSERT INTO dom_chk VALUES ('m', 100);"
EXEC SQL INSERT INTO dom_chk VALUES ('m', 100) END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
*attempt to insert incorrect value into table
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
DISPLAY "INSERT INTO dom_chk VALUES ('z', 101);"
EXEC SQL INSERT INTO dom_chk VALUES ('z', 101) END-EXEC
MOVE SQLCODE TO SQL-COD
*That should generate an integrity constraint violation
*which is SQLSTATE 23000
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
if (SQLCODE NOT < 0) then
MOVE 0 TO flag
END-IF
DISPLAY "SQLSTATE should be 23000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (NORMSQ NOT = "23000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "23000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
DISPLAY " "
*check that the table does not contain that row
MOVE 1 TO co2
DISPLAY "SELECT COUNT (*) INTO :co2 FROM dom_chk"
DISPLAY "WHERE col1 = 'z';"
EXEC SQL SELECT COUNT (*) INTO :co2 FROM dom_chk
WHERE col1 = 'z' END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "co2 should be 0; its value is ", co2
if (co2 NOT = 0) then
MOVE 0 TO flag
END-IF
*Attempt to update row with value that breaks dom constraint
DISPLAY "UPDATE dom_chk"
DISPLAY "SET col1 = 'q'"
DISPLAY "WHERE col2 = 38;"
EXEC SQL UPDATE dom_chk
SET col1 = 'q'
WHERE col2 = 38 END-EXEC
MOVE SQLCODE TO SQL-COD
*That should generate an integrity constraint violation
*which is SQLSTATE 23000
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
if (SQLCODE NOT < 0) then
MOVE 0 TO flag
END-IF
DISPLAY "SQLSTATE should be 23000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (NORMSQ NOT = "23000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "23000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
DISPLAY " "
*check that the table does not contain that row
MOVE 1 TO co2
DISPLAY "SELECT COUNT (*) INTO :co2 FROM dom_chk"
DISPLAY "WHERE col1 = 'q';"
EXEC SQL SELECT COUNT (*) INTO :co2 FROM dom_chk
WHERE col1 = 'q' END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY "co2 should be 0; its value is ", co2
if (co2 NOT = 0) then
MOVE 0 TO flag
END-IF
DISPLAY "ROLLBACK WORK;"
EXEC SQL ROLLBACK WORK END-EXEC
MOVE SQLCODE TO SQL-COD
PERFORM CHCKOK
DISPLAY " "
if ( flag = 1 ) then
DISPLAY " yts757.pco *** pass *** "
EXEC SQL INSERT INTO CTS1.TESTREPORT
VALUES('7507','pass','PCO') END-EXEC
MOVE SQLCODE TO SQL-COD
else
DISPLAY " yts757.pc *** fail *** "
EXEC SQL INSERT INTO CTS1.TESTREPORT
VALUES('7507','fail','PCO') END-EXEC
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
******************** END TEST7507 ********************
******************** BEGIN TEST7508 *******************
MOVE 1 TO flag
DISPLAY " TEST7508 "
DISPLAY " Put value in col defined on dom breaking
- " constraint"
DISPLAY "References:"
DISPLAY " 11.21 "
DISPLAY " 11.3 "
DISPLAY " 11.4 "
DISPLAY " 11.25 "
DISPLAY " F#25 Domain definition"
DISPLAY " F#3 Basic schema manipulation"
DISPLAY " - - - - - - - - - - - - - - - - - - -"
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
*dom_chk contains two cols referencing two domains
*first has range 'a' to 'm'
*second has range 1 to 100
*Insert into dom_chk values that break first domain constraint
DISPLAY "INSERT INTO dom_chk VALUES ('<', 100);"
EXEC SQL INSERT INTO dom_chk VALUES ('<', 100) END-EXEC
MOVE SQLCODE TO SQL-COD
*That should generate an integrity constraint violation
*which is SQLSTATE 23000
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
if (SQLCODE NOT < 0) then
MOVE 0 TO flag
END-IF
DISPLAY "SQLSTATE should be 23000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (NORMSQ NOT = "23000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "23000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
*Insert into dom_chk values to break second domain constraint
COMPUTE SQLCODE = -1
MOVE "xxxxx" TO SQLSTATE
DISPLAY "INSERT INTO dom_chk VALUES ('a', 101);"
EXEC SQL INSERT INTO dom_chk VALUES ('a', 101) END-EXEC
MOVE SQLCODE TO SQL-COD
*That should generate an integrity constraint violation
*which is SQLSTATE 23000
DISPLAY "SQLCODE should be < 0; its value is ", SQL-COD
if (SQLCODE NOT < 0) then
MOVE 0 TO flag
END-IF
DISPLAY "SQLSTATE should be 23000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (NORMSQ NOT = "23000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "23000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
DISPLAY "ROLLBACK WORK;"
EXEC SQL ROLLBACK WORK END-EXEC
MOVE SQLCODE TO SQL-COD
if ( flag = 1 ) then
DISPLAY " yts757.pco *** pass *** "
EXEC SQL INSERT INTO CTS1.TESTREPORT
VALUES('7508','pass','PCO') END-EXEC
MOVE SQLCODE TO SQL-COD
else
DISPLAY " yts757.pco *** fail *** "
EXEC SQL INSERT INTO CTS1.TESTREPORT
VALUES('7508','fail','PCO') END-EXEC
MOVE SQLCODE TO SQL-COD
COMPUTE errcnt = errcnt + 1
END-IF
DISPLAY "==============================================="
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
******************** END TEST7508 ********************
*Clean up
DISPLAY "DROP TABLE dom_chk CASCADE;"
EXEC SQL DROP TABLE dom_chk CASCADE END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLSTATE should be 00000; it is ", SQLSTATE
DISPLAY "COMMIT WORK;"
EXEC SQL COMMIT WORK END-EXEC
MOVE SQLCODE TO SQL-COD
DISPLAY "SQLSTATE should be 00000; it is ", SQLSTATE
**** TESTER MAY CHOOSE TO INSERT CODE FOR errcnt > 0
STOP RUN.
* **** Procedures for PERFORM statements
*Test SQLCODE and SQLSTATE for normal completion.
CHCKOK.
DISPLAY "SQLCODE should be 0; its value is ", SQL-COD
DISPLAY "SQLSTATE should be 00000; its value is ", SQLSTATE
PERFORM NOSUBCLASS THRU EXIT-NOSUBCLASS
if (SQLCODE NOT = 0 OR NORMSQ NOT = "00000") then
MOVE 0 TO flag
END-IF
if (NORMSQ = "00000" AND NORMSQ NOT = SQLSTATE)
then
DISPLAY "Valid implementation-defined SQLSTATE accepted."
END-IF
.
NOSUBCLASS.
*This routine replaces valid implementation-defined
*subclasses with 000. This replacement equates valid
*implementation-defined subclasses with the 000 value
*expected by the test case; otherwise the test will fail.
*After calling NOSUBCLASS, NORMSQ will be tested
* SQLSTATE will be printed.
MOVE SQLSTATE TO NORMSQ
MOVE 3 TO norm1
*subclass begins in position 3 of char array NORMSQ
*valid subclass begins with 5-9, I-Z, end of ALPNUM table
PERFORM VARYING norm2 FROM 14 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*Quit if NORMSQ is unchanged. Subclass is not impl.-def.
*Changed NORMSQ means implementation-defined subclass,
*so proceed to zero it out, if valid (0-9,A-Z)
if (NORMSQ = SQLSTATE) then
GO TO EXIT-NOSUBCLASS
END-IF
MOVE 4 TO norm1
*examining position 4 of char array NORMSQ
*valid characters are 0-9, A-Z
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
MOVE 5 TO norm1
*valid characters are 0-9, A-Z
*examining position 5 of char array NORMSQ
PERFORM VARYING norm2 FROM 1 BY 1 UNTIL norm2 > 36
if (NORMSQX(norm1) = ALPNUM(norm2)) then
MOVE "0" TO NORMSQX(norm1)
END-IF
END-PERFORM
*implementation-defined subclasses are allowed for warnings
*(class = 01). These equate to successful completion
*SQLSTATE values of 00000.
*Reference SQL-92 4.28 SQL-transactions, paragraph 2
if (NORMSQX(1) = "0" AND NORMSQX(2) = "1") then
MOVE "0" TO NORMSQX(2)
END-IF
.
EXIT-NOSUBCLASS.
EXIT.
¤ Dauer der Verarbeitung: 0.31 Sekunden
(vorverarbeitet)
¤
Haftungshinweis
Die Informationen auf dieser Webseite wurden
nach bestem Wissen sorgfältig zusammengestellt. Es wird jedoch weder Vollständigkeit, noch Richtigkeit,
noch Qualität der bereit gestellten Informationen zugesichert.
Bemerkung:
Die farbliche Syntaxdarstellung ist noch experimentell.
|
|
|
|
|
